Netgear orporated 10400146 Users Manual

Push 2 TV Adapter
(PTV2000)/Intel Wireless
Display User Manual

NETGEAR, Inc.

350 East Plumeria Drive
San Jose, CA 95134

202-10591-01
January 2011

© 2011 by NETGEAR, Inc. All rights reserved..

Technical Support

Please refer to the support information card that shipped with your product. By registering your product at

http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product

and software upgrades.

NETGEAR, INC. Support Information

Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.

E-mail: [e-mail]

North American NETGEAR website: http://www.netgear.com

Trademarks

NETGEAR, the NETGEAR logo, ProSafe, Smart Wizard, and Auto Uplink are trademarks or registered trademarks of
NETGEAR, Inc. Microsoft, Windows, Windows NT and Vista are registered trademarks of Microsoft Corporation.Other
brand and product names are registered trademarks or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.

Certificate of the Manufacturer/Importer

It is hereby certified that the Push 2 TV Adapter (PTV2000)/Intel Wireless Display has been suppressed in accordance
with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for
example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please
refer to the notes in the operating instructions.

The Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.

Bestätigung des Herstellers/Importeurs

Es wird hiermit bestätigt, daß dasPush 2 TV Adapter (PTV2000)/Intel Wireless Display gemäß der im BMPT­AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben
einiger Geräte (z.B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die
Anmerkungen in der Betriebsanleitung.

Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.

Voluntary Control Council for Interference (VCCI) Statement

This equipment is in the Class B category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used
near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling.

ii

v1.0, January 2011

Regulatory Compliance Information

This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result
in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.

NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country.

Therefore, all options described in this user's guide may not be available in your version of the product.

Europe – EU Declaration of Conformity

Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
European Union (1999/5/EC). This equipment meets the following conformance standards:

EN300 328, EN301 489-17, EN60950

Visit the NETGEAR EU Declarations of Conformity website at:

http://kb.netgear.com/app/answers/detail/a_id/11621/sno/0

FCC Requirements for Operation in the United States

FCC Information to User

This product does not contain any user serviceable components and is to be used with approved antennas only. Any
product changes or modifications will invalidate all applicable regulatory certifications and approvals

FCC Guidelines for Human Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Declaration Of Conformity

We NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the model
PTV2000 Push 2 TV Adapter (PTV2000)/Intel Wireless Display complies with Part 15 of FCC Rules. Operation is
subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that may cause undesired operation.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

v1.0, January 2011

iii

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate this equipment.

Canada Caution:

Industry Canada regulatory information Operation is subject to the following two conditions: (1)this device may
not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device. The user is cautioned that this device should be used only as specified within this
manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to
excessive RF exposure conditions.

This device is operation in 5.15 – 5.25GHz frequency range, then restricted in indoor use only.

Product and Publication Details

Model Number: PTV2000

Publication Date: January 2011

Product Family: Wireless Adapter

Product Name: Push2TV

Home or Business Product: Home

Language: English

Publication Part Number: 202-10591-01

Publication Version Number: 1.0

iv

v1.0, January 2011

Contents

Push 2 TV Adapter (PTV2000)/Intel Wireless Display User Manual

About This Manual

Conventions, Formats, and Scope ................................................................................... ix

Revision History ................................................................................................................. x

Chapter 1
Connecting

Using Intel Wireless Display ...........................................................................................1-1

Step 1: Opening Intel Wireless Display on the Laptop .............................................1-1

Step 2: Windows Firewall Security Alert ..................................................................1-2

Step 3: Consenting to the License Agreement .........................................................1-2

Step 4: Scanning for Adapters .................................................................................1-3

Step 5: Detected Adapter ......................................................................................... 1-3

Detected Adapters Column Information ...................................................................1-3

Step 6: Connecting to the TV ...................................................................................1-4

Step 7: Connected to the Adapter ............................................................................ 1-4

Step 8: Ready to Use Intel Wireless Display ............................................................1-4

First Time Connection Procedures .................................................................................1-5

Changing the TV Input .............................................................................................1-5

Step 1: Entering a Security Code ............................................................................. 1-6

Step 2: Security Configuration Successful ...............................................................1-7

Step 3: Adapter is Connected ..................................................................................1-7

Step 4: Rename Adapter ..........................................................................................1-7

Step 5: Finishing the Initial Set Up Process .............................................................1-8

Initial Set Up Troubleshooting ..................................................................................1-8

Disconnecting ...........................................................................................................1-8

Exiting ......................................................................................................................1-9

Chapter 2 Troubleshooting

Initial Set Up Problems ...................................................................................................2-1

v1.0, January 2011

v

Push 2 TV Adapter (PTV2000)/Intel Wireless Display User Manual

Cords and Cables ....................................................................................................2-1

On/Off Button ...........................................................................................................2-2

Changing the TV Input .............................................................................................2-2

Adapter Encountered a Problem on Startup ............................................................2-3

There are No Adapters Detected .............................................................................2-3

Security Code Issues ...............................................................................................2-3

TV Image is Rough, Frozen or Delayed ...................................................................2-3

Your Video Mode has Changed... ............................................................................2-4

Unsupported Audio Mode ........................................................................................2-4

Intel Wireless Display Requires a Different Security Profile ...........................................2-4

Security Profile is Incorrect ......................................................................................2-4

Manually Setting the Correct Security Profile ...........................................................2-5

Your Wireless is Off .................................................................................................2-5

Intel My WiFi Technology is Disabled ......................................................................2-5

Unsupported Laptop Hardware ................................................................................2-5

Firewall Issues .........................................................................................................2-6

Windows Power Saving ...........................................................................................2-6

