NetComm RTA1320V6 Specifications

KEY FEATURES
Fully featured ADSL2+ Broadband Modem for super fast Internet access
Ethernet connection
Built in Firewall for security and peace of mind
VPN Passthrough
Supports ADSL, ADSL2 and ADSL2+
UPnP™ and QoS
IPv6 ready
NETCOMM DYNALINK™ SERIES
ADSL2+ Modem Router
RTA1320V6
ADSL COM PLIANC E
ADSL
ANSI T1.413 Issue 2
ITU G.992.1 Annex A (G.dmt)
ITU G.992.2 An nex A (G.lite)
ITU G.994.1 (G.hs)
Maximum Rate: 8 Mbps dow nstream and 1 Mbps
upstrea m
ADSL2
ITU G.992.3
ITU G.992.4
Maximum Rate: 12 Mbps downs tream and 1 Mbps
upstrea m
ADSL2+
ITU G.992.5
ITU G.992.5 An nex M
Maximum Rate: 24 Mbps down stream an d 1.2 Mbps
upstrea m
ATM
PPPoA (RFC 2364) and PPPoA Bridg ed mode
PPPoE (RFC 2516) and PPPoE Brid ged mode
IPoA (RFC 2225)
Bridged mode over A AL5 (RFC2684/1483)
ATM Forum UNI 3.1 / 4.0 complian t PVCs
UBR and CBR w ith traf fic shapi ng
OAM F4/F5 loopb ack cell s
BRIDGING
IEEE 802.1d self-learni ng bridg e
Learni ng up to 4096 MAC ad dresse s
Transparen t Bridgi ng betwee n 10/100 Ethernet and US B
ROUTIN G
NAT / PAT allows m ultiple users to sha re Internet a ccess
UPnP IGD wi th NAT traversal c apabil ity
Port For wardin g: users ca n setup mult iple vir tual se rvers
(e.g., Web, FTP, Mail servers) on the local networ k.
Static rou ting & dyna mic routi ng RIPv1/v2
DNS Relay, Dyn amic DNS
DHCP Cli ent/Re lay/Ser ver
IGMP Prox y
Suppor t IP/Brid ge QoS for dif ferent t raffic cl asses
Suppor t reser vation of ba ndwid th to guarante e voice
qualit y of VoIP appli cation s.
SUPPORTED APPLICATIO NS
Applic ation Leve l Gateways pre set for Auth /Ident, DN S,
FTP, PPTP, IPSEC, POP3, SMTP, SSH, TELNET, TFTP & WEB servers. Multiple Vir tual Se rvers c an be setup i n local networ k.
VPN passt hrough: PPT P & IPSEC.
NetMeeti ng, MSN Mes senge r, FTP, Quick Time, mIRC,
Real Playe r, CuSeeMe, on line gam ing.
SECURI TY
PAP, CHAP, and MS-CH AP for PPP auth enticati on
Firewal l based on in coming & ou tgoing fil tering of IP
addres s/Por t number/Pro tocol typ e.
Ping bloc king fro m WAN.
DMZ hosti ng.
CONFIGURATION AN D MANAGEM ENT
Embedd ed web confi guratio n interface with pas sword
protectio n
Remote man ageme nt control
Telnet sessi on for loca l or remote manageme nt
System even ts loggin g
DSL conn ection di agnosti cs
Firmwar e upgrade v ia web browse r
User set ting back up & restore
HARDWAR E INTERFACE
One RJ-11 port for ADSL con nectio n
One Ether net port fo r IEEE 802.3/802.3u 10/100 Base -T
auto-sensing, auto c ross-ove r.
One hidd en reset bu tton for resto ring facto ry default
settin gs
CHIPSE T
Broadco m BCM6332 s ingle- chip ADS L2+.
4MB Flash /16MB SDRAM
REGUL ATORY APPROVAL AND CO MPLIAN CE
ACA, Teleperm it
POWER REQ UIREME NT AND OPER ATION
ENVIRO NMENT R EQUIREM ENT
Power Adaptor : Output 12 VDC, 0.5A
Power Cons umption: le ss than 5 W
Ambie nt Temperature: 0 to 40°C
Relativ e Humidit y: 20% to 90% (non- conden sing)
PHYSICAL
Front Panel: 4 LED Indicato rs - Power, ADSL, PPP,
Ethernet
Dimensions: 88m m(L) x 105mm( W) x 20mm (H)
Weight: 58g
TECHNICAL SPECIFICATIONS
NETCOMM DYNALINK™ SERIES
ADSL2+ Modem Router
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the actual product.
The Dynalink RTA1320V6 ADSL2+ Modem Router is capable of delivering high-speed internet
access. With speeds of up to 24Mbps* watching movies, downloading music and online gaming
becomes second nature with this powerful but compact device.
With all the features you expect from a quality modem/router the
ADSL2+ Modem Router
comes
with a NAT firewall and QoS making it suitable for any use that requires prioritisation such as online
gaming or VoIP.
The ADSL2+ Modem Router comes with a single Ethernet port for connecting to existing networks.
The ADSL2+ Modem Router is also Windows 7 compatible, making it the perfect choice if you’re
looking for a modem that will work with the new OS.
The RTA1320V6 ADSL2+ Modem Router is IPv6 ready. Future proof yourself by making sure your
device will support the new protocol when the Internet switches to IPv6 addresses.
* Please note that actual speeds may differ and are dependent on your ISP
Telephone
Wall Socket
Power
Point
Power Adapter
Computer
DYNALINK
Head Office – 12c Te Kea Place, Albany Auckland, New Zealand
P: +64 9 448 5548 F: +64 9 448 5549 E: sales@dynalink.co.nz W: www.dynalink.co.nz
NETCOMM LIMITED PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au
W: www.netcomm.com.au
ABN 85 002 490 486
Loading...