Orbi WiFi 6E Router Model RBRE960
Orbi WiFi 6E Satellite Model RBSE960
Orbi WiFi 6E Router Model RBRE950
Orbi WiFi 6E Satellite Model RBSE950
NETGEAR, Inc.
350 E. Plumeria DriveJanuary 2023
San Jose, CA 95134, USA202-12608-04
Page 2
Orbi Quad-Band Mesh WiFi 6E System
Support and Community
Visit netgear.com/support
to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com
.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/
.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/
.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/
.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy
.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions
. If you do not agree, return the
device to your place of purchase within your return period.
Do not use this device outdoors.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz
devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that
operation of this device is permitted in large aircraft while flying above 10,000 feet.
Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or
communications with unmanned aircraft systems.
Troubleshoot your network using the ping utility........................142
Test the LAN path to your router...............................................142
Test the path from your computer to a remote device...........143
Appendix A Factory Settings and Technical Specifications
Factory settings for Orbi routers....................................................146
Factory settings for Orbi router model RBRE960....................146
Factory settings for Orbi router model RBRE950....................148
Factory settings for Orbi satellites..................................................150
Factory settings for Orbi satellite model RBSE960.................150
Factory settings for Orbi satellite model RBSE950.................152
Technical specifications for Orbi routers......................................154
Technical specifications for Orbi router model RBRE960......154
Technical specifications for Orbi router model RBRE950......155
Technical specifications for Orbi satellites....................................157
Technical specifications for Orbi satellite model RBSE960....157
Technical specifications for Orbi satellite model RBSE950....159
7
Page 8
1
Overview
The Orbi Quad-Band Mesh WiFi 6E System creates dedicated high-speed WiFi
connections to your Internet service. The Orbi router (model RBRE960 or model
RBRE950) connects to your modem or gateway. The Orbi satellite (model RBSE960 or
model RBSE950) extends the WiFi signal throughout your home.
This manual describes how to manage your Orbi Quad-Band Mesh WiFi 6E System from
your Orbi router web interface. You can manage your Orbi satellite from the Orbi router
web interface.
This chapter contains the following sections:
•What
•Orbi router overview
•Orbi satellite overview
•Router and satellite labels
•Connect your router
•Place your Orbi satellite
•Sync your Orbi satellite with your Orbi router
•Set up your satellite with a wired connection to your router
For more information about the topics covered in this manual, visit the support website
at https://www.netgear.com/support/
Note: This manual might refer to the Orbi router (model RBRE960 or model RBRE950)
as the router and refer to the Orbi satellite (model RBSE960 or model RBSE950) as the
satellite.
is WiFi 6E?
.
8
Page 9
Orbi Quad-Band Mesh WiFi 6E System
What is WiFi 6E?
WiFi 6E builds on the existing WiFi 6 (802.11ax) standard. WiFi 6E offers all of the
cutting-edge features of WiFi 6 and allows access to a new 6 GHz wireless band. This
combination of WiFi 6 technology and access to a brand new, empty WiFi band exclusive
to WiFi 6E devices makes WiFi 6E one of the most important developments in wireless
technology.
More high-bandwidth channels: WiFi 6E expands on the spectrum and bandwidth
•
improvements of WiFi 6 with the addition of a 6 GHz band. This wireless band is
much wider than the 2.4 GHz and 5 GHz bands and can support up to fourteen
80 MHz channels or seven 160 MHz channels. This means more capacity for
high-bandwidth activities like 4k and 8k gaming, virtual reality applications, and
video conferencing.
Less interference and network congestion: The 6 GHz wireless band is newly
•
certified and is exclusive to devices that support WiFi 6E. This means that on 6 GHz,
the WiFi network does not need to slow down to accommodate legacy devices.
Fewer devices, more spectrum, and more bandwidth means less interference and
network congestion. WiFi 6E devices can support the most bandwidth-heavy,
low-latency applications without competing for bandwidth.
Improved security: Wi-Fi Protected Access (WPA) 3 is mandatory for all Wi-Fi 6
•
Certified devices operating in 6 GHz. WPA3 is the latest Wi-Fi Alliance security
certification. WPA3 provides the latest in security and authentication protocols. As
a result, 6 GHz WiFi traffic is more secure than ever and 6 GHz networks are more
difficult to hack.
To make use of the 6 GHz band, the router and its WiFi clients must support 802.11ax.
Note: The router can let devices that support 802.11ax connect to its 6 GHz radio.
Devices that do not support 802.11ax cannot connect to the 6 GHz radio but can connect
to the 2.4 GHz radio or 5 GHz radio.
Orbi router overview
The following sections are an overview of the Orbi router hardware features and LED
behavior. These sections apply to both model RBR960 and model RBR950.
User Manual9Overview
Page 10
Orbi Quad-Band Mesh WiFi 6E System
Orbi router hardware features
The following figures shows the Orbi router hardware features.
Figure 1. Orbi router front and back views
1. Router LED: Use the LED on the front of the router to determine its status. For more
information about the LED behavior, see Orbi
2. Sync button: Use the Sync button to connect a satellite to the router. For more
information, see Sync
3. 10G Internet port: Connect your modem to this port and get up to 10 Gbps Internet
speeds.
4. 2.5G Ethernet port: This Ethernet port provides a wired connection speed of up to
2.5 Gbps. You can connect this port to the 2.5G Ethernet port on the satellite to
create a wired backhaul connection. For more information, see Set up and sync an
Orbi satellite over a wired connection on page 17.
5. Gigabit Ethernet ports 1–3: You can connect a LAN device to each of the three
Gigabit Ethernet RJ-45 LAN ports.
6. Power connector: Connect the power adapter that came with your router to this
port.
your Orbi satellite with your Orbi router on page 16.
router LED behavior on page 11.
User Manual10Overview
Page 11
Orbi Quad-Band Mesh WiFi 6E System
7. Power LED: For more information about the Power LED behavior, see Orbi router
LED behavior on page 11.
8. Reset button: Use the Reset button to restart (reboot) the router or reset the router
to its factory default settings:
Restart the router: Press the Reset button for less than five seconds. The Power
•
LED lights solid amber and the router restarts.
Reset the router to its factory default settings: Press and hold the Reset button
•
until the Power LED starts blinking amber. The router resets and returns to its
factory settings. For information about the factory settings, see Factory
settings
for Orbi routers on page 146.
Orbi router LED behavior
The Orbi router has an LED on the front and a Power LED on the back.
The following table describes the LED behavior for the router's Power LED.
Table 1. Power LED behavior
DescriptionLED color
Power is on.Solid green
The router is restarting.Solid amber
Blinking amber
The router's firmware is resetting to its factory
default settings.
The router's firmware is corrupted.Blinking red
Power is not supplied to the routerOff
The following table describes the LED behavior for the router LED located on the front
of the router.
Table 2. Router LED behavior
Pulsing white
Solid white
DescriptionLED color
The router is powering up or the Sync button
was pressed.
The router is resetting to its factory default
settings.
User Manual11Overview
Page 12
Orbi Quad-Band Mesh WiFi 6E System
Table 2. Router LED behavior (Continued)
DescriptionLED color
The router is not connected to the Internet.Solid magenta
Off
The router connected to the Internet and is
working normally.
Orbi satellite overview
The following sections are an overview of the Orbi satellite hardware features and LED
behavior. These sections apply to both model RBS960 and model RBS950.
Orbi satellite hardware features
The following figures shows the Orbi satellite hardware features.
Figure 2. Orbi satellite front and back views
1. Satellite LED: Use the LED on the front of the router to determine its status. For
more information about the LED behavior, see Orbi
satellite LED behavior on page
13.
2. Sync button: Use the Sync button to connect the satellite to the router. For more
User Manual12Overview
Page 13
Orbi Quad-Band Mesh WiFi 6E System
information, see Sync your Orbi satellite with your Orbi router on page 16.
3. 2.5G Ethernet port: This Ethernet port provides a wired connection speed of up to
2.5 Gbps. You can connect this port to the 2.5G Ethernet port on the router to create
a wired backhaul connection. For more information, see Set
up and sync an Orbi
satellite over a wired connection on page 17.
4. Gigabit Ethernet ports 1–3: You can connect a LAN device to each of the three
Gigabit Ethernet RJ-45 LAN ports.
5. Power connector: Connect the power adapter that came with your satellite to this
port.
6. Power LED: For more information about the Power LED behavior, see Orbi router
LED behavior on page 11.
7. Reset button: Use the Reset button to restart (reboot) the satellite or reset the
satellite to its factory default settings:
Restart the satellite: Press the Reset button for less than five seconds. The Power
•
LED lights solid amber and the satellite restarts.
Reset the satellite to its factory default settings: Press and hold the Reset
•
button until the Power LED starts blinking amber. The satellite resets and returns
to its factory settings. For information about the factory settings, see Factory
settings for Orbi routers on page 146.
Orbi satellite LED behavior
The Orbi satellite has an LED on the front and a Power LED on the back.
The following table describes the LED behavior for the satellite's Power LED.
Table 3. Power LED behavior
DescriptionLED color
Power is on.Solid green
The satellite is restarting.Solid amber
The satellite's firmware is resetting to its factory default settings.Blinking amber
The satellite's firmware is corrupted.Blinking red
Power is not supplied to the satelliteOff
The following table describes the LED behavior for the satellite LED located on the front
of the satellite.
User Manual13Overview
Page 14
Table 4. Satellite LED behavior
Orbi Quad-Band Mesh WiFi 6E System
DescriptionLED color
The satellite is powering up.Pulsing white
Solid blue
Solid amber
The satellite connected to the router and the connection is good.
The LED lights blue for three minutes and then turns off.
The satellite connected to the router and the connection is fair.
The LED lights amber for three minutes and then turns off.
The satellite failed to sync with the router.Solid magenta
The satellite synced with the router and is working normally.Off
Router and satellite labels
The Orbi router and satellite labels show the router’s or satellite's MAC address and
serial number. The label also includes a QR code you can scan during setup to connect
to the Orbi setup network. The labels are located on the bottom of the router and
satellite. Following is an example of what the router or satellite label might look like:
User Manual14Overview
Page 15
Orbi Quad-Band Mesh WiFi 6E System
Connect your router
Note: If both your Internet service provider (ISP) and modem support a speed of
10 Gbps, the router’s Internet connection also functions at 10 Gbps. Otherwise, the
Internet connection functions at the maximum speed that either your ISP or your modem
supports. (1 Gbps is a common speed.)
Power on your router and connect it to a modem.
To connect your router to a modem:
1.
Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2. Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3.
Connect your modem to the Internet port of your router with the Ethernet cable that
came with your router.
Note: If both your ISP and modem support a speed that is higher than 1 Gbps (for
example, 2.5 Gbps, 5 Gbps, or 10 Gbps), we recommend that you use the Category
(Cat) 6 Ethernet cable that came in the box. A Cat 6 Ethernet cable is better suited
to higher speeds. If your ISP or modem supports a speed of 1 Gbps, you can use a
Cat 5E Ethernet cable.
4.
(Optional) If your package comes with plug adapters for the power adapter, connect
the plug adapter for your region to the power adapter.
User Manual15Overview
Page 16
Orbi Quad-Band Mesh WiFi 6E System
Note: For Singapore, use the 2-pin EU plug adapter or the 3-pin UK plug adapter
only. Do not use the snap pin on the power adapter.
