4G WiFi M2M Router (NTC-140W-02)
Firmware Release Notes
4G WiFi M2M Router Firmware Release Notes
Copyright
Copyright© 2018 NetComm Wireless Limited. All rights reserved.
The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed,
reproduced, in any form, or by any means without prior written consent of NetComm Wireless.
Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
Please note: This document is subject to change without notice.
1.0 Initial document release
1.1 Updated for v2.0.10.4
1.2 Updated for v2.0.16.1
1.3 Updated for v2.0.16.2
1.4 Updated for v2.0.16.4
1.5 Updated for v2.0.20.3
1.6 Updated for v2.0.20.4
1.7 Updated for v2.0.23.2
1.8 Updated for v2.0.23.4
1.9 Updated for v2.0.23.5
2.0 Updated for v2.0.23.8
2.1 Updated for v2.0.23.12
2.2 Updated for v2.0.23.18
2.3 Updated for v2.0.23.22
4G WiFi M2M Router Firmware Release Notes
ntc_140wx_2.0.23.22.cdi
MD5: ea74aa3fead5a9969620a2b6d5374093
Upgrade / Downgrade instructions
Please refer to the accompanying “NTC-140W Firmware Upgrade Guide” file for details on upgrading the router firmware and
module firmware.
Release history
v2.0.23.22
New Features
None.
Enhancements
Added “Best Practices for Flash Memory Usage” section to Software Developer Kit Guide.
Merged ubi scripts (ubimount and ubisetup) from trunk.
v2.0.23.18
New Features
Added “value:LEDPowerOffTimer” to the TR-069 data model.
Enhancements
Implemented a fix for the Key Reinstallation Attack (KRACK) WPA2 WiFi vulnerability.
Improved performance of RSA key connections over an IPSec tunnel.
Updated User Guide embedded in device firmware.
v2.0.23.12
New Features
None.
Enhancements
Various security fixes to prevent unauthorized access and denial of service attacks.
Corrected WiFi LED display color when WiFi is enabled in Client mode.