Netgear orporated 13300240 User Manual

STS7000 Home Security Touch

Screen Installation Guide

Note: This document is for certification purposes. Images are

for position only and might differ from the actual product.

Package Contents

Touch Screen

Stand

12V power adapter

USB adapter

2

Hardware Features

The Touch Screen includes a stand and controls as shown here.

• Stand. To put the Touch Screen in an upright position, position

the device in the stand.

3

• 12V power adapter input. To recharge the battery or to run on

electricity instead of the battery, plug the power cord into the 12V
power adapter input.

Configure the Touch Screen

 To configure the touch screen for use with a wireless

network:

1. Plug the USB adapter into the USB port on the back of the

Touch Screen.

4

2. Connect the adapter to the gateway device LAN port with an

Ethernet cable.

3. Plug the power adapter into the 12V power adapter input.

5

Add the Touch Screen

 To add the Touch Screen to your wireless network:

1. Open your web browser.

2. In the address bar, type: https://www.example.com.

A sign-in screen displays.

3. Type your user name and password.

4. Click Sign In.

6