5. Connect the power adapter to your router and plug the power adapter into an outlet.
6.
If the Power LED does not light, make sure that the power adapter is properly
connected to your router and power outlet.
Place your Orbi satellite
Your Orbi satellite must be within range of your Orbi router’s WiFi signal for it to sync
with your router. Use your satellite's LED to help you determine where to place your
satellite. For more information about the satellite LED colors and behaviors, see Orbi
satellite LED behavior on page 13.
Sync your Orbi satellite with your Orbi router
The Orbi satellite that comes with your Orbi router is preset to automatically find and
sync to your Orbi router's WiFi signal.
To sync your satellite:
1. Place your satellite.
For more information, see Place
2. Connect the satellite to a power source.
The satellite LED pulses white. The satellite automatically finds the Orbi router’s WiFi
signal and attempts to sync to the Orbi router.
The satellite LED lights one of the following colors:
Blue. The Orbi router and satellite successfully synced, and the connection
•
between the router and satellite is good.
Amber. The connection with the router is fair. We recommend that you move
•
the Orbi satellite closer to the Orbi router and try again.
your Orbi satellite on page 16.
3.
If the satellite LED lights magenta, do the following:
a. Unplug your Orbi satellite, move the satellite closer to the router.
b.
Plug the satellite back in and wait two minutes for the LED to turn blue or amber.
User Manual16Overview
Page 17
Orbi Quad-Band Mesh WiFi 6E System
4.
If the satellite LED still does not turn blue or amber, do the following:
a.
Press the Sync button on the back of the router.
b.
Within two minutes, press the Sync button on the back of the satellite.
c.
Wait two minutes for the LED to turn blue or amber.
Set up your satellite with a wired connection
to your router
Instead of using a WiFi backhaul connection between the router and the satellite, you
can use a wired connection.
Set up and sync an Orbi satellite over a wired connection
Your Orbi satellite automatically connects wirelessly to your Orbi router to create a
wireless backhaul. Your satellite and router also support Ethernet backhaul, which means
that you can use an Ethernet cable to connect your satellite to your router.
If your home has built-in Ethernet outlets in the rooms and the cables lead into the same
physical network, you can also connect both your Orbi router and Orbi satellite to the
Ethernet outlets and let them sync.
To set up and sync your Orbi satellite over a wired connection:
1. Place your satellite in the room where you want WiFi service.
2. Connect an Ethernet cable to the 2.5G Ethernet port on the satellite.
You can also use a Gigabit Ethernet port on the satellite, but the 2.5G Ethernet port
is much faster.
Note: For a 2.5 Gbps connection, we recommend that you use a Category (Cat) 6
Ethernet cable. For a Gigabit Ethernet connection, you can use a Cat 5E Ethernet
cable.
3.
Connect the other end of the Ethernet cable to the 2.5G Ethernet port on the router.
User Manual17Overview
Page 18
Orbi Quad-Band Mesh WiFi 6E System
You can also use a Gigabit Ethernet port on the router, but the 2.5G Ethernet port
is much faster.
4. Connect the satellite to a power source.
The Power LED on the back of the satellite lights green.
The satellite bar LED pulses white. The satellite automatically syncs to the Orbi router.
Note: The first time that you sync the satellite and the router, the sync process can
take between five and ten minutes because the router might automatically update
the satellite’s firmware.
After the sync process is complete, the satellite bar LED lights blue for about three
minutes and then turns off. Blue indicates that the router and satellite successfully
synced, and the wired connection between the router and satellite is good.
Ethernet backhaul connections for multiple satellites
Your Orbi satellite automatically connects over WiFi to your Orbi router or another Orbi
satellite to create a WiFi backhaul connection, or you can use an Ethernet cable to
connect your satellite to your router or another satellite to create a wired backhaul
connection.
Note: The products shown in the following diagrams do not represent any particular
Orbi models, but the topologies and setups in the diagrams do apply to your models.
User Manual18Overview
Page 19
Internet
Router
Modem
Satellite 1Satellite 2
Internet
Router
Modem
Satellite 1Satellite 2
Switch
Internet
Router
Modem
Satellite 1Satellite 2
Orbi Quad-Band Mesh WiFi 6E System
The following figure shows how to connect your Orbi satellites to your Orbi router using
a star topology to create an Ethernet backhaul connection.
Figure 3. Star topology: Satellites connected to the router’s Ethernet ports
The following figure shows another way to connect your Orbi satellites to your Orbi
router using a daisy chain topology to create an Ethernet backhaul connection.
Figure 4. Daisy chain topology: Satellite 1 connected to router and satellite 2 connected to satellite 1
The following figure shows how to connect your Orbi satellites to your Orbi router
through an Ethernet switch.
Figure 5. Ethernet backhaul connection using a switch
User Manual19Overview
Page 20
2
Connect to the Network and Access
the Router
This chapter contains the following sections:
•Connect
•Types of logins
•Set up and manage with the NETGEAR Orbi app
•Use a web browser to access the router
•Change the language
to the network
20
Page 21
Orbi Quad-Band Mesh WiFi 6E System
Connect to the network
You can connect to the Orbi network through a wired or WiFi connection. If you set up
your computer to use a static IP address, change the settings so that it uses Dynamic
Host Configuration Protocol (DHCP).
Wired connection
You can connect your computer to the router using an Ethernet cable and join the
router’s local area network (LAN). The computer must have an Ethernet port.
To connect your computer to the router with an Ethernet cable:
1. Make sure that the router is receiving power (its Power LED is lit).
2. Connect an Ethernet cable to an Ethernet port on your computer.
3.
Connect the other end of the Ethernet cable to one of the router’s Ethernet ports.
Your computer connects to the local area network (LAN). A message might display
on your computer screen to notify you that an Ethernet cable is connected.
WiFi connection
If you're installing your Orbi router for the first time, you can connect to the router's
WiFi network by scanning the QR code on your router with the camera app on your
mobile device. To scan the QR code with your camera app, your mobile device must
have iOS version 11 or later or Android version 10 or later.
You can also manually find and select the Orbi router's WiFi network from your
WiFi-enabled computer or mobile device.
To find and select the WiFi network:
1. Make sure that the router or satellite is receiving power (its Power LED is lit).
2.
On your WiFi-enabled computer or mobile device, find and select the WiFi network.
The WiFi network name is on the router label. The WiFi network name is the same
for the router and the satellite in the Orbi WiFi System.
Note: If you bought the router and the satellite separately, their default WiFi network
names are different.
3. Join the WiFi network and enter the WiFi password.
The password is on the router label.
Your WiFi-enabled computer or mobile device connects to the WiFi network.
Access the Router
User Manual21Connect to the Network and
Page 22
Orbi Quad-Band Mesh WiFi 6E System
WiFi connection using WPS
You can connect to the router’s WiFi network with Wi-Fi Protected Setup (WPS) or you
can find and select the WiFi network.
To use WPS to connect to the WiFi network:
1. Make sure that the router is receiving power (its Power LED is lit).
2.
Check the WPS instructions for your computer or WiFi device.
3. Press the Sync button on the router.
4. Within two minutes, on your WiFi-enabled computer or mobile device, press its WPS
button or follow its instructions for WPS connections.
Your computer or mobile device connects to the WiFi network.
Types of logins
Separate types of logins serve different purposes. It is important that you understand
the difference so that you know which login to use when.
Types of logins:
ISP login. The login that your Internet service provider (ISP) gave you logs you in to
•
your Internet service. Your service provider gave you this login information in a letter
or some other way. If you cannot find this login information, contact your service
provider.
WiFi network name and network key. Your router and satellite are preset with the
•
same WiFi network name (SSID) and network key (password) for WiFi access. This
information is on the router label and the satellite label.
NETGEAR account login. The free NETGEAR account that you need to register your
•
router and manage your subscriptions. If you do not have a NETGEAR account, you
can create one using the NETGEAR Orbi app.
Router login. This logs you in to the router web interface from a web browser as
•
admin.
Access the Router
User Manual22Connect to the Network and
Page 23
Orbi Quad-Band Mesh WiFi 6E System
Set up and manage with the NETGEAR Orbi
app
You can use the NETGEAR Orbi app to set up and access your Orbi network.
To find the app, scan a QR code or search for NETGEAR Orbi in the Apple App Store
or Google Play Store.
For more information about the Orbi app, visit
https://www.netgear.com/home/apps-services/orbi-app
.
Note: If you do not want to use the NETGEAR Orbi app, you can use the Orbi router
web interface to set up your Orbi devices. For more information about how to access
your Orbi router web interface, see Use
23.
To set up your Orbi WiFi system with the Orbi app:
1. Download the NETGEAR Orbi app on your mobile device.
2. On your mobile device, open the WiFi connection manager.
3. Locate and connect your mobile device to your Orbi WiFi network.
Your preset Orbi WiFi network and password displays on the Orbi router label. You
can change the WiFi credentials after the setup.
4.
Launch the Orbi app and follow the setup instructions.
a web browser to access the router on page
Use a web browser to access the router
When you connect to the network (either with WiFi or with an Ethernet cable), you can
use a web browser to access the router to view or change its settings. The first time you
access the router, the NETGEAR installation assistant automatically checks to see if your
router can connect to your Internet service.
Access the Router
User Manual23Connect to the Network and
Page 24
Orbi Quad-Band Mesh WiFi 6E System
Use the automatic Internet setup option
You can set up your router automatically, or you can use a web browser to access the
router and set up your router manually. Before you start the setup process, get your ISP
information and make sure that the computers and devices in the network use the
settings described here.
When your Internet service starts, your Internet service provider (ISP) typically gives you
all the information needed to connect to the Internet. For DSL service, you might need
the following information to set up your router:
The ISP configuration information for your DSL account
•
ISP login name and password
•
Fixed or static IP address settings (special deployment by ISP; this setting is rare)
•
If you cannot locate this information, ask your ISP to provide it. When your Internet
connection is working, you no longer need to launch the ISP login program on your
computer to access the Internet. When you start an Internet application, your router
automatically logs you in.
Installation and basic setup takes about 15 minutes to complete.
To automatically set up your router:
1. Power on your router.
2. Make sure that your WiFi-enabled computer or mobile device is connected to the
router with an Ethernet cable (wired) or wirelessly with the preset WiFi security
settings listed on the label.
Note: If you want to change the router’s WiFi settings, use a wired connection to
avoid being disconnected when the new WiFi settings take effect.
3. Launch a web browser.
The page that displays depends on whether you accessed the router before:
The first time that you set up the Internet connection for your router, the browser
•
goes to orbilogin.com, and the Orbi login page displays.
If you already set up the Internet connection, enter orbilogin.com in the address
•
field for your browser to start the installation process.
4. Follow the onscreen instructions.
The router connects to the Internet.
Access the Router
User Manual24Connect to the Network and
Page 25
Orbi Quad-Band Mesh WiFi 6E System
5.
If the browser does not display the web page, do the following:
Make sure that the computer is connected to one of the four LAN Ethernet ports
•
or over WiFi to the router.
Make sure that the router is receiving power, and that its Power LED is lit.
•
Close and reopen the browser or clear the browser cache.
•
Browse to orbilogin.com.
