NetComm NTC-140W Quick Start Manual

Quick Start Guide

4G WiFi M2M Router

NTC-140W Series

| Wireless M2M

2

| Wireless M2M

3

NTC-140W Series - 4G WiFi M2M Router

Quick start guide

This quick start guide is designed to get you up and running quickly with your new

NTC-140W Series router. More advanced set up instructions are provided in the
user guide which can be opened by clicking on the Help tab on the Web-UI, or
can be downloaded from

http://www.netcommwireless.com/product/m2m/ntc-140w

Package contents

All NTC-140W packages include:

1 x NetComm Wireless NTC-140W Series router

2 x Cellular antennas

2 x WiFi antennas

1 x 1.5m Black Ethernet cable

1 x DIN rail mounting bracket

1 x Quick start guide

1 x Power supply cable with tted Molex connector

1 x WiFi security card

| Wireless M2M

4

-

i

I/O

GPS

USB

LAN LAN/WAN

WiFi

Cellular Main

SIM

µSD

Cellular AUX

WiFi

+

Device overview

ITEM DESCRIPTION

1 SIM card slot Insert SIM card here.

2 Cellular Main SMA female connector for Cellular antennas.

3 MicroSD card slot Insert a MicroSD card here to provide additional storage

(Optional).

4 GPS antenna connector SMA female connector for GPS antenna.

5 Cellular AUX SMA female connector for Cellular antennas.

6 WiFi antenna connectors Reverse polarity SMA female connectors for

WiFi antennas.

3

2

1

6

4

5

| Wireless M2M

5

NTC-140W Series - 4G WiFi M2M Router

ITEM DESCRIPTION

1 Micro USB 2.0

OTG port

Provides connectivity for optional external storage or a USB Ethernet
dongle. Supplies up to 0.5A to connected device.

2 Reset button Press and hold for less than 5 seconds to reboot to normal mode.

The LEDs are green and extinguish in sequence to indicate that the
router will reboot normally if the button is released during this period.

Press and hold for 5 to 15 seconds to reboot to recovery mode.
The LEDs are amber and extinguish in sequence to indicate that the
router will reboot to recovery mode if the button is released during
this period.

Press and hold for 15 to 20 seconds to reset the router to factory
default settings. The LEDs are red and extinguish in sequence to
indicate that the router will reset to factory default settings if the
button is released during this period.

3 Molex Mini-Fit™

receptacle

Connect the provided power supply here. The Molex receptacle
provides:

• Ground (−)

• Power (+)

• I/O terminal

• (i) ignition input detection terminal.

4 LAN port LAN port for wired Ethernet clients.

5 LAN/WAN port LAN or WAN port for wired Ethernet clients or to bridge another

network connection.

-

i

I/O

USB

LAN LAN/WAN

+

1

2

5

3

4

| Wireless M2M

6

Overview of LED indicators

LED

ICON

NAME

COLOR

STATE DESCRIPTION

Power

Off Power off

Double ash Powering up

On Power on

On Power on in recovery mode

Slow ashing Hardware error, such as SIM not inserted.

WiFi

Off Radio Off

On WiFi Access Point is enabled

Blinking1 Trafc via WiFi

On

WiFi Client mode is enabled, WiFi Access
Point mode is disabled

Blinking1 Trafc via WiFi in client mode

Network

Off Radio Off

On Connected via WWAN

Blinking1 Trafc via WWAN

Slow ashing Connecting PDP

On Registered on Network

Slow ashing Registering network

Slow ashing SIM PIN locked

Fast ashing SIM PUK locked

On Can’t connect

Signal
strength

On LTE signal

On WCDMA signal

On GSM signal

1 The term “blinking” means that the LED may pulse, with the intervals that the LED is on and off not being equal.

The term “ashing” means that the LED turns on and off at equal intervals.