Netgear XS505M User manual

Installation

5-Port or 8-Port 10-Gigabit/Multi-Gigabit

Step 1. Connect the equipment.

Connect an Ethernet port or the SFP port on the switch to your router. Connect the other ports on the switch to network devices.

Sample connections

Internet

Network router

Step 3. Check the status.

Ethernet Unmanaged Switch With 1 SFP+ Port

Universal Pro Series XS505M and XS508M

Package Contents

• Switch (XS505M or XS508M)

• Power cable (localized to the country of sale)

• Rack-mount kit for rack installation

• Rubber feet

• Installation guide

10G link to 10 G NAS

1G link to computer

2.5G link to 2.5 G gaming computer

XS508M switch

MS510T XPP s wi tc h

2.5G PoE link to WAC740 AP

Step 2. Connect to power.

10G ﬁber link to switch

10G link to 10G computer with a Thunderbolt port

Power LED Ethernet port LEDs for ports 1–4 (XS505M) and 1–7 (XS508M)

Fan LED

Note: On model XS508M, port 8 is a combo port that lets you establish a 1G or 10G

connection on either the Ethernet RJ-45 port (marked 8) or the SFP+ port (marked 8F). You cannot use both ports (8 and 8F) simultaneously.

O

Check fan

Normal

10G link (both port LEDs on). Both port LEDs blinking

indicates trac activity.

5G link (le port LED o, right port LED on). Right port

LED blinking indicates trac activity.

2.5G link (le port LED on, right port LED o). Le port LED blinking indicates trac activity.

1G or 100M link (both port LEDs on). Both port LEDs

blinking indicates trac activity.

No link (both port LEDs o).

SFP port LEDs (round) Or, for port 8 (XS508M), Ethernet port LEDs (rectangular)

10G link (both port LEDs on). Both port LEDs blinking indicates trac activity.

1G link (both port LEDs on). Both port LEDs blinking indicates trac activity.

No link (both port LEDs o).

Cables and Speeds

The following table describes the network cables that you can use for the switch connections and the speeds that these cables can support, up to 100 meters (328 feet).

Speed Cable Type

100 Mbps Category 5 (Cat 5) of higher rated

1 Gbps, 2.5 Gbps, or 5 Gbps Category 5e (Cat 5e) or higher rated

10 Gbps Category 6A (Cat 6A) or higher rated.

Note: For speeds of 10 Gbps, if the cable length is shorter than 55 meters

(180 feet), you can use a Category 6 (Cat 6) cable.

SFP Transceiver Modules

SFP+ ﬁber ports accommodate standard small form-factor pluggable (SFP) gigabit interface converters (GBICs, also referred to as transceiver modules) for ﬁber connectivity. GBICs are sold separately from the switch.

The following table describes the NETGEAR SFP transceiver modules and direct attach cables (DACs) that the switch supports.

Speed and Medium Model Description

1G Ethernet short-reach ﬁber AGM731F SFP transceiver 1000BASE-SX

1G Ethernet long-reach ﬁber AGM732F SFP transceiver 1000BASE-LX

1G Ethernet copper AGM734 SFP transceiver 1000BASE-T

10G Ethernet short-reach ﬁber AXM761 SFP+ transceiver 10GBASE-SR

10G Ethernet long-reach ﬁber AXM762 SFP+ transceiver 10GBASE-LR

10G Ethernet long-range multimode ﬁber AXM763 SFP+ transceiver 10GBASE-LRM

Speed and Medium Model Description

10G Ethernet AXC761 SFP+ DAC, 1 meter

10G Ethernet AXC763 SFP+ DAC, 3 meters

Speciﬁcations

Speciﬁcation Description

Network interfaces Model XS505M:

•Four 10G/Multi-Gigabit Ethernet RJ-45 ports that support 100M, 1G, 2.5G, 5G, and 10G

•One SFP+ port that supports 1G and 10G

Model XS508M:

•Seven 10G/Multi-Gigabit Ethernet RJ-45 ports that support 100M, 1G, 2.5G, 5G, and 10G

• One combo port that allows you to use either one of the following ports (you cannot use both ports simultaneously):

- Port 8, which is an Ethernet RJ-45 port that supports 1G and 10G

- Port 8F, which is an SFP+ port that supports 1G and 10G

Power consumption Model XS505M: 25W

Model XS508M: 40W

Dimensions (W x D x H) 12.91 x 6.65 x 1.7 in. (328 x 169 x 43.2 mm)

Weight Model XS505M: 3.0 lb (1.38 kg)

Model XS508M: 3.3 lb (1.49 kg)

Operating temperature 32–122°F (0–50°C)

Operating humidity 10%–90% relative humidity, noncondensing.

Support

Thank you for selecting NETGEAR products. You can visit

www.netgear.com/support to register your product, get help, access the latest

downloads and user manuals, and join our community. We recommend that you use only ocial NETGEAR support resources.

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à http://downloadcenter.netgear.com/other/. (If this product is sold in Canada, you can access this document in Canadian French at http://downloadcenter.netgear.com/other/.)

NETGEAR INT LTD Building 3 University Technology Centre Curraheen Road Cork Ireland

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

August 2017