•
If the computer is set to a static or fixed IP address (this setting is uncommon),
•
change it to obtain an IP address automatically from the router.
6.
If the router does not connect to the Internet, do the following:
Review your settings.
•
Make sure that you selected the correct options and typed everything correctly.
•
Contact your ISP to verify that you are using the correct configuration information.
•
See Troubleshooting
•
If problems persist, register your NETGEAR product and contact NETGEAR
technical support.
on page 136.
Log in to the Orbi router web interface
When you log in to the Orbi, the browser displays the router web interface. You can
use the router web interface to change the router or satellite settings.
To log in to your Orbi:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
Access the Router
User Manual25Connect to the Network and
Page 26
Orbi Quad-Band Mesh WiFi 6E System
Change the language
By default, the language is set as Auto.
To change the language:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
In the upper right corner, select a language from the menu.
5.
When prompted, click the OK button to confirm this change.
The page refreshes with the language that you selected.
Access the Router
User Manual26Connect to the Network and
Page 27
3
Specify Your Internet Settings
Usually, the quickest way to set up the router to use your Internet connection is to allow
Orbi to detect the Internet connection when you first access the router with a web
browser. You can also customize or specify your Internet settings.
This chapter contains the following sections:
•Manually set up the Internet connection
•Manage an IPv6 Internet connection
•Change the MTU size
27
Page 28
Orbi Quad-Band Mesh WiFi 6E System
Manually set up the Internet connection
You can view or change the router’s Internet connection settings.
Specify an Internet connection without a login
Note: For information about WAN port aggregation, see Manage
on page 70.
To specify the Internet connection settings:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Internet Setup page.
5. Leave the Does your Internet connection require a login No radio button selected.
6.
If your Internet connection requires an account name or host name, type it in the
Account Name (If Required) field.
the WAN preference
7.
If your Internet connection requires a domain name, type it in the Domain Name (IfRequired) field.
For the other sections in this page, the default settings usually work, but you can
change them.
8. Select an Internet IP Address radio button:
Get Dynamic IP Address From Router. Your ISP uses DHCP to assign your IP
•
address. Your ISP automatically assigns these addresses.
Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
•
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
User Manual28Specify Your Internet Settings
Page 29
Orbi Quad-Band Mesh WiFi 6E System
9. Select a Domain Name Server (DNS) Address radio button:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
•
Your ISP automatically assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select
•
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
10. Select a Router MAC Address radio button:
Use Default Address. Use the default MAC address.
•
Use Computer MAC Address. The router captures and uses the MAC address
•
of the computer that you are now using. You must use the one computer that the
ISP allows.
Use This MAC Address. Enter the MAC address that you want to use.
•
11.
In the Vendor Class Identifier String (option 60) field, enter the enter the vendor
class identifier (VCI) string, as indicated by your ISP.
If your ISP did not provide you with a VCI string, leave this field blank.
12.
In the Client Identifier String (option 61) field, enter the client identifier (client ID)
string, as indicated by your ISP.
If your ISP did not provide you with a client ID string, leave this field blank.
13. Click the Apply button.
Your settings are saved.
14. Click the Test button to test your Internet connection.
Specify an Internet connection that uses a login
Note: For information about WAN port aggregation, see Manage
on page 70.
To view or change the basic Internet setup:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
the WAN preference
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
User Manual29Specify Your Internet Settings
Page 30
Orbi Quad-Band Mesh WiFi 6E System
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Internet Setup page displays.
5. Select the Does your Internet connection require a login Yes radio button.
The page adjusts.
6. From the Internet Service Provider menu, select the encapsulation method:
The selections are PPPoE, PPTP, or L2TP.
7.
In the Login field, enter the login name your ISP gave you.
This login name is often an email address.
8.
In the Password field, type the password that you use to log in to your Internet
service.
9.
If your ISP requires a service name, type it in the Service Name (if Required) field.
10. From the Connection Mode menu, select Always On, Dial on Demand, or ManuallyConnect.
11.
To change the number of minutes until the Internet login time out, in the Idle Timeout(In minutes) field, type the number of minutes.
This is how long the router keeps the Internet connection active when no one on the
network is using the Internet connection. A value of 0 (zero) means never log out.
12. Select an Internet IP Address radio button:
Get Dynamic IP Address From Router. Your ISP uses DHCP to assign your IP
•
address. Your ISP automatically assigns these addresses.
Use Static IP Address. Enter the IP address, IP subnet mask, and gateway IP
•
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
13. Select a Domain Name Server (DNS) radio button:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
•
Your ISP automatically assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select
•
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
User Manual30Specify Your Internet Settings
Page 31
Orbi Quad-Band Mesh WiFi 6E System
14. Select a Router MAC Address radio button:
Use Default Address. Use the default MAC address.
•
Use Computer MAC Address. The router captures and uses the MAC address
•
of the computer that you are now using. You must use the one computer that the
ISP allows.
Use This MAC Address. Enter the MAC address that you want to use.
•
15. Click the Apply button.
Your settings are saved.
16. Click the Test button to test your Internet connection.
Manage an IPv6 Internet connection
The router supports many different types of IPv6 Internet connections for which you can
specify the settings manually.
Requirements for entering IPv6 addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated
by colons. You can reduce any four-digit group of zeros within an IPv6 address to a
single zero or omit it. The following errors invalidate an IPv6 address:
More than eight groups of hexadecimal quartets
•
More than four hexadecimal characters in a quartet
•
More than two colons in a row
•
Specify IPv6 Internet connections
You can set up an IPv6 Internet connection if the router does not detect it automatically.
To set up an IPv6 Internet connection:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. From the Internet Connection Type menu, select the IPv6 connection type:
If you are not sure, select Auto Detect so that the router detects the IPv6 type
•
that is in use.
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select
•
Auto Config.
Your Internet service provider (ISP) can provide this information.
For more information about IPv6 Internet connection, see the following sections:
Use
•
•
•
auto detection for an IPv6 Internet connection on page 32
auto configuration for an IPv6 Internet connection on page 34
Use
Set
up an IPv6 6to4 tunnel Internet connection on page 35
up an IPv6 pass-through Internet connection on page 37
Set
•
up an IPv6 fixed Internet connection on page 37
Set
•
Set
•
•
•
6. Click the Apply button.
Your settings are saved.
up an IPv6 DHCP Internet connection on page 39
up an IPv6 PPPoE Internet connection on page 40
Set
Set
up an IPv6 6rd tunnel Internet connection on page 42
Use auto detection for an IPv6 Internet connection
To set up an IPv6 Internet connection through auto detection:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > IPv6.
User Manual32Specify Your Internet Settings
Page 33
Orbi Quad-Band Mesh WiFi 6E System
The IPv6 page displays.
5. From the Internet Connection Type menu, select Auto Detect.
The page adjusts.
The router automatically detects the information in the following fields:
Connection Type. This field indicates the connection type that is detected.
•
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
•
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
•
for the router’s LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
6. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices, but
•
some IPv6 systems might not support the DHCv6 client function.
Auto Config. This is the default setting.
•
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
7. (Optional) Select the Enable RIPng check box.
This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.
RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.
8.
(Optional) Select the Use This Interface ID check box and specify the interface ID
to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
9. Click the Apply button.
Your settings are saved.
User Manual33Specify Your Internet Settings
Page 34
Orbi Quad-Band Mesh WiFi 6E System
Use auto configuration for an IPv6 Internet connection
To set up an IPv6 Internet connection through auto configuration:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
From the Internet Connection Type menu, select Auto Config.
The page adjusts.
The router automatically detects the information in the following fields:
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
•
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
•
for the router’s LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
6.
(Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name,
enter it here.
7.
(Optional) In the DHCP Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for
the IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this
field. For example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.
User Manual34Specify Your Internet Settings
Page 35
Orbi Quad-Band Mesh WiFi 6E System
8. Select an IPv6 Domain Name Server (DNS) Address radio button:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
•
Your ISP automatically assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select
•
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
9. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices, but
•
some IPv6 systems might not support the DHCv6 client function.
Auto Config. This is the default setting.
•
10. (Optional) Select the Enable RIPng check box.
This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.
RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.
11.
(Optional) Select the Use This Interface ID check box and specify the interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
12. Click the Apply button.
Your settings are saved.
Set up an IPv6 6to4 tunnel Internet connection
The remote relay router is the device to which your router creates a 6to4 tunnel. Make
sure that the IPv4 Internet connection is working before you apply the 6to4 tunnel
settings for the IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. From the Internet Connection Type menu, select 6to4 Tunnel.
The page adjusts.
The router automatically detects the information in the Router’s IPv6 Address on
LAN field. This field shows the IPv6 address that is acquired for the router’s LAN
interface. The number after the slash (/) is the length of the prefix, which is also
indicated by the underline (_) under the IPv6 address. If no address is acquired, the
field displays Not Available.
6. Select a Remote 6to4 Relay Router radio button:
Auto. Your router uses any remote relay router that is available on the Internet.
•
This is the default setting.
Static IP Address. Enter the static IPv4 address of the remote relay router. Your
•
IPv6 ISP usually provides this address.
7. Select an IPv6 Domain Name Server (DNS Address) radio button:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
•
Your ISP automatically assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select
•
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
8. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices, but
•
some IPv6 systems might not support the DHCv6 client function.
Auto Config. This is the default setting.
•
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network.
9. (Optional) Select the Enable RIPng check box.
This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.
RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.
10.
(Optional) Select the Use This Interface ID check box and specify the interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
User Manual36Specify Your Internet Settings
Page 37
Orbi Quad-Band Mesh WiFi 6E System
11. Click the Apply button.
Your settings are saved.
Set up an IPv6 pass-through Internet connection
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN
and WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header
packets.
To set up a pass-through IPv6 Internet connection:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. From the Internet Connection Type menu, select Fixed.
The page adjusts.
6.
Configure the fixed IPv6 addresses for the WAN connection:
IPv6 Address/Prefix Length. The IPv6 address and prefix length of the router
•
WAN interface.
Default IPv6 Gateway. The IPv6 address of the default IPv6 gateway for the
•
router’s WAN interface.
Primary DNS Server. The primary DNS server that resolves IPv6 domain name
•
records for the router.
Secondary DNS Server. The secondary DNS server that resolves IPv6 domain
•
name records for the router.
Note: If you do not specify the DNS servers, the router uses the DNS servers that
are configured for the IPv4 Internet connection on the Internet Setup page. (See
Manually
set up the Internet connection on page 28.)
7. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices, but
•
some IPv6 systems might not support the DHCv6 client function.
Auto Config. This is the default setting.
•
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network.
8. (Optional) Select the Enable RIPng check box.
This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.
RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.
9.
In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix
length of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
10. Click the Apply button.
Your settings are saved.
User Manual38Specify Your Internet Settings
Page 39
Orbi Quad-Band Mesh WiFi 6E System
Set up an IPv6 DHCP Internet connection
To set up an IPv6 Internet connection with a DHCP server:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. From the Internet Connection Type menu, select DHCP.
The page adjusts.
The router automatically detects the information in the following fields:
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
•
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
•
for the router’s LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
6.
(Optional) In the User Class (If Required) field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name,
enter it here.
7.
(Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. Do not enter the domain name for
the IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this
field. For example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.
