NetComm Poe01, POE04, POE08 User Manual
NETCOM POE
REMOTE POWER SUPPLY ETHERNET SWITCH
USER'S MANUAL
NETCOM PO E Switch User’s Manual
2
PREFACE
Version directions:
This manual corresponds to NETCOM POE series versionV1.1.
NETCOM PSE NETCOM POE Series
1. NETCOM POE01
2 .NETCOM POE04
3. NETCOM POE08
Target reader
The reader of this manual is NETCOM POE series users
Related Manuals
This manual explores "Installation Manual" of NETCOM POE series
Article structure
List the basic content of the manual, including the name and main purpose
of Chapters.
Chapter 1 System Overview
Describes NETCOM POE features
Chapter2 Structure of electrical connections
Describes the appearance and pin definitions of NETCOM POE
Chapter3 Installation and commissioning
Describes installation and commissioning of NETCOM POE
Chapter4 Routine maintenance
Describes maintenance of NETCOM POE series
Chapter5 Transport storage
Describes the transport issue of NETCOM POE series
3
CONTENTS
Chapter 1 System Overview. ................................................................................. 4
1.1 Features and functions ............................................................................ 4
1.2 Technical features and Specifications ...................................................... 6
Chapter 2 Electrical connection and structure. ....................................................... 9
2.1 The structure and outline picture of NETCOM POE8 ............................ 9
2.2 Display and control panel .................................................................... 12
Chapter 3 installation and debugging ................................................................. 15
3.1 Open case inspection ............................................................................. 15
3.2 Installation ............................................................................................ 15
3.3 Start test ............................................................................................... 16
Chapter 4 Routine maintenance .. ................................................................... 17
4.1 Routine maintenance ............................................................................. 17
Chapter 5 Transport and storage.. ................................................................... 18
5.1 Transport ................................................................ ............................ 188
5.2 Storage ................................................................................................. 18
4
Chapter 1 System Overview
Content
Features and functions
Operating environment
Technical features and parameters
This chapter describes features and functions of NETCOM POE series
1.1 Features and functions
NETCOM POE which is designed specifically for Telecom carrier . The
device implemented advanced MCU control technology. Total power,
individual port power, port status and device temperature are displayed on LCD
real time. And it has efficient protection of each port. It is used with wireless
AP, IP cameras, VOIP and other device that needs network and power supply.
1. LCD display and control panel, display the total power, power of each port,
the device temperature, etc. ( only for 8 port POE)
2. The entire device or any single port reset ( only for 8 port POE)
3. The POE and UPLINK port support automatic MDI/MDI-X function
4. Supply 4 or 8 POE power port, one UPLINK port
5. 10/100Mbps, full/half duplex automatic adapt
6. Compliant with IEEE802.3af, IEEE802.3at standard, 25W Max per port
7. Backplane switching capacity of 1.0Gbps
8. 2K MAC address list
5
9. Extend the cable transmit distance, furthest to 300m. ( only for 4 port POE)
10. Effective short circuit, overload and total power protection
11. Each port with indicator light, alarm light, device alarm light
12. Metal case, with wall mounting hole
6
1.2 Technical features and Specifications
Technology Specifications
IEEE standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af Power Over Ethernet
IEEE 802.3at Power Over Ethernet
switching structure
Back-plane( switch ):1.0Gbps
Transfer Rate: 14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Transmit rate
Ethernet ：10Mbps half duplex，20Mbps full duplex
Fast Ethernet：100Mbps half duplex，200Mbps full duplex
Mac address
2K MAC address list
interface
10/100TX：RJ-45，all ports support automatic
MDI/MDI-Xfunction
4 port POE or 8 port POE
Port protection
Effective short circut ,overload and total power
protection
Cable type and
distance
10BASE-T：
CAT 3，4，5 UTP （maximum length 100m ）
EIA/TIA-568 100 OHM STP（maximum length 100m）
100BASE-TX：
CAT 5E UTP（maximum length 100m）
EIA/TIA-568 100 OHM STP （maximum length 100m）
Loading...