NetComm NP505, NP505F Quick Start Manual

500Mbps Powerline Adapters with AC Pass-through - NP505

NetCommWireless

500Mbps Powerline Adapters

with AC Pass-through

QUICK START GUIDE

NP505/

NP505F

NetComm

Wireless

NetComm

Wireless

This quick start guide is designed to get you up and running quickly

with your new device. More advanced set up instructions can be found

in the user manual which can be downloaded from

www.netcommwireless.com

SETTING UP YOUR POWERLINE
ADAPTERS

1 2

3

Router

1. Using one of the supplied Ethernet cables connect one end into the

LAN Ethernet port of your modem/router.

2. Connect the other end of the same cable into one of the

Powerline adapters.

3. Connect the Powerline adapter to a power point near your

modem/router.

NOTE: For best performance plug your Powerline adapters directly into the wall.

Only connect to a powerboard as a last resort as this will reduce performance.

500Mbps Powerline Adapters with AC Pass-through - NP505

4. Connect one end of the other supplied Ethernet cable into the

Ethernet port of any device you want to connect to the Internet (PC,
set-top box, gaming console, PVR, blu-ray player etc).

5. Connect the other end of the cable into the second Powerline adapter.

6. Connect the Powerline adapter to a power point near your device.

NOTE: For best performance plug your Powerline adapters directly into the wall.

Only connect to a powerboard as a last resort as this will reduce performance.

TV

Powerboard

At this point, you can plug another electrical appliance into the Powerline

adapter’s AC pass-through socket if you wish to do so.

Both adapters will take a short time to nd each other. Once they have, all

three lights on both adapters should be on.

NOTE: For best performance connect other electrical devices to the AC Pass-

through socket of the Powerline adapter. If possible, also avoid plugging
other electrical devices into the socket next to the Powerline adapter to
ensure your network performs to its full potential.