User Manual39Specify Your Internet Settings
Page 40
Orbi Quad-Band Mesh WiFi 6E System
8. Select an IPv6 Domain Name Server (DNS) Address radio button:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
•
Your ISP automatically assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select
•
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
9. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices, but
•
some IPv6 systems might not support the DHCv6 client function.
Auto Config. This is the default setting.
•
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
10. (Optional) Select the Enable RIPng check box.
This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.
RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.
11.
(Optional) Select the Use This Interface ID check box and specify the interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
12. Click the Apply button.
Your settings are saved.
Set up an IPv6 PPPoE Internet connection
To set up a PPPoE IPv6 Internet connection:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. From the Internet Connection Type menu, select PPPoE.
The page adjusts.
The router automatically detects the information in the following fields:
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
•
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
•
for the router’s LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
6.
To use the same login information as you do for IPv4 PPPoE connections, select the
Use the same Login information as IPv4 PPPoE check box. Otherwise, configure
the following settings:
a.
In the Login field, enter the login information for the IPv6 PPPoE ISP connection.
This is usually the name that you use in your email address. For example, if your
main mail account is JerAB@ISP.com, you would type JerAB in this field. Some
ISPs (like Earthlink and Deutsche Telekom) require that you use your full email
address when you log in. If your ISP requires your full email address, type it in
this field.
b.
In the Password field, enter the password for the IPv6 PPPoE ISP connection.
c.
In the Service Name field, enter a service name for the IPv6 PPPoE ISP connection.
If your ISP did not provide a service name, leave this field blank.
Note: The default setting of the Connection Mode field is Always On to provide a
steady IPv6 connection. The router never terminates the connection. If the connection
is terminated, for example, when the modem is turned off, the router attempts to
reestablish the connection immediately after the PPPoE connection becomes available
again.
7. Select an IPv6 Domain Name Server (DNS) Address radio button:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
•
Your ISP automatically assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select
•
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
User Manual41Specify Your Internet Settings
Page 42
Orbi Quad-Band Mesh WiFi 6E System
8. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices, but
•
some IPv6 systems might not support the DHCv6 client function.
Auto Config. This is the default setting.
•
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
9. (Optional) Select the Enable RIPng check box.
This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.
RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.
10.
(Optional) Select the Use This Interface ID check box and specify the interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
11. Click the Apply button.
Your settings are saved.
Set up an IPv6 6rd tunnel Internet connection
The 6rd protocol makes it possible to deploy IPv6 to sites using a service provider’s
IPv4 network. 6rd uses the service provider’s own IPv6 address prefix. This limits the
operational domain of 6rd to the service provider’s network and is under direct control
of the service provider. The IPv6 service provided is equivalent to native IPv6. The 6rd
mechanism relies on an algorithmic mapping between the IPv6 and IPv4 addresses that
are assigned for use within the service provider’s network. This mapping allows for
automatic determination of IPv4 tunnel endpoints from IPv6 prefixes, allowing stateless
operation of 6rd.
With a 6rd Tunnel configuration, the router follows the RFC5969 standard, supporting
two ways to establish a 6rd tunnel IPv6 WAN connection:
Auto Detect Mode. In IPv6 Auto Detect mode, when the router receives option 212
•
from the DHCPv4 option, auto detect selects the IPv6 as 6rd Tunnel setting. The
router uses the 6rd option information to establish the 6rd connection.
Manual Mode. Select 6rd. If the router receives option 212, the fields are
•
automatically completed. Otherwise, you must enter the 6rd settings.
User Manual42Specify Your Internet Settings
Page 43
Orbi Quad-Band Mesh WiFi 6E System
To set up an IPv6 6rd tunnel Internet connection:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. In the Internet Connection Type menu, select 6rd Tunnel.
The page adjusts.
The router automatically detects the information in the following sections:
6rd (IPv6 Rapid Development) Configuration. The router detects the service
•
provider’s IPv4 network and attempts to establish an IPv6 6rd Tunnel connection.
If the IPv4 network returns 6rd parameters to the router, the page adjusts to
display the correct settings in this section.
Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
•
for the router’s LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
6. Select an IPv6 Domain Name Server (DNS) Address radio button:
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
•
Your ISP automatically assigns this address.
Use These DNS Servers. If you know that your ISP requires specific servers, select
•
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary
DNS server address is available, enter it also.
7. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices, but
•
some IPv6 systems might not support the DHCv6 client function.
Auto Config. This is the default setting.
•
User Manual43Specify Your Internet Settings
Page 44
Orbi Quad-Band Mesh WiFi 6E System
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network.
8. (Optional) Select the Enable RIPng check box.
This selection enables RIP Next Generation (RIPng) on IPv6 Internet connections.
RIPng is an extension of Routing Information Protocol (RIP) that supports IPv6.
9.
(Optional) Select the Use This Interface ID check box and specify the interface ID
that you want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
10.
(Optional) To set a specific MTU size for an IPv6 6rd tunnel Internet connection,
specify the MTU size in the MTU Size (in bytes) field.
11. Click the Apply button.
Your settings are saved.
Change the MTU size
The maximum transmission unit (MTU) is the largest data packet a network device
transmits. When one network device communicates across the Internet with another,
the data packets travel through many devices along the way. If a device in the data path
uses a lower MTU setting than the other devices, the data packets must be split or
“fragmented” to accommodate the device with the smallest MTU.
The best MTU setting for NETGEAR equipment is often the default value. In some
situations, changing the value fixes one problem but causes another. Leave the MTU
unchanged unless one of these situations occurs:
You experience problems connecting to your ISP or other Internet service, and the
•
technical support of either the ISP or NETGEAR recommends changing the MTU
setting.
For example, if a secure website does not open, or displays only part of a web page,
you might need to change the MTU.
You use VPN and experience severe performance problems.
•
You used a program to optimize MTU for performance reasons, and now you are
•
experiencing connectivity or performance problems.
Note: An incorrect MTU setting can cause Internet communication problems. For
example, you might not be able to access certain websites, frames within websites,
secure login pages, or FTP or POP servers.
User Manual44Specify Your Internet Settings
Page 45
Orbi Quad-Band Mesh WiFi 6E System
To change the MTU size:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5.
In the MTU Size field, enter a value from 616 to 1500.
6. Click the Apply button.
Your settings are saved.
If you suspect an MTU problem, a common solution is to change the MTU to 1400.
If you are willing to experiment, you can gradually reduce the MTU from the maximum
value of 1500 until the problem goes away. The following table describes common
MTU sizes and applications.
Table 5. Common MTU sizes
ApplicationMTU
1500
The largest Ethernet packet size. This setting is typical for connections that do not use PPPoE
or VPN, and is the default value for NETGEAR routers, adapters, and switches.
Used in PPPoE environments.1492
Maximum size to use for pinging. (Larger packets are fragmented.)1472
Used in some DHCP environments.1468
Used in PPTP environments or with VPN.1436
User Manual45Specify Your Internet Settings
Page 46
4
Control Access to the Internet
The router comes with a built-in firewall that helps protect your home network from
unwanted intrusions from the Internet.
This chapter includes the following sections:
•Manage
•Allow or block access to your network
•Manage network access control lists
•Use keywords to block Internet sites
•Delete keywords that are used to block Internet sites
•Avoid blocking on a trusted computer
•Block services from the Internet
•Schedule when to block Internet sites and services
•Set up security event email notifications
NETGEAR Armor
46
Page 47
Orbi Quad-Band Mesh WiFi 6E System
Manage NETGEAR Armor
NETGEAR Armor protects your home network from potential cyber threats and provides
complete data protection, advanced threat defense, webcam protection, multilayer
ransomware protection, anti-phishing, safe files, secure browsing, rescue mode,
anti-fraud, and anti-theft. In addition, NETGEAR Armor provides multiple performance
and privacy tools.
NETGEAR Armor can support features for your Windows-based computers and your
Mac OS, iOS, and Android devices.
For more information about NETGEAR Armor, visit netgear.com/home/services/armor/
You can manage NETGEAR Armor from the Orbi app.
Allow or block access to your network
If you did not enable NETGEAR Smart Parental Controls (SPC) in the Orbi app, you can
use access control in the router web interface to allow or block access to your network.
To set up access control:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Select the Turn on Access Control check box.
You must select this check box before you can specify an access rule and use the
Allow and Block buttons. When this check box is cleared, all devices are allowed to
connect, even if a device is in the blocked list.
User Manual47Control Access to the Internet
Page 48
Orbi Quad-Band Mesh WiFi 6E System
6. Select an access rule:
Allow all new devices to connect. With this setting, if you buy a new device, it
•
can access your network. You don’t need to enter its MAC address on this page.
We recommend that you leave this radio button selected.
Block all new devices from connecting. With this setting, if you buy a new
•
device, before it can access your network, you must enter its MAC address for
an Ethernet connection and its MAC address for a WiFi connection in the allowed
list.
The access rule does not affect previously blocked or allowed devices. It applies
only to devices joining your network in the future after you apply these settings.
7. To allow the computer or device you’re currently using to continue to access the
network, select the check box next to your computer or device, and click the Allow
button.
8.
To view a list of allowed or blocked devices that are not connected, click one of the
following links:
View list of allowed devices not currently connected to the network
•
View list of blocked devices not currently connected to the network
•
The list displays.
9. Click the Apply button.
Your settings are saved.
Manage network access control lists
If you did not enable NETGEAR Smart Parental Controls (SPC) in the Orbi app, you can
use the router web interface to manage network access control lists (ACLs) to block or
allow access of devices to your network.
To manage devices that are allowed or blocked:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
User Manual48Control Access to the Internet
Page 49
Orbi Quad-Band Mesh WiFi 6E System
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Select the Turn on Access Control check box.
6.
Click the View list of allowed devices not currently connected to the network
link.
The list displays.
7.
Select the check box for a device.
8.
Use the Add button, Edit button, and Remove from the list button as needed.
9. Click the Apply button.
Your settings are saved.
Use keywords to block Internet sites
You can use keywords to block certain Internet sites from your network. You can use
blocking all the time or based on a schedule.
To block Internet sites:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
To delete a single word, select it and click the Delete Keyword button.
•
The keyword is removed from the list.
To delete all keywords on the list, click the Clear List button.
•
All keywords are removed from the list.
User Manual50Control Access to the Internet
Page 51
Orbi Quad-Band Mesh WiFi 6E System
6. Click the Apply button.
Your settings are saved.
Avoid blocking on a trusted computer
You can exempt one trusted computer from blocking. The computer that you exempt
must be assigned a fixed IP address. You can use the reserved IP address feature to
specify the IP address. See Manage
To specify a trusted computer:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
reserved LAN IP addresses on page 79.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
To block the services all the time, select the Always radio button.
•
To block the services based on a schedule, select the Per Schedule radio button.
•
For information about how to specify the schedule, see Schedule
when to block
Internet sites and services on page 53.
6. Click the Add button.
The Block Services Setup page displays.
7. To add a service that is in the Service Type list, select the application or service.
The settings for this service automatically display in the fields.
8.
To add a service or application that is not the list, select User Defined.
a.
If you know that the application uses either TCP or UDP, select the appropriate
protocol.
Otherwise, select TCP/UDP (both).
b. Enter the starting port and ending port numbers.
If the service uses a single port number, enter that number in both fields.
