NetComm NP2008HS Specifications

Page 1
networking
Build or extend your network with ease
Build or extend a local Ethernet network with this Plug & Play network switch
for Windows®95/98/2000/ME/XP, Linux and MacOS 8/9/X
Automatically detects and sets the optimum data rate
8-Port SmartSwitch
8 x 10/100Mbps
Ethernet Ports
10/100Mbps AUTO-NEGOTIATION ETHERNET SWITCH
NP2008HS
NETCOMM LIMITED ABN 85 002 490 486 2-6 Orion Road, LANE COVE, NSW, 2066 phone 02 9424 2070 fax 02 9424 2010 email sales@netcomm.com.au
www.netcomm.com.au
8 x 10/100Mbps Auto-Negotiation Ethernet ports
• Simple Plug & Play
• Automatically detects and sets optimum data rate
• Store & Forward switching method
• Windows® 95/98/2000/Me/XP, Linux, MacOS 8/9/X
• Supports Auto-MDI/MDI-X
• Full/half duplex transfer mode for each port
• Wire speed reception and transmission
• Integrated address Look-Up Engine, supports 1K absolute MAC addresses
• Physical layer port Polarity Detection and Correction function
• Comprehensive front-panel diagnostic LEDs
• IEEE 802.3x flow control for full-duplex
• Back pressure flow control for half-duplex
KEY FEATURES
8-Port SmartSwitch
Page 2
8-Port SmartSwitch
NP2008HS
8-Port SmartSwitch
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the product.
Technical Specifications
Package Contents
Your Netcomm dealer:
NetComm is Australia’s dynamic data communications and networking solutions provider. For more information on this and
other NetComm products, please visit www.netcomm.com.au
NetComm Limited ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia.
PHONE (02) 9424 2070 FAX (02) 9424 2010 www.netcomm.com.au EMAIL sales@netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the product.
SPECIFICATIONS
Filtering Address Table 1K entries per device
Power Adaptor 7.5VDC/1A
Power Consumption 2.8 watts (max.)
Dimensions 125 (w) x 70 (d) x 30 (h)
Temperature
OPERATING
: 0 ~ 40C
STORAGE
: -10 ~ 70C
Humidity
OPERATING: 10% ~ 90% RH
STORAGE: 5% ~ 90% RH
Emission
FCC Class B, CE mark Class B, VCCI-B. C-Tick (N367)
SPECIFICATIONS
Standard
IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX
Network Media
ETHERNET: UTP Cat. 3,4,5
EAST ETHERNET: UTP Cat. 5
Protocol CSMA/CD
Topology Star
Number of Ports
8 x 10/100Mbps Auto-MDIX with RJ-45 connector
Network Data Transfer Rate
ETHERNET
: 10Mbps (
HALF
-DUPLEX)
20Mbps (
FULL-DUPLEX)
FAST ETHERNET: 100Mbps (HALF-DUPLEX)
200Mbps (
FULL-DUPLEX)
Diagnostic LEDs
PER UNIT
: Power(1 Green LED)
PER PORT: Link/Activity SPEED:(100Mbps)
NetComm NP2008HS 8-Port SmartSwitch
Power Pack
N367
PACKAGE CONTENTS
1 YEAR
WARR ANT Y
CONDITIONS APPLY
Loading...