NETGEAR XETB10GM-100NAS User Manual
XET1001 Wall-Plugged
Ethernet Adapter User
Guide
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
202-10376-01
January 2008
© 2008 by NETGEAR, Inc. All rights reserved..
Technical Support
Please refer to the support information card that shipped with your product. By registering your product at
http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product
and software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: support@netgear.com
North American NETGEAR website: http://www.netgear.com
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.
Microsoft, Windows, Windows NT and Vista are registered trademarks of Microsoft Corporation.Other brand and
product names are registered trademarks or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice. NETGEAR does not assume any liability that
may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruct ions, may cause harmf ul interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
EU Compliance
NETGEAR's XET1001 85 Mbps Wall-Plugged Ethernet Adapter is compliant with the following EU Council
Directives: 89/336/EEC and LVD 73/23/EEC. Compliance is verified by testing to the following standards: EN55022
Class A, EN55024 and EN60950-1.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß das XET1001 85 Mbps Wall-Plugged Ethernet Adapter gemäß der im BMPT-AmtsblVfg
243/1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte
ii
v1.0, January 2008
(z.B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der
Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
Certificate of the Manufacturer/Importer
It is hereby certified that the XET1001 85 Mbps Wall-Plugged Ethernet Adapter has been suppressed in accordance with
the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for
example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please
refer to the notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
has been granted the right to test the series for compliance with the regulations.
and
Product and Publication Details
Model Number: XET1001
Publication Date: January 2008
Product Family: PowerLine Adapter
Product Name: XET1001 85 Mbps Wall-Plugged Ethernet Adapter
Home or Business Product: Home
Language: English
Publication Part Number: 202-10376-01
Publication Version Number: 1.0
v1.0, January 2008
iii
iv
v1.0, January 2008
Contents
XET1001 Wall-Plugged Ethernet Adapter User Guide
About This Manual .............................................................................................................1
Conventions, Formats, and Scope ..............................................................................1
How to Print This Manual ............................................................................................2
Package Contents .............................................................................................................3
Label Information and Status Lights ..................................................................................3
The Label on the Rear Panel ......................................................................................3
Front Panel Status Lights ............................................................................................4
How the PowerLine Adapter Fits in Your Network .................................. ...........................5
Prepare to Install Your PowerLine Adapter ............................ .... ... ... ... .... ... ... ... ... .... ... ... ... ..5
Connect an XET1001 to the Router ..................................................................................6
Connect other Ethernet PowerLine Adapters ............................................................... ... ..8
Install the XET1001 PowerLine Encryption Utility
(Highly Recommended) .....................................................................................................8
Set Your Network Password ......................... ................................................................... 12
Add a Device to an Existing PowerLine Network ............................................................14
Adding a New Device from a Locally Connected Computer .....................................14
Adding a New Device from a Remotely Connected Computer .............................. ...14
Troubleshooting ............................................... ................................................................ 15
NETGEAR Product Registration, Support, and Documentation ...............................15
Basic Functioning ......................................................................................................15
Technical Specifications ...................................................................................................17
Default Configuration Settings ..................................................................................17
Technical Specifications ............................................................................................17
v1.0, January 2008
v
vi
v1.0, January 2008
About This Manual
The XET1001 Wall-Plugged Ethernet Adapter User Guide describes how to install, configure, and
troubleshoot the NETGEAR
manual is intended for readers with intermediate computer and Internet skills. For information
about product features, see the NETGEAR website at http://www.netgear.com.
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following sections.
• Typographical conventions. This manual uses the following typographical conventions.
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
• Formats. This manual uses the following formats to highlight special messages.
®
XET1001 Wall-Plugged Ethernet Adapter. The information in this
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
v1.0, January 2008
1
XET1001 Wall-Plugged Ethernet Adapter User Guide
• Scope. This manual is written for the XET1001 Wall-Plugged Ethernet Adapter according to
these specifications.
Product version XET1001 85 Mbps Wall-Plugged Ethernet Adapter
Manual publication date January 2008
Product updates are available on the NETGEAR website at http://www.netgear.com/support.
How to Print This Manual
To print this manual, you can choose one of the following options, according to your needs. Your
computer must have the free Adobe Acrobat Reader installed in order to view and print PDF files.
The Acrobat Reader is available on the Adobe website at http://www.adobe.com.
• Printing a chapter. Use the PDF of This Chapter link at the top left of any page.
– Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
– Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer toner by selecting this feature.
• Printing the full manual. Use the Complete PDF Manual link at the top left of any page.
– Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
– Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer toner by selecting this feature.
2
v1.0, January 2008
Loading...