•
To find out which port numbers the service or application uses, you can contact
•
the publisher of the application, ask user groups or newsgroups, or search
on the Internet.
9.
To specify how to filter the services, select one of the following radio buttons:
Only This IP Address. Block services for a single computer.
•
IP Address Range. Block services for a range of computers with consecutive IP
•
addresses on your network.
All lP Addresses. Block services for all computers on your network.
•
User Manual52Control Access to the Internet
Page 53
Orbi Quad-Band Mesh WiFi 6E System
10. Click the Add button.
Your settings are saved.
Schedule when to block Internet sites and
services
When you schedule blocking, the same schedule is used to block sites and to block
services. For information about how to specify what you want the router to block, see
keywords to block Internet sites on page 49 and Block services from the Internet
Use
on page 51.
To schedule blocking:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Schedule.
5.
Specify when to block keywords and services:
Days to Block. Select the check box for each day that you want to block the
•
keywords or select the Every Day check box, which automatically selects the
check boxes for all days.
Time of Day to Block. Select a start and end time in 24-hour format, or select
•
All Day for 24-hour blocking.
6. Click the Apply button.
Your settings are saved.
Set up security event email notifications
The router can email you its logs of router activity. The log records router activity and
security events such as attempts to access blocked sites or services.
User Manual53Control Access to the Internet
Page 54
Orbi Quad-Band Mesh WiFi 6E System
To set up email notifications:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > E-mail.
The E-mail page displays.
5.
Select the Turn Email Notification On check box.
6.
In the Primary E-mail Address field, enter the email address to which logs and alerts
are sent.
This email address is also used for the From address. If this field is blank, log and
alert messages are not sent.
7.
In the Your Outgoing Mail Server field, enter the name of your ISP outgoing (SMTP)
mail server (such as mail.myISP.com).
You might be able to find this information in the configuration window of your email
program. If you leave this field blank, log and alert messages are not sent.
8.
In the Outgoing Mail Server Port Number field, enter your mail server’s port
number.
You might be able to find this information in the configuration window of your email
program.
9.
If your outgoing email server requires authentication, select the My Mail Serverrequires authentication check box and do the following:
In the User Name field, type the user name for the outgoing email server.
•
In the Password field, type the password for the outgoing email server.
•
10. To send alerts immediately, select the Send Alerts Immediately check box.
Email alerts are sent immediately when someone attempts to visit a blocked site.
User Manual54Control Access to the Internet
Page 55
Orbi Quad-Band Mesh WiFi 6E System
11.
To send logs based on a schedule, specify these settings:
From Send logs according to this schedule menu, select the schedule type.
•
From the Day menu, select the day.
•
From the Time menu, select the time, and select the am or pm radio button.
•
12. Click the Apply button.
Your settings are saved.
Logs are sent automatically. If the log fills before the specified time, it is sent. After
the log is sent, it is cleared from the router memory. If the router cannot email the
log and the log buffer fills, the router overwrites the log.
User Manual55Control Access to the Internet
Page 56
5
Specify Network Settings
This chapter includes the following sections:
•About
•Manage the settings for the main WiFi network
•Manage WiFi settings for the 6 GHz-only WiFi network
•Manage the IoT WiFi settings
•Set up a guest WiFi network
•Change your region
•View or change WAN settings
•Manage the WAN preference
•Manage Dynamic DNS
•Set up a default DMZ server
•Change the router’s device name
•Change the LAN TCP/IP settings
•Use the router as a DHCP server
•Disable the DHCP server feature in the router
•Manage reserved LAN IP addresses
•Manage custom static routes
•Enable or disable 20/40 MHz coexistence for the 2.4 GHz radio
•Enable or disable Wi-Fi Multimedia Quality of Service
•Change the CTS/RTS threshold and preamble mode for a radio
•Change the Transmission Power Control
•Use the router as a WiFi access point only
•Set up router mode
•Generate a new backhaul password
•Improve network connections with Universal Plug and Play
•Set up a bridge for a port group or VLAN tag group
the WiFi networks
56
Page 57
Orbi Quad-Band Mesh WiFi 6E System
About the WiFi networks
The router provides four WiFi networks:
Main network: The main WiFi network of the router broadcasts simultaneously in
•
the 2.4 GHz, 5 GHz, and 6 GHz radio bands. The router supports automatic
bandsteering between these three radio bands in the main WiFi network. The main
network is enabled by default. You cannot disable the main network, or broadcast
of the 2.4 GHz, 5 GHz, and 6 GHz radio bands in the main network. You can change
the WiFi network name (SSID), security option, and password for the main network,
all of which are unique to the main network. However, if you change the following
settings for the main network, the changes apply to all WiFi networks on the router:
-
AX feature: By default, the AX feature is always enabled for the 2.4 GHz, 5 GHz,
and 6 GHz radio bands. You can disable the AX feature for the 2.4 GHz and 5 GHz
radio bands individually. The feature is always enabled for the 6 GHz radio band.
-
Channels: You can set fixed channels for the 2.4 GHz, 5 GHz, and 6 GHz radio
bands individually.
6 GHz-only network: The optional, separate 6 GHz-only WiFi network (that is,
•
separate from the 6 GHz radio band in the main WiFi network) is disabled by default.
If you enable the 6 GHz-only network, it does not participate in automatic
bandsteering in the main WiFi network. You can change the WiFi network name
(SSID), security option, and password for the 6 GHz-only network, all of which are
unique to the 6 GHz-only network.
IoT network: The Internet of things (IoT) network is enabled by default so that you
•
can connect WiFi-enabled smart devices that can range from light bulbs to appliances.
If you do not need the IoT network, you can disable it. You can select the radio bands
for the IoT network and change the WiFi network name (SSID), security option, and
password, all of which are unique to the IoT network.
Guest network: The optional guest network is disabled by default, but you can
•
enable it so that guests and visitors can connect to your WiFi without compromising
the security of your other WiFi networks. You can change the WiFi network name
(SSID), security option, and password for the guest network, all of which are unique
to the guest network.
User Manual57Specify Network Settings
Page 58
Orbi Quad-Band Mesh WiFi 6E System
Manage the settings for the main WiFi
network
The router and satellite come preset with the same WiFi network name (SSID) and the
same WiFi security. You can find the SSID and password on the router label and on the
satellite label. If you log in to the router and change the WiFi settings, the router
automatically sends the new settings to the satellite.
If you change your WiFi settings, make a note of the new settings and store it in a safe
place where you can easily find it.
If your computer or mobile device is using a WiFi connection when you change the
network name (SSID) or other WiFi security settings, you are disconnected when you
click the Apply button. To avoid this problem, use a computer with a wired connection
to access the router.
Enable or disable the AX feature for the 2.4 GHz or 5 GHz
radio band
The AX feature improves your network’s WiFi capacity, Internet upload and download
speeds, and WiFi range by allowing WiFi traffic from different devices to be concurrently
managed. To do this, the AX feature uses Orthogonal Frequency-Division Multiple-Access
(OFDMA), 4x4 multi-user MIMO, and intelligent scheduling.
The AX feature is enabled by default for the 2.4 GHz and 5 GHz radio bands. You cannot
disable WiFi broadcast for the 2.4 GHz and 5 GHz radio bands, but you can disable the
AX feature for the 2.4 GHz and 5 GHz radio bands. For the 6 GHz radio band, the AX
feature is always enabled.
Note: If you change the AX feature for the 2.4 GHz or 5 GHz radio band, the change
also applies to the IoT network and the guest network.
To enable or disable the AX feature for the 2.4 GHz or 5 GHz radio band:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.net.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
User Manual58Specify Network Settings
Page 59
Orbi Quad-Band Mesh WiFi 6E System
4. Select Wireless.
The Wireless Setup page displays.
5.
In the Enable AX section, select or clear the following check boxes:
Enable 2.4 GHz: Selecting the check box enables the AX feature for the 2.4 GHz
•
radio band. Clearing this check box disables the AX feature for the 2.4 GHz radio
band.
Enable 5 GHz: Selecting the check box enables the AX feature for the 5 GHz
•
radio band. Clearing this check box disables the AX feature for the 5 GHz radio
band.
6. Click the Apply button.
Your settings are saved.
Change the name of the main WiFi network
To change the WiFi network name (SSID) of the main WiFi network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5.
Enter a new name in the Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID
is randomly generated and is on the router’s label. If you change the name, make
sure to write down the new name and keep it in a safe place.
6. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
If you are using a WiFi connection and you changed the SSID, you are disconnected
from the network.
User Manual59Specify Network Settings
Page 60
Orbi Quad-Band Mesh WiFi 6E System
Change the 2.4 GHz, 5 GHz, or 6 GHz WiFi channel
You can change the 2.4 GHz, 5 GHz, or 6 GHz WiFi channel.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. The recommended channel spacing between adjacent
access points is four channels (for example, for the 2.4 GHz radio band, use Channels
1 and 5, or 6 and 10).
Note: If you change the 2.4 GHz or 5 GHz channel, the change also applies to the IoT
network and the guest network. If you change the 6 GHz channel, the change also
applies to the separate 6 GHz-only network.
To change the WiFi channel:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5.
To change the 2.4 GHz, 5 GHz, or 6 GHz WiFi channel, select a number from one of
the following menus:
2.4 GHz Channel
•
5 GHz Channel
•
6 GHz Channel
•
Note: You can change the channel for one, two, or all three radio bands.
6. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
User Manual60Specify Network Settings
Page 61
Orbi Quad-Band Mesh WiFi 6E System
Change the WiFi password or security option for the main
WiFi network
The router and satellite come preset with the same WiFi network name (SSID) and the
same WiFi security. You can find the SSID and password on the router label and on the
satellite label. If you log in to the router and change the WiFi settings, the router
automatically sends the new settings to the satellite.
To change the WiFi password or security option for the main WiFi network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the Security Options section, select a radio button:
WPA2-PSK [AES] + WPA3-Personal [SAE]
•
WPA3-Personal [SAE]
•
6.
In the Password (Network Key) field, enter the network key (password) that you
want to use.
Enter a text string from 8 to 127 characters.
7.
Write down the new password and keep it in a secure place for future reference.
8. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
User Manual61Specify Network Settings
Page 62
Orbi Quad-Band Mesh WiFi 6E System
Manage WiFi settings for the 6 GHz-only WiFi
network
The router supports a separate 6 GHz-only WiFi network, that is, separate from the 6 GHz
band in the main WiFi network. For this separate 6 GHz WiFi network, you can enable
or disable the WiFi broadcast, change the WiFi network name, and change the password.
Because the 6 GHz-only network is a separate network from the main WiFi network, it
does not participate in automatic bandsteering in the main WiFi network.
Enable or disable the 6 GHz-only network
By default, the 6 GHz-only WiFi network is disabled, but you can enabled it.
To enable or disable the 6 GHz-only network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the 6 GHz Wireless Settings section, select or clear the Enable 6 GHz OnlyNetwork check box.
Selecting the check box enables the 6 GHz-only WiFi network. Clearing this check
box disables the 6 GHz-only WiFi network.
6. Click the Apply button.
Your settings are saved.
User Manual62Specify Network Settings
Page 63
Orbi Quad-Band Mesh WiFi 6E System
Change the WiFi network name for the 6 GHz-only network
To change the WiFi network name (SSID) for the 6 GHz-only network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the 6 GHz Wireless Settings section, select Wireless.
