■ Video support V.80 for H.324 (videophone) compatibility
■ Supports Digital Line Protection, Voice Capable (TAM), Speakerphone, Distinctive
Ring (duet) and Caller Id.
■ Flash ROM Upgradeable
■ Hayes AT and extended AT command set compatibility
Note: To achieve a 56Kbps V.92 connection and utilise the other V.92
features - such as Caller ID & Distinctive Ring, - these features
must be enabled on your phone line and your ISP must support and
enable the V.92 Standard. If a V.92 connection is not available, this
product will revert to a 56K V.90 mode.
www.netcomm.com.auRev.1 - YML658
Page 4AM5698 Roadster V.92 User Guide
Installing your Modem
Before beginning, please turn your computer off.
■ Connect the serial port on the back of the modem (marked SERIAL) to a COM port
on your PC using the serial cable.
■ Connect the power pack to a power point and connect the other end to the modem
power socket (marked POWER).
■ Connect the telephone cord to the line socket on the back of the modem (marked
LINE) and the other end to a phone socket.
■ Turn on your modem. Refer to the Multiple Operational Features following to
prepare for speakerphone functionality.
■ Turn on your computer and refer to the appropriate operating system in Installing
your Drivers to continue.
Rev.1 - YML658www.netcomm.com.au
AM5698 Roadster V.92 User GuidePage 5
Speakerphone
There are three ways to use your speakerphone modem:
1. Use the inbuilt speakerphone functions, such as microphone an speaker.
2. Plug in a headset and boom microphone for easy hands free communication.
3 Use your computer's external speaker, sound card and sound card cable to enhance
video conferencing.
Note: The Headset is available as an
optional extra.
www.netcomm.com.auRev.1 - YML658
Page 6AM5698 Roadster V.92 User Guide
Installing your Drivers
Windows XP
1. Please insert the supplied NetComm
CD, and when the "Found New
Hardware Wizard" recognizes the new
"NetComm V.92 Modem", select
"Install from a list or specific location
(Advanced)" and then click "Next>".
2. Select "Search for the best driver in
these locations" and choose "Include
this location in the search:". Type in
"D:\DRIVERS\AM5698" (where d:\ is
the letter of your CD ROM drive) and
click on "Next>".
3. The Wizard will search for the correct
driver. The drivers that Windows XP
uses are not digitally signed by
Microsoft and the message to the
right will be displayed. Click
"Continue Anyway".
4. Windows XP will now copy the
required files.
5. Once all files have been copied click
"Finish".
Note: After modem installation
has completed the Wave
Device for Voice modem
will be installed without
your intervention.
Rev.1 - YML658www.netcomm.com.au
AