NetComm NSCS01, NSCS04 Specifications

Start reaping the benefits of the digital world with a NetComm Security Camera Server!
A NetComm Security Camera Server is an advanced digital surveillance device that converts standard analogue Closed Circuit TV

(CCTV) camera images to digital for viewing over a LAN, Intranet or the Internet. This enables users to view live images from a
Web browser on any networked computer, anywhere and at any time.

NetComm Security Camera Servers have a built-in web and FTP server and are easily configured using the Web-based interface.
They also feature an image compression chipset (capable of delivering standard JPEG, MJPEG, and real-time video) to distribute
monitored images on to the network.

Going digital means better images quality and storage capability i.e. on a hard disk at any location. There is no need to buy video
tapes, change video tapes or service the video recorder.

Models currently available include NSCS01 and NSCS 04 (capable of connecting 1 analogue video source) and (capable of
connecting 4 analogue video sources).

Access Real-time Video Remotely

NetComm Security Camera Servers enable remote viewing of video in real-time on a local area network or the Internet. These
images can be accessed anywhere and at anytime, eliminating the need for dedicated security monitors at a central office.
Images from an alarm event could be easily and quickly distributed via computer networks to many people in different locations.

Integrates Easily with Existing Network Infrastructure

NetComm Security Camera Servers utilise existing analogue surveillance systems and network IP infrastructure. This means
reduced installation and migration costs - all the equipment you need is already there.

Simple to Install and Use

Using the web-based interface, NetComm Security Camera Servers are easy to install and use. Simply plug an analogue camera
into the server and images can be transmitted via a LAN, ADSL modem, wireless network adapter or mobile phone. All that is
needed on the receiving end is a networked computer with a Web browser.

NetComm Limited ABN 85 002 490 486 2-6 Orion Road, LANE COVE, NSW, 2066
phone [phone] • fax [phone] • email [e-mail]
www.netcomm.com.au

Features

> High quality, Motion JPEG video at up to 25 frames per

second

> 3-layer user Security Control to prevent unauthorized

access

> Built-in Motion Detection with Date/Time stamp and

GPIO Input for event triggers.

> 4 configurable alarm inputs and 1 relay output for

external devices

> Programmable event script for various applications such

as motion detection and alert notification

SECURITY CAMERA SERVERSSECURITY CAMERA SERVERS

SECURITY CAMERA SERVERSSECURITY CAMERA SERVERS

SECURITY CAMERA SERVERS

> Provides multiple event trigger notification via e-mail,

TCP and HTTP, and video uploading via e-mail, FTP
and HTTP

> Supports dynamic DDNS to easily locate the camera

on the network

> Active-X control for Internet Explorer tm providing

maximum performance

> Max resolution of up to 704 x 576

> Remotely upgrade firmware and user content pages

via FTP

NetComm is Australia’s dynamic data communications and
networking solutions provider. For more information on this
and other NetComm products, please visit
www.netcomm.com.au

NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia.
Phone [phone] • Fax [phone]
www.netcomm.com.au • Email [e-mail]
Trademarks and registered trademarks are the property of NetComm Limited

or their respective owners. Specifications are subject to change without
notice. Images shown may vary slightly from the product.

Your NetComm dealer:

3 Year Warranty*

1 year warranty out of the box. Extra 2 years FREE with

online registration at www.netcomm.com.au
*Conditional on registration online.

Technical Specifications

> Video Input: 1.0V(P-P), Composite, BNC,

Auto detection NTSC/PAL
NSCS04 4 Channels;
NSCS01 1 Channels

> Hardware: 32 Bits RISC Processor

2M Bytes Flash ROM; 16M Bytes
SDRAM

One RS-485 COM port; One RJ-45
for Ethernet

Two LED's (network and power/
system status)

RS-485 GPIO - four alarm inputs and
one relay output

> Network Interface: Ethernet (10 Base-T)
> Image Compression: JPEG; Motion JPEG;
> Video Adjustment: Brightness, Contrast, Hue,

Saturation, Quality Level for
individual video channel

> Protocols: TCP/UDP/IP, ARP, ICMP, HTTP, FTP,

Telnet, SMTP, DHCP, PPP

> Security: Three-layer Password Protection
> Max. Resolution:NTSC: 704x480(Single),

352x240(Quad)
PAL: 704x576(Single),

352x288(Quad)

> Performance: Video throughput: Up to 25 frames/

second
Network throughput: Max. Up to

800K bytes/second

> Event Trigger & Action: Programmable Event Script

with Wizard supported.

> Trigger: Includes Time (Frequency)/GPIO

Input/Motion Detection/Video/
Network Connection/CGI.

> Action: Store image to internal buffer; FTP

image to remote site; E-mail image to
specified account; HTTP server push
to remote site; relay output to control
external devices; etc.

> Installation: Assign IP address using ARP, Admin

Web Page or IP Installer

> Software Upgrade: Local or Remote software up-

gradable using FTP; Custom web
contents updated via FTP & Telnet

> System Requirements: Standard browser such as

Microsoft IE4.x or 5.x or above, and
Netscape Navigator 4.x running on
Win95/98/NT, Linux, etc.

> Operating Temp: 5 ~50 degrees Celsius
> Operating Humidity: 20 ~80 %
> Input Voltage: AC9V, 1A or DC 10 ~24V, 1A
> Power Consumption: <10 watts
> Dimension : 77 (W) X 54(H) X 194 (L) mm
> Weight: 1.1kg,excluding power supply