Could Not Obtain a Network Address ......................................................................2-6

Adapter Does Not Work ...........................................................................................2-6

Checking the Access Point Frequency ....................................................................2-7

Common Solutions to Many Issues ................................................................................2-7

Known Issues .................................................................................................................2-8

FAQs ..............................................................................................................................2-8

How do I Change the Adapter Display Language ....................................................2-9

How do I Update the Firmware? ..............................................................................2-9

How do I Reset the Application Settings? ................................................................2-9

How do I Reset the Adapter? ...................................................................................2-9

How do I Clear the Adapter Memory? ....................................................................2-10

Can I Close the Laptop Lid and Still Use Intel Wireless Display? ..........................2-10

What are Adapter Properties? ................................................................................2-10

Audio/Visual Tuning ...............................................................................................2-11

Why does My Laptop's Color Look Different on My TV? .......................................2-11

How do I Adjust the TV Display Image? .................................................................2-11

How do I Adjust the Audio? ....................................................................................2-11

Sample Audio Testing ............................................................................................2-11

vi

v1.0, January 2011

Global Volume Control ...........................................................................................2-12

Windows Audio Mixer .............................................................................................2-12

Changing the Sound using the Windows Control Panel ........................................2-12

How do I Train My Displays? .................................................................................2-12

Can I play DVDs with Intel Wireless Display? ........................................................2-13

How do I Contact Customer Support? ...................................................................2-13

What is Auto-Connect ............................................................................................2-13

Appendix A
Technical Specifications

Appendix B
Related Documents

Push 2 TV Adapter (PTV2000)/Intel Wireless Display User Manual

v1.0, January 2011

vii

About This Manual

The NETGEAR®Push 2 TV Adapter (PTV2000)/Intel® Wireless Display User Manual describes
how to install, configure and troubleshoot the Push 2 TV Adapter (PTV2000)/Intel Wireless
Display. The information in this manual is intended for readers with intermediate computer and
Internet skills.

Conventions, Formats, and Scope

The conventions, formats, and scope of this manual are described in the following paragraphs:

• Typographical Conventions. This manual uses the following typographical conventions::

Italic Emphasis, books, CDs, file and server names, extensions

Bold User input, IP addresses, GUI screen text

Fixed Command prompt, CLI text, code

italic URL links

• Formats. This manual uses the following formats to highlight special messages:

Note: This format is used to highlight information of importance or special interest.

Warning: Ignoring this type of note may result in a malfunction or damage to the

equipment.

• Scope. This manual is written for the adapter according to these specifications:

Product Version Push 2 TV Adapter (PTV2000)/Intel Wireless Display

Manual Publication Date January 2011

v1.0, January 2011

ix

Push 2 TV Adapter (PTV2000)/Intel Wireless Display User Manual

For more information about network, Internet, firewall, and VPN technologies, see the links to the
NETGEAR website in Appendix B, “Related Documents.”

Note: Product updates are available on the NETGEAR, Inc. website at

http://kbserver.netgear.com/products/PTV2000.asp.

Revision History

Part Number

202-10591-01 1.0 October

Version
Number

Date Description

2010

Original publication

x

v1.0, January 2011

Chapter 1

Connecting

Intel Wireless Display allows consumers to use their HDTV as a huge, remote screen for their
laptop. With Intel Wireless Display, consumers can connect their laptop to their TV and enjoy and
share their personal media collections, latest YouTube videos, downloaded or streamed movies,
music, or a variety of other Internet content from the comfort of their couch.

Intel Wireless Display requires the following key elements:

• Push 2 TV adapter. The adapter receives Wi-Fi signals from the laptop, translates the signals

into an image, and sends the image to the TV.

• A laptop computer with Intel Wireless Display installed. This will be used to manage the

connection to the TV through the adapter.

Using Intel Wireless Display

This section provides instructions for using Intel Wireless Display. For help with installation, see
the Push 2 TV Adapter (PTV2000)/Intel® Wireless Display Installation Guide.

Follow these steps to set up and use Intel Wireless Display. The side-by-side laptop and TV images
shown below correspond to each step and occur at the same time. When a laptop or TV screenshot
is the same for multiple steps, the image is left blank.

Step 1: Opening Intel Wireless Display on the Laptop

To open Intel Wireless Display, click the Windows Start icon on the laptop’s taskbar. Type Intel
Wireless Display into the search field. In the search results click Intel Wireless Display. If an

auto-connect adapter is set, launching the application this way will invoke a connection attempt, if
the adapter is discovered. See “What is Auto-Connect” on page 2-13 for more details on auto­connect.

1-1

v1.0, January 2011

Push 2 TV Adapter (PTV2000)/Intel Wireless Display User Manual

Some laptops may have a button or key that starts Intel Wireless Display. This key will be located
in different places depending on the brand of laptop. It is usually found on or around the keyboard.
The key will contain a small version of the symbol below.

Figure 1-1

If this is the initial set up continue to Step 2. If this is the not the initial set up, it is not necessary to
repeat Steps 2 and 3. Proceed to Step 4.

Step 2: Windows Firewall Security Alert

In the initial set up, a firewall may block Intel Wireless Display and a firewall alert message may
be displayed. If this happens, make sure to allow access for both private and public networks. For
firewall help, see “Firewall Issues” on page 2-6 or see your firewall’s user manual.

Step 3: Consenting to the License Agreement

After reading and agreeing to the license agreement, click the I agree to the terms of this license
button and proceed to the next screen. If you do not agree to the terms of the license, click the I do
not agree button. You will not be able to continue and the application will close.

At this point, the TV status reads Ready for connection.

1-2

v1.0, January 2011