NetComm Wireless 3GT1WN Users Manual

NETCOMM LIBERTY SERIES

3G Travel Router

NetComm 3G Travel Router tl 3GT1Wn

1. Gently insert the supplied battery into the battery compartment on the back of

the 3G Router.

2. Connect the supplied power adapter to a wall power outlet and to the micro
USB port of the 3G Router to charge the battery. The battery is fully charged
when the Power LED lights up Solid Green.

3. Switch the 3G Router on and wait around 2 minutes to allow the device to
power up.

1

Hardware Installation

You can use the 3G Router to create a Wireless Local Area Network (WLAN) to
provide Internet access to wireless-enabled devices.

Using the 3G Router with a 3G Mobile Broadband Internet Service

• Connect a compatible 3G USB Modem to the 3G USB port of the 3G Router.

• The 3G Router will automatically attempt to detect the connection details from

the SIM card of your 3G USB modem. Simply wait for 2 minutes to allow the
3G Router to apply the settings.

2

Connecting your device

• If the 3G APN1 connection details were successfully detected, you will now be

able to access the Internet.

Note: Please refer to the ‘Setting up your 3G Router’ section in the user guide (on the CD) if you have any problems connecting to the Internet, or if:

• Your SIM card requires a PIN code

• Your 3G broadband Internet service provider requires you to input the user name/password for your 3G connection

• You wish to use other alternate 3G connection details (such as a special APN1)

1 APN stands for Access Point Name