NETGEAR XAVB5602-100NAS User Manual

Powerline 500 Nano PassThru (2-pack)
XAVB5602 Installation Guide

© 2012 NETGEAR, Inc. All rights reserved.

No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form or by
any means without the written permission of NETGEAR, Inc.

DO NOT stack equipment, or place equipment in tight spaces or in drawers.
Be sure your equipment is surrounded by at least 2 in. of air space.

For indoor use only in EU countries and Switzerland.

Technical Support

Thank you for choosing NETGEAR. To register your product, get the latest
product updates, or get support online, visit us at http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries):

See http://support.netgear.com/app/answers/detail/a_id/984.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks
and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the
United States and/or other countries. Information is subject to change without
notice. Other brand and product names are registered trademarks or
trademarks of their respective holders. © 2012 NETGEAR, Inc. All rights
reserved.

Statement of Conditions

In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume any
liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.

Package Contents

Ethernet cables (2)

Powerline adapters (2)

Products sold in some locations include a Resource CD.

Your Powerline adapter may look like one of these:

France

Germany/Europe

3

Switzerland

Hardware Features

Filtered
AC socket

Power
LED

Powerline
LED

Ethernet
LED

Compatible Powerline and HomePlug AV certified devices include the
NETGEAR XAV101, XAV1501, XAV1004, XAV2001, XAV2501,
XAV2602 XAVN2001, XAV5001, XAV5004, and XAV5501. For a
complete list of HomePlug AV certified devices, go to

www.homeplug.org/certified_products.

Factory
Reset
button

Security button

4

LEDs

The LEDS indicate the status of your Powerline adapters.

• When you plug in the adapter, the Power LED lights up and

turns green.

• The adapter is not active when no Ethernet link has occurred for

more than 10 minutes. The adapter enters power saving mode,
and the Power LED turns amber.

• The Ethernet LED lights up when you connect a powered-on

Ethernet device to at least one Ethernet port.

• The Powerline LED turns on when the adapter detects at least

one other compatible Powerline device.

The Pick A Plug diagnostic feature lets you pick the electrical
outlet with the strongest throughput, indicated by the color
displayed by the Powerline LED:

- Green: Link rate > 80 Mbps (Best)

- Amber: Link rate > 50 and < 80 Mbps (Better)

- Red: Link rate < 50 Mbps (Good)

5

Install Your Powerline Adapters

6

The filtered AC
socket removes
some electrical
noise. Plugging
a nearby device
into the filtered
AC socket
improves
performance.

You can plug a
power strip into
the filtered outlet,
but do not plug
your Powerline
adapter into a
power strip.

7

Secure Your Powerline Network

A Powerline network forms when at least two compatible Powerline
devices communicate. After the Powerline network is up and running,
you can use the Security buttons on the adapters to add encryption to
your Powerline network.

CAUTION: Do not press the Security button until each adapter has

powered up and its Power LED is solid green. Pressing this
button too soon can temporarily disable Powerline
communication. If this occurs, use the Factory Reset button
to return the Powerline adapter to its factory settings.

To secure your Powerline network:

1. Make sure the Power LED is solid green. If it is amber, connect

a device to one of the Ethernet ports so the adapter exits power
saving mode.

2. On the first Powerline adapter, press its Security button for 2

seconds. The Power LED blinks green while you are setting up
security.

3. Within 2 minutes, go to the next Powerline adapter and press its

Security button for 2 seconds.

After security is set, the Power LED turns solid green. The
adapters can communicate over the network. The Powerline
LEDs are blinking or solid.

8

Technical Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of
your product and use it to register your product at

http://www.netgear.com/register. Registration is required before you

can use the telephone support service. Registration through the
NETGEAR website is strongly recommended.

Go to http://support.netgear.com for product updates and web
support.

For additional information about setting up, configuring, and using
your Powerline 500 Nano Adapter, see the User Manual.

For complete DoC, visit the NETGEAR EU Declarations of
Conformity website at

http://support.netgear.com/app/answers/detail/a_id/11621/.

For GNU General Public License (GPL) related information, visit

http://support.netgear.com/app/answers/detail/a_id/2649.

9

Safety Information

• For national approvals (approval schemes other than CB),

relevant national standards for plug, socket-outlet, and direct
plug-in units (for example, US) shall also be consulted while
testing and approving such products according to national
standards.

• AC input rating (NA): 100–125V, 0.2A (Max); 50–60Hz excluding

socket outlet rating.

• AC input rating (AU, UK, FR, EU): 200–250V, 0.2A (Max),

50–60Hz excluding socket outlet rating.

• XAV5602 ratings (maximum load): EU: 16A 250V~,

UK: 13A 250V~, FR: 16A, 250V~, NA: 15A 125V~,
AU: 10A, 250V~.

• Operating temperature: 0° C~40° C.

• Check the electrical current for any device plugged into the

filtered AC socket. Do not exceed home and product outlet
ratings and electrical requirements.

• The socket-outlet shall be installed near the equipment and be

easily accessible.

• Only power cords are allowed to be inserted into the filtered AC

outlet; no other equipment with a direct plug-in is allowed. Power

10

cord needs to be a maximum of 1 m long and a minimum of 0.75
mm square of cross-sectional area.

• Do not plug devices into the XAV5602 filtered AC outlet that

exceed the product ratings. The output voltage of the filtered AC
outlet is the same as the power outlet that the XAV5602 is
plugged into. To help avoid damaging your system, be sure that
the attached devices are electrically rated to operate with the
power available in your location.

• If the input AC voltage is less than 100 Vac, the device plugged

into the filtered AC socket of the XAV5602 might not perform as
well as expected.

• DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC

socket or into an attached powerstrip. The device is not intended
to be used with home appliances such as air conditioners, power
tools, space heaters, fans, hair dryers, ovens, or refrigerators.

Compliance

This symbol was placed in accordance with the European Union Directive 2002/
96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If
disposed of within the European Union, this product should be treated and
recycled in accordance with the laws of your jurisdiction implementing the WEEE
Directive.

11

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

May 2012