6.
Enter a new name in the Name (6 GHz SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID
is randomly generated and is on the router’s label. If you change the name, make
sure to write down the new name and keep it in a safe place.
7. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
Change the WiFi password for the 6 GHz-only network
To change the WiFi password for the 6 GHz-only network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
User Manual63Specify Network Settings
Page 64
Orbi Quad-Band Mesh WiFi 6E System
5. In the 6 GHz Wireless Settings section, create a new password (network key) by
entering it in the Password (Network Key) field.
Enter a text string from 8 to 127 characters.
6.
Write down the new password and keep it in a secure place for future reference.
7. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
Manage the IoT WiFi settings
You can enable or disable the Internet of things (IoT) WiFi network, change the IoT WiFi
radio band, change the IoT WiFi network name, and change the IoT WiFi password or
security option.
Enable or disable the IoT network
To enable or disable the IoT network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.net.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the Wireless IoT Settings section, select or clear the Enable IoT Network check
box.
Selecting the check box enables the IoT network. Clearing this check box disables
the IoT network.
6. Click the Apply button.
Your settings are saved.
User Manual64Specify Network Settings
Page 65
Orbi Quad-Band Mesh WiFi 6E System
Change the WiFi radio band for the IoT network
To change the WiFi radio band fort the IoT network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5.
In the Wireless IoT Settings section, select one of the following radio buttons:
2.4 GHz and 5 GHz
•
2.4 GHz only
•
5 GHz only
•
6. Click the Apply button.
Your settings are saved.
Change the WiFi network name for the IoT network
To change the WiFi network name (SSID) for the IoT network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
User Manual65Specify Network Settings
Page 66
Orbi Quad-Band Mesh WiFi 6E System
5.
In the Wireless IoT Settings section, enter a new name in the IoT Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID
is randomly generated and is on the router’s label. If you change the name, make
sure to write down the new name and keep it in a safe place.
6. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
Change the WiFi password or security option for the IoT
network
To change the WiFi password or security option for the IoT network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the IoT Security Options section, select a radio button:
WPA2-PSK [AES]
•
WPA-PSK [TKIP] + WPA2-PSK [AES]
•
6.
In the Password (Network Key) field, create a new password (network key).
Enter a text string from 8 to 63 characters.
7.
Write down the new password and keep it in a secure place for future reference.
8. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
User Manual66Specify Network Settings
Page 67
Orbi Quad-Band Mesh WiFi 6E System
Set up a guest WiFi network
To set up a guest WiFi network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Guest Network.
The Guest Network Settings page displays.
5. Select the Enable Guest Network check box.
6. To change the network name, type a new name in the Guest Wireless NetworkName (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. If you change the
name, make sure to write down the new name and keep it in a safe place.
By default, security and encryption are disabled for the guest WiFi network. (Under
Security Options, the None radio button is selected).
7.
To enable security and encryption for the guest WiFi network, under Security Options,
select a WPA radio button:
WPA2-PSK [AES]
•
WPA2-PSK [AES] + WPA3-Personal [SAE]
•
WPA3-Personal [SAE]
•
The WPA3 option uses the newest standard for the strongest security.
Some older computers and WiFi devices cannot use WPA3. If your network includes
such computers and WiFi devices, select the WPA2-PSK [AES] radio button.
The Password (Network Key) field displays.
8.
In the Password (Network Key) field, enter the network key (password) that you
want to use.
For WPA2, it is a text string from 8 to 63 characters. For WPA3, it is a text string from
8 to 127 characters.
User Manual67Specify Network Settings
Page 68
Orbi Quad-Band Mesh WiFi 6E System
9.
Write down the new password and keep it in a secure place for future reference.
10. Click the Apply button.
Your settings are saved. The router sends the new settings to the satellite.
Change your region
To view or change your region:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. In the Region menu, select your region.
In some locations, you cannot change this setting.
6. Click the Apply button.
Your settings are saved.
View or change WAN settings
You can view or configure wide area network (WAN) settings for the Internet port. You
can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU)
size, and enable the router to respond to a ping to its WAN (Internet) port.
To view the WAN settings:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
User Manual68Specify Network Settings
Page 69
Orbi Quad-Band Mesh WiFi 6E System
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup
The WAN Setup page displays.
5.
View or change the following settings:
Disable Port Scan and DoS Protection. DoS protection protects your LAN against
•
denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, and many
others. Select this check box only in special circumstances.
Default DMZ Server. This feature is sometimes helpful when you are playing
•
online games or videoconferencing, but it makes the firewall security less effective.
See Set
up a default DMZ server on page 74.
Respond to Ping on Internet Port. This feature allows your router to be
•
discovered. Use this feature only as a diagnostic tool or if you have a specific
reason.
Disable IGMP Proxying. IGMP proxying allows a computer on the local area
•
network (LAN) to receive the multicast traffic it is interested in from the Internet.
If you do not need this feature, select this check box to disable it.
MTU Size (in bytes). The normal MTU (maximum transmit unit) value for most
•
Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. Change
the MTU only if you are sure that it is necessary for your ISP connection. See
Change
NAT Filtering. Network Address Translation (NAT) determines how the router
•
the MTU size on page 44.
processes inbound traffic. Secured NAT protects computers on the LAN from
attacks from the Internet, but might prevent some Internet games, point-to-point
applications, or multimedia applications from working. Open NAT provides a
much less secured firewall, but allows almost all Internet applications to work.
Disable SIP ALG. The application-level gateway (ALG) for the Session Initiation
•
Protocol (SIP) is enabled by default for enhanced address and port translation.
However, some types of VoIP and video traffic might not work well when the SIP
ALG is enabled. For this reason, the router provides the option to disable the SIP
ALG.
6. Click the Apply button.
Your settings are saved.
User Manual69Specify Network Settings
Page 70
Orbi Quad-Band Mesh WiFi 6E System
Manage the WAN preference
By default, your router’s WAN preference is set to use the 10G Internet port, and you
can connect a modem to the 10G Internet port.
Note: If both your Internet service provider (ISP) and modem support a speed of
10 Gbps, the router’s Internet connection also functions at 10 Gbps. Otherwise, the
Internet connection functions at the maximum speed that either your ISP or your modem
supports. (1 Gbps is a common speed.)
You can also change the WAN preference to WAN aggregation. An aggregated WAN
connection is connected to your Internet Service Provider (ISP). The benefits of WAN
aggregation include seamless multi-gig connectivity and the full speed of your ISP
connection for the connected device.
Set up WAN aggregation
An aggregated WAN (Internet) link is connected to your Internet Service Provider (ISP).
The benefits of WAN aggregation include seamless multi-gig connectivity and the full
speed of your ISP connection for the connected device.
To set up WAN aggregation, you need a modem that supports Link Aggregation Control
Protocol (LACP).
To set up WAN aggregation with the Orbi router:
1. Set up WAN aggregation on your modem.
For information about how to set up WAN aggregation on your modem, see the
documentation that came with your modem.
2. Log in to your router and enable WAN port aggregation:
a.
Launch a web browser from a computer or mobile device that is connected to
the Orbi network.
b. Enter orbilogin.com.
A login window opens.
c. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
d. Select ADVANCED > Setup > Internet Setup.
The Internet Setup page displays.
User Manual70Specify Network Settings
Page 71
Orbi Quad-Band Mesh WiFi 6E System
e.
In the WAN Preference section, select the WAN aggregation (10 Gbps + 2.5Gbps, LACP-IEEE802.3ad) radio button.
Click the Apply button.
f.
Your settings are saved.
3. Connect the 10G Internet port and the 2.5G Ethernet port on your router to two
Ethernet ports on your modem.
Change the WAN preference back to the Internet port
By default, your router's WAN preference is set to use the 10G Internet port, and you
can connect a modem to the 10G Internet port.
If you set up WAN aggregation, you can change the WAN preference back to the 10G
Internet port.
To change the WAN preference back to the 10G Internet port:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > Internet Setup.
The Internet Setup page displays.
5.
In the WAN Preference section, select the Internet port (10 Gbps) radio button.
6. Click the Apply button.
Your settings are saved.
Manage Dynamic DNS
Internet service providers (ISPs) assign numbers called IP addresses to identify each
Internet account. Most ISPs use dynamically assigned IP addresses. This means that the
IP address can change at any time. You can use the IP address to access your network
remotely, but most people don’t know what their IP addresses are or when this number
changes.
User Manual71Specify Network Settings
Page 72
Orbi Quad-Band Mesh WiFi 6E System
To make it easier to connect, you can get a free account with a Dynamic DNS service
that lets you use a domain name to access your home network. To use this account, you
must set up the router to use Dynamic DNS. Then the router notifies the Dynamic DNS
service provider whenever its IP address changes. When you access your Dynamic DNS
account, the service finds the current IP address of your home network and automatically
connects you.
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the Dynamic
DNS service does not work because private addresses are not routed on the Internet.
Set up a new Dynamic DNS account
To set up Dynamic DNS and register for a free NETGEAR account:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > Dynamic DNS.
The Dynamic DNS page displays.
5. Select the Use a Dynamic DNS Service check box.
6. In the Service Provider list, select NETGEAR.
7. Select the No radio button.
8.
In the Host Name field, type the name that you want to use for your URL.
The host name is sometimes called the domain name. Your free URL includes the
host name that you specify, and ends with mynetgear.com. For example, specify
MyName.mynetgear.com.
9.
In the Email field, type the email address that you want to use for your account.
10.
In the Password (6-32 characters) field, type the password for your account.
11.
To agree to the terms of service, select the check box above the Register button.
12. Click the Register button.
13.
Follow the onscreen instructions to register for your NETGEAR Dynamic DNS service.
14. To check that Dynamic DNS is enabled in the router, click the Show Status button.
User Manual72Specify Network Settings
Page 73
Orbi Quad-Band Mesh WiFi 6E System
A message displays the Dynamic DNS status.
Specify a Dynamic DNS account that you already created
If you already own a Dynamic DNS account with NETGEAR, No-IP, or DynDNS, you can
set up the router to use your account.
To set up Dynamic DNS if you already created an account:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > Dynamic DNS.
The Dynamic DNS page displays.
5. Select the Use a Dynamic DNS Service check box.
6. In the Service Provider list, select your provider.
7. Select the Yes radio button.
The page adjusts and displays to show the Status, Cancel, and Apply buttons.
8.
In the Host Name field, type the host name (sometimes called the domain name)
for your account.
9.
For a No-IP account or DynDNS account, in the User Name field, enter the user
name for your account.
10.
For a NETGEAR account, in the Email field, type the email address for your account.
11.
In the Password (6-32 characters) field, type the password for your DDNS account.
12. Click the Apply button.
Your settings are saved.
13.
To verify that your Dynamic DNS service is enabled in the router, click the ShowStatus button.
A message displays the Dynamic DNS status.
User Manual73Specify Network Settings
Page 74
Orbi Quad-Band Mesh WiFi 6E System
Change the Dynamic DNS settings
To change your settings:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > Dynamic DNS.
The Dynamic DNS page displays.
5. Change your DDNS account settings as necessary.
6. Click the Apply button.
Your settings are saved.
Set up a default DMZ server
The default DMZ server feature is helpful when you are using some online games and
videoconferencing applications that are incompatible with Network Address Translation
(NAT). The router is programmed to recognize some of these applications and to work
correctly with them, but other applications might not function well. In some cases, one
local computer can run the application correctly if the IP address for that computer is
entered as the default DMZ server.
DMZ servers pose a security risk. A computer designated as the default DMZ server
loses much of the protection of the firewall and is exposed to exploits from the Internet.
If compromised, the DMZ server computer can be used to attack other computers on
your network.
The router usually detects and discards incoming traffic from the Internet that is not a
response to one of your local computers or a service that you configured in the Port
Forwarding/Port Triggering page. Instead of discarding this traffic, you can specify that
the router forwards the traffic to one computer on your network. This computer is called
the default DMZ server.
User Manual74Specify Network Settings
Page 75
Orbi Quad-Band Mesh WiFi 6E System
To set up a default DMZ server:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5.
Select the Default DMZ Server check box.
6. Type the IP address.
7. Click the Apply button.
Your settings are saved.
Change the router’s device name
The router’s device name is its model number. This device name displays in a file
manager when you browse your network.
To change the router’s device name:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > Device Name.
The Device Name page displays.
5.
In the Device Name field, type a new name.
User Manual75Specify Network Settings
Page 76
Orbi Quad-Band Mesh WiFi 6E System
6. Click the Apply button.
Your settings are saved.
Change the LAN TCP/IP settings
The router is preconfigured to use private IP addresses on the LAN side and to act as
a DHCP server. The router’s default LAN IP configuration is as follows:
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
•
These addresses are part of the designated private address range for use in private
networks and are suitable for most applications. If your network requires a different IP
addressing scheme, you can change these settings.
You might want to change these settings if you need a specific IP subnet that one or
more devices on the network uses, or if you use competing subnets with the same IP
scheme.
To change the LAN TCP/IP settings:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
In the IP Address field, type the IP address.
6.
In the IP Subnet Mask, type the subnet mask of the router.
The IP address and subnet mask identifies which addresses are local to a specific
device and which must be reached through a gateway or router.
7. Change the RIP settings.
User Manual76Specify Network Settings
Page 77
Orbi Quad-Band Mesh WiFi 6E System
Router Information Protocol (RIP) allows a router to exchange routing information
with other routers.
a. Select the RIP direction:
Both. The router broadcasts its routing table periodically and incorporates
•
information that it receives.
Out Only. The router broadcasts its routing table periodically.
•
In Only. The router incorporates the RIP information that it receives.
•
b. Select the RIP version:
Disabled. This is the default setting.
•
RIP-1. This format is universally supported. It is adequate for most networks,
•
unless you are using an unusual network setup.
RIP-2B. This format carries more information. RIP-2B sends the routing data
•
in RIP-2 format and uses subnet broadcasting.
RIP-2M. This format carries more information. RIP-2M sends the routing data
•
in RIP-2 format and uses multicasting.
8. Click the Apply button.
Your settings are saved.
If you changed the LAN IP address of the router, you are disconnected when this
change takes effect.
9. To reconnect, close your browser, relaunch it, and log in to the router.
Use the router as a DHCP server
By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The
router assigns IP, DNS server, and default gateway addresses to all computers connected
to the LAN. The assigned default gateway address is the LAN address of the router.
These addresses must be part of the same IP address subnet as the router’s LAN IP
address. Using the default addressing scheme, define a range between 192.168.1.2
and 192.168.1.254, although you can save part of the range for devices with fixed
addresses.
User Manual77Specify Network Settings
Page 78
Orbi Quad-Band Mesh WiFi 6E System
To use the router as a DHCP server and specify the pool of IP addresses that the
router assigns:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
If you previously disabled the DHCP server feature, select the Use Router as DHCPServer check box.
6.
Specify the range of IP addresses that the router assigns:
a.
In the Starting IP Address field, enter the lowest number in the range.
This IP address must be in the same subnet as the router. The default starting IP
address is 192.168.1.2.
b.
In the Ending IP Address field, enter the number at the end of the range of IP
addresses.
This IP address must be in the same subnet as the router. The default ending IP
address is 192.168.1.254.
7. Click the Apply button.
Your settings are saved.
The router delivers the following parameters to any LAN device that requests DHCP:
An IP address from the range that you defined
•
Subnet mask
•
Gateway IP address (the router’s LAN IP address)
•
DNS server IP address (the router’s LAN IP address)
•
User Manual78Specify Network Settings
Page 79
Orbi Quad-Band Mesh WiFi 6E System
Disable the DHCP server feature in the router
By default, the router acts as a DHCP server. The router assigns IP, DNS server, and
default gateway addresses to all computers connected to the LAN. The assigned default
gateway address is the LAN address of the router.
You can use another device on your network as the DHCP server, or specify the network
settings of all your computers.
To disable the DHCP server feature in the router:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Clear the Use Router as DHCP Server check box.
6. Click the Apply button.
7.
(Optional) If this service is disabled and no other DHCP server is on your network,
set your computer IP addresses manually so that they can access the router.
Manage reserved LAN IP addresses
When you specify a reserved IP address for a computer on the LAN, that computer
always receives the same IP address each time it accesses the router’s DHCP server.
Assign reserved IP addresses to computers or servers that require permanent IP settings.
User Manual79Specify Network Settings
Page 80
Orbi Quad-Band Mesh WiFi 6E System
Reserve an IP address
To reserve an IP address:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
In the Address Reservation section of the page, click the Add button.
6.
In the IP Address field, type the IP address to assign to the computer or server.
The page adjusts.
7.
Choose an IP address from the router’s LAN subnet, such as 192.168.1.x.
8.
Type the MAC address of the computer or server.
Tip: If the computer is already on your network, you can copy its MAC address from
the Attached Devices page and paste it here.
9. Click the Apply button.
The reserved address is entered into the table.
The reserved address is not assigned until the next time the computer contacts the
router’s DHCP server. Reboot the computer, or access its IP configuration and force
a DHCP release and renew.
Edit a reserved IP address
To edit a reserved address entry:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
User Manual80Specify Network Settings
Page 81
Orbi Quad-Band Mesh WiFi 6E System
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Select the radio button next to the reserved address.
6. Click the Edit button.
The Address Reservation page displays.
7. Change the settings.
8. Click the Apply button.
Your settings are saved.
Delete a reserved IP address entry
To delete a reserved address entry:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Select the radio button next to the reserved address.
6. Click the Delete button.
The address is removed.
User Manual81Specify Network Settings
Page 82
Orbi Quad-Band Mesh WiFi 6E System
Manage custom static routes
Typically, you do not need to add static routes unless you use multiple routers or multiple
IP subnets on your network.
As an example of when a static route is needed, consider the following case:
Your main Internet access is through a cable modem to an ISP.
•
Your home network includes an ISDN router for connecting to the company where
•
you are employed. This router’s address on your LAN is 192.168.1.100.
Your company’s network address is 134.177.0.0.
•
When you set up your router, two implicit static routes were created. A default route
was created with your ISP as the gateway, and a second static route was created to your
local network for all 192.168.1.x addresses. With this configuration, if you try to access
a device on the 134.177.0.0 network, your router forwards your request to the ISP. The
ISP forwards your request to the company where you are employed, and the company
firewall is likely to deny the request.
In this case you must define a static route, telling your router to access 134.177.0.0
through the ISDN router at 192.168.1.100. Here is an example:
The Destination IP Address and IP Subnet Mask fields specify that this static route
•
applies to all 134.177.x.x addresses.
The Gateway IP Address field specifies that all traffic for these addresses will be
•
forwarded to the ISDN router at 192.168.1.100.
The Private check box is selected only as a precautionary security measure in case
•
RIP is activated.
Set up a static route
To set up a static route:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.
Enable or disable 20/40 MHz coexistence
for the 2.4 GHz radio
20/40 coexistence allows a 20 MHz and 40 MHz channel width to be supported
simultaneously. By default, 20/40 MHz coexistence is enabled on the 2.4 GHz radio to
prevent interference between WiFi networks in your environment at the expense of the
WiFi speed. If no other WiFi networks are present in your environment, you can disable
User Manual84Specify Network Settings
Page 85
Orbi Quad-Band Mesh WiFi 6E System
20/40 MHz coexistence to increase the WiFi speed on the 2.4 GHz radio to the maximum
supported speed for the WiFi mode.
20/40 MHz coexistence does not apply to the 5 GHz and 6 GHz radios.
To enable or disable 20/40 MHz coexistence for the 2.4 GHz radio:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
In the Wireless Network (2.4Ghz b/g/n/ax section, select or clear the Enable 20/40MHz check box.
Selecting this check box enables 20/40 MHz coexistence and clearing this check
box disables 20/40 MHz coexistence.
By default, 20/40 MHz coexistence is enabled and the check box is selected.
6. Click the Apply button.
Your settings are saved. The 2.4 GHz radio restarts and WiFi clients might need to
reconnect.
Enable or disable Wi-Fi Multimedia Quality
of Service
Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes WiFi voice and video traffic
over the WiFi link. WMM QoS is automatically enabled.
WMM QoS prioritizes WiFi data packets from different applications based on four access
categories: voice, video, best effort, and background. For an application to receive the
benefits of WMM QoS, WMM must be enabled for both it and the client running that
application. Legacy applications that do not support WMM and applications that do
not require QoS are assigned to the best effort category, which receives a lower priority
than voice and video.
User Manual85Specify Network Settings
Page 86
Orbi Quad-Band Mesh WiFi 6E System
To enable or disable WMM QoS:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
In the Advanced Wireless Settings (2.4GHz b/g/n/ax), do one of the following:
To enable WMM for the 2.4 GHz radio, select the Enable WMM (Wi-Fi
•
multimedia) settings (2.4GHz b/g/n/ax) check box. (This is the default selection.)
To disable WMM for the 2.4 GHz radio, clear the Enable WMM (Wi-Fi
•
multimedia) settings (2.4GHz b/g/n/ax) check box.
6.
In the Advanced Wireless Settings (5GHz 802.11a/n/ac/ax) section, do one of the
following:
To enable WMM for the 5 GHz radio, select the Enable WMM (Wi-Fi multimedia)
•
settings (5GHz a/n/ac/ax) check box. (This is the default selection.)
To disable WMM for the 5 GHz radio, clear the Enable WMM (Wi-Fi multimedia)
•
settings (5GHz a/n/ac/ax) check box.
7. Click the Apply button.
Your settings are saved.
Change the CTS/RTS threshold and
preamble mode for a radio
For most WiFi networks, the CTS/RTS threshold and preamble mode work fine and we
recommend that you do not change the settings. (In general, these settings are intended
for WiFi testing.)
User Manual86Specify Network Settings
Page 87
Orbi Quad-Band Mesh WiFi 6E System
CAUTION: Do not change these settings unless directed by NETGEAR support or
unless you are sure what the consequences are. Incorrect settings might disable the
WiFi function of a radio unexpectedly.
IMPORTANT: If the smart connect feature is enabled, the CTS/RTS threshold and
preamble mode apply to both radios. That means that you cannot change the CTS/RTS
threshold and preamble mode for each radio individually.
To change the CTS/RTS threshold and preamble mode for a radio:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
In the CTS/RTS threshold (1-2347) field, enter a value from 1 to 2437.
The default value is 64.
6. Form the Preamble Mode menu, select the preamble mode:
Automatic: The automatic option (which is the default option) lets the router
•
process both long and short preambles.
Long Preamble: A long transmit preamble might provide a more reliable
•
connection or a slightly longer range.
Short Preamble: A short transmit preamble might give better performance.
•
CAUTION: Incorrect settings might disable the WiFi function for the selected radio
unexpectedly.
7. Click the Apply button.
Your settings are saved.
User Manual87Specify Network Settings
Page 88
Orbi Quad-Band Mesh WiFi 6E System
Change the Transmission Power Control
By default, your router’s transmission power is set to 100%. This allows your router to
give you whole home WiFi coverage. If you don’t need whole home WiFi coverage, and
you also want to save power consumption while using your router, you can lower the
transmission power of your router.
To change the transmission power control:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. In the Advanced Wireless Network (2.4 GHz b/g/n/ax) section, select a percentage
from the Transmit Power Control menu.
6. In the Advanced Wireless Network (5 GHz a/n/ac/ax) section, select a percentage
from the Transmit Power Control menu.
7. Click the Apply button.
Your settings are saved.
Use the router as a WiFi access point only
By default, the Orbi router functions as both a router and WiFi access point. You can
set up the router to run as a WiFi access point only on the same local network as another
router or gateway.
For example, you can use the Orbi router as a WiFi access point that connects to a
gateway or modem router that you already use for your Internet service. In this situation,
you do not need to change the settings for the gateway or modem router.
User Manual88Specify Network Settings
Page 89
Orbi Quad-Band Mesh WiFi 6E System
To set up the Orbi router as an AP after you set up your Internet connection:
1.
Use an Ethernet cable to connect the Internet port of the Orbi router to a LAN port
on your existing gateway or modem router.
2.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
3. Enter orbilogin.com.
A login window opens.
4. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced > Router / AP Mode.
The Router / AP Mode page displays.
6. Select the AP Mode radio button.
The page adjusts.
7. Select the IP address setting:
Get dynamically from existing router. The other router on the network assigns
•
an IP address to the Orbi router while the Orbi router is in AP mode.
Enable fixed IP settings on this device (not recommended). Use this setting
•
if you want to manually assign a specific IP address to the Orbi router while it is
in AP mode. Using this option effectively requires advanced network experience.
Note: To avoid interference with other routers or gateways in your network, we
recommend that you use different WiFi settings on each router and gateway. If the
other router or gateway is also a WiFi access point, you could turn off the WiFi radio
on the other router or gateway and use the Orbi router only for WiFi client access.
8. Click the Apply button.
The IP address of the Orbi router changes, and you are disconnected.
9. To reconnect, close and restart your browser and enter orbilogin.com.
User Manual89Specify Network Settings
Page 90
Orbi Quad-Band Mesh WiFi 6E System
Set up router mode
If you set up your router as an access point, you can change it back to a router.
To change the Orbi router mode back to router mode.
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced > Router / AP Mode.
The Router / AP Mode page displays.
5. Select the Router Mode radio button.
The page adjusts.
6. Click the Apply button.
Your settings are saved.
Generate a new backhaul password
The backhaul password is a security key that is used in WiFi communication between
the router and the satellite. You can generate a new backhaul password. After you
generate a new backhaul password, you must use the Sync button to build a new
backhaul connection so that the router and satellite can communicate with each other
using WiFi.
To generate a new backhaul password:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
User Manual90Specify Network Settings
Page 91
Orbi Quad-Band Mesh WiFi 6E System
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. In the Backhaul Password section, click the Generate button.
The router generates a new backhaul password.
Improve network connections with Universal
Plug and Play
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
If you use applications such as multiplayer gaming, peer-to-peer connections, or real-time
communications such as instant messaging or remote assistance, enable UPnP.
To enable Universal Plug and Play:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. Select the Turn UPnP On check box.
By default, this check box is selected. UPnP for automatic device configuration can
be enabled or disabled. If the Turn UPnP On check box is cleared, the router does
not allow any device to automatically control router resources, such as port
forwarding.
6. Type the advertisement period in minutes.
User Manual91Specify Network Settings
Page 92
Orbi Quad-Band Mesh WiFi 6E System
The advertisement period specifies how often the router broadcasts its UPnP
information. This value can range from 1 to 1440 minutes. The default period is 30
minutes. Shorter durations ensure that control points receive current device status
at the expense of more network traffic. Longer durations can compromise the
freshness of the device status but can significantly reduce network traffic.
7. Type the advertisement time to live in hops.
The time to live for the advertisement is measured in hops (steps) for each UPnP
packet sent. Hops are the steps a packet takes between routers. The number of hops
can range from 1 to 255. The default value for the advertisement time to live is 4
hops, which should be fine for most home networks. If you notice that some devices
are not being updated or reached correctly, it might be necessary to increase this
value.
8. Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing
the router and which ports (internal and external) that device opened. The UPnP
Portmap Table also displays what type of port is open and whether that port is still
active for each IP address.
9.
To refresh the information in the UPnP Portmap Table, click the Refresh button.
Set up a bridge for a port group or VLAN tag
group
Some devices, such as an IPTV, cannot function behind the router’s Network Address
Translation (NAT) service or firewall. Based on what your Internet service provider (ISP)
requires, for the device to connect to the ISP’s network directly, you can enable the
bridge between the device and the router’s Internet port or add new VLAN tag groups
to the bridge.
Note: If your ISP provides directions on how to set up a bridge for IPTV and Internet
service, follow those directions.
Note: This feature is only supported if the router is in router mode.
Set up a bridge for a port group
If the devices that are connected to the router’s Ethernet LAN port include an IPTV
device, your ISP might require you to set up a bridge for a port group for the router’s
Internet interface.
User Manual92Specify Network Settings
Page 93
Orbi Quad-Band Mesh WiFi 6E System
A bridge with a port group prevents packets that are sent between the IPTV device and
the router’s Internet port from being processed through the router’s Network Address
Translation (NAT) service.
To configure a port group and enable the bridge:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
Select the Enable VLAN / Bridge Settings check box.
The page expands.
6. Select the By bridge group radio button.
The section expands.
7. Select the Wired Ports check box that corresponds to the Ethernet port on the router
to which the device is connected.
You must select at least one Wired Ports check box. You can select more than one
check box.
8. Click the Apply button.
Your settings are saved.
Set up a bridge for a VLAN tag group
If the devices that are connected to the router’s Ethernet LAN ports include an IPTV
device, your ISP might require you to set up a bridge for a VLAN tag group for the
router’s Internet interface.
If you are subscribed to IPTV service, the router might require VLAN tags to distinguish
between the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group prevents
packets that are sent between the IPTV device and the router’s Internet port from being
processed through the router’s Network Address Translation (NAT) service.
User Manual93Specify Network Settings
Page 94
Orbi Quad-Band Mesh WiFi 6E System
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to
each VLAN tag group.
To add a VLAN tag group and enable the bridge:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
Select the Enable VLAN / Bridge Group check box.
The page expands.
6. Select the By VLAN tag group radio button.
The section expands.
7. Click the Add button.
The Add VLAN Rule page displays.
8.
Specify the settings as described in the following table.
DescriptionField
Name
Select the check box for a wired Ethernet port.
If your device is connected to an Ethernet port on the router, select the Ethernet port check box that
corresponds to the Ethernet port on the router to which the device is connected.
You must select at least one Ethernet port. You can select more than one port.
Enter a name for the VLAN tag group.
The name can be up to 10 characters.
Enter a value from 1 to 4094.VLAN ID
Enter a value from 0 to 7.Priority
9. Click the Add button.
The VLAN tag group is added.
User Manual94Specify Network Settings
Page 95
10. Click the Apply button.
Your settings are saved.
Orbi Quad-Band Mesh WiFi 6E System
User Manual95Specify Network Settings
Page 96
6
Mantain and Monitor Your Network
This chapter describes the router settings for administering and maintaining your router
and home network.
The chapter includes the following sections:
•Update
•Change the admin password
•Enable admin password reset
•Reset the admin password
•Always use HTTPS to access the router
•View router status and usage information
•Display Internet port statistics
•Check the Internet connection status
•View and manage logs of router activity
•View devices connected to the network or edit device information
•View satellites connected to the network or edit satellite information
•View the satellite status
•Check your Internet bandwidth
•Monitor Internet traffic
•Change the NTP server
•Set the time zone
•Manage the router configuration file
the router and satellite firmware
96
Page 97
Orbi Quad-Band Mesh WiFi 6E System
Update the router and satellite firmware
You can use the router web interface to check if new firmware is available and update
your router and satellite, or you can manually update the firmware for your router and
satellite.
Check for firmware updates
To check for new firmware and update your router and satellite:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
5. Click the Check button.
The router checks to see if new firmware is available for the router and satellite.
6.
If new firmware is available, click the Update All button.
The router locates and downloads the firmware for the router and satellite and begins
the update.
Note: To avoid the risk of corrupting the firmware, do not interrupt the upgrade.
For example, do not close the browser, click a link, or load a new page. Do not turn
off the router or satellite.
When the upload is complete, your router and satellite restart. The update process
typically takes about one minute. Read the new firmware release notes to find out if
you must reconfigure the router after updating.
Network
User Manual97Mantain and Monitor Your
Page 98
Orbi Quad-Band Mesh WiFi 6E System
Manually update firmware
If a satellite is connected to your router, you can log in to the router to manually upload
the firmware on your satellite.
WARNING: We recommend that you always update the firmware on your satellite first,
and then update your router. Also, do not update the firmware on your router and
satellite at the same time, and do not update more than one Orbi device (router or
satellite) at a time. If you need to update more than one Orbi device, wait for the first
Orbi device to finish updating before updating your next Orbi device.
To manually update the firmware on your Orbi router and satellite, follow these
high level steps:
1.
Visit netgear.com/support
satellite.
2.
Update the firmware on your Orbi satellite.
For more information, see Manually
3.
Update the firmware on your Orbi router.
For more information, see Manually
and download the firmware for both your Orbi router and
update satellite firmware on page 98.
update router firmware on page 99.
Manually update satellite firmware We recommend that you update your
satellite’s firmware before you update the router’s firmware.
To manually update your satellite’s firmware:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
Locate and select the router firmware file you downloaded.
The firmware file name ends in .img.
7. Click the Upload button.
The firmware is updated.
Network
User Manual99Mantain and Monitor Your
Page 100
Orbi Quad-Band Mesh WiFi 6E System
Change the admin password
This feature let you change the default password that is used to log in to the router with
the user name admin. This password is not the one that you use to access the Orbi WiFi
network.
Note: Be sure to change the password for the user name admin to a secure password.
The ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
To set the password for the user name admin:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5. Type the old password, and type the new password twice.
6. To be able to reset the password, select the Enable Password Reset check box.
We recommend that you enable password reset.
7. Click the Apply button.
Your settings are saved.
Enable admin password reset
The router admin password is used to log in to your router web interface. We recommend
that you enable the password reset feature so that you can reset the password if it is
forgotten. This reset process is supported in Internet Explorer, Firefox, and Chrome
browsers but not in the Safari browser.
User Manual100Mantain and Monitor Your
Network
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.