NetComm IG1000 User Manual

THE SIMPLEST, MOST COST-EFFECTIVE EMBEDDED MODEM – WITH SEPARATE DEVELOPER’S KIT

EMBE DDE D V.92 MODE M T E C H NO LOGY

IND U STRIAL MODEM & DE VE LOPERS K I T

NetComm Limited ABN 85 002 490 486

PO Box 1200, Lane Cove NSW 2066 Australia. PHONE [phone] • FAX [phone] • EMAIL [e-mail] • www.netcomm.com.au

Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are subject to change without notice. Images shown may vary slightly from the product.

BENEFITS

• Greatly reduced approval time and costs

• Simply provide for the pinouts in your design

• Logging Data real time vs onsite time

• Low cost management and support

• Low cost networking

• End user accessibility and add-on service possibilities

Key Specifications

• V.92 – upstream rates up to 48Kbps, QuickConnect, and Modem­on-Hold functions

• V.92, V.90, V.34, V.32bis, V.32, V.22 bis, V.22, V.23, and V.21;

• V.22 bis Fast Connect

• Bell 212A and Bell 103

• 2-wire Leased Line

• TAM support

• Fax Class 1 & 2

• External flash ROM includes default values for 29 countries

• Flash upgradable

• Caller ID

• Small design (25mm x 65mm)

• Extensive AT command set

• Designed in Australia

• Local Support

• Local and International Approvals: A-Tick, CB Certified,
EN55022 Class B, FCC Part 15 Class B

The IG1000 is the first uniquely Australian developed modem
that offers designers a space efficient communications module
suitable for any data transfer application.

NetComm’s IG1000 enables OEM’s to integrate a variety of modem
functions with the benefit of accessing real time data, low cost
management/support, plus add-on service possibilities.

International EMC and safety standards have been tested and
certified, bringing the integration cost down for approval ratings
on the finished product. Structured to fit into a generic industry
footprint, this Conexant chipset product brings with it all the
capabilities of a full hardware modem.

This product can be integrated into any device that requires data
transfer via a PSTN connection, incorporating the latest V.92
technology to give your product the benefit of high upstream
speeds (up to 48Kbps).

The separate IG1000 TEST 5V Developer’s Kit includes:

• Board with footprint socket

• 9-pin serial interface connector

• Power input socket

• PSTN (telephone) socket

IND U STRIAL MODEM & DE VE LOPERS K I T

EMBE DDE D V.92 MODE M T E C H NO LOGY

SPECIFICATIONS

• ITU-T V.92 with PCM upstream rates up to 48 kbps, QuickConnect, and
Modem-on-hold functions

• V.92, V.90, V.34, V.32bis, V.32, V.22 bis, V.22, V.23, and V.21; Bell 212A

and Bell 103

• MNP 10EC(tm) enhanced cellular performance

• V.250 and V.251 commands

• V.22 bis fast connect

• Data compression and error correction

• V.44 data compression for optimal downloading of Internet Web pages
and files

• V.42 bis and MNP 5 data compression

• V.42 LAPM and MNP 2-4 error correction

• Fax modem

• V.17, V.29, V.27 ter, and V.21 channel 2

• EIA/TIA 578 Class 1 and T.31 Class 1.0 commands

• V.80 synchronous access mode supports host-controlled
communication protocols with H.324 interface support

• Upgradeable Flash ROM

• Data/Fax/Voice call discrimination

• Hardware-based modem controller and digital signal processor (DSP)

• Worldwide operation

• Call progress, blacklisting

• External flash ROM includes default values for 29 countries

• Distinctive ring detect

• Caller ID detect

• Off-hook Call Waiting Caller ID detection during data mode in V.92,
V.90, V.34, V.32bis, or V.32

• Telephony/TAM

• Leased Line Functionality

• V.253 commands

• 2-bit and 4-bit Conexant ADPCM, 8-bit linear PCM, and 4-bit IMA
coding

• 8 kHz sample rate

• Concurrent DTMF, ring, and Caller ID detection

• Built-in host/DTE interface with speeds up to 230.4 kbps

• Direct mode.

• Flow control and speed buffering.

• Automatic format/speed sensing.

• Serial async TTL interface, supports speeds up to 230.4 Kbps

• Industry standard pin outs

• +5V or optional +3.3V operation with +5V tolerant digital inputs.

• Typical power consumption 190mA @5V (Operating on-line), 30mA
(Sleep Mode).

• Size 65.6 X 26.6mm, height off base PCB 17mm

APPLICATIONS & MARKETS

The IG1000 offers a complete communications solution

and is suitable for real time data capture in:

• meter reading

• ticketing

• vending

• point-of-sale

• EFTPOS terminals

• satellite network integrators

• mining

• engineering

• industrial waste

• plant and equipment

• office machinery

• security

• rural

• utilities

• vending

• refrigeration

• air conditioning

• home automation.

Module Product Code: IG1000C50AU

Development Kit Product Code: IG1000 TEST 5V

NetComm Limited ABN 85 002 490 486

PO Box 1200, Lane Cove NSW 2066 Australia.

PHONE [phone] • FAX [phone]
EMAIL [e-mail] • www.netcomm.com.au

Trademarks and registered trademarks are the property of NetComm Ltd or their respective owners.

Specifications are subject to change without notice. Images shown may vary slightly from the product.

Your Netcomm dealer:

1 YEAR

WARRANTY

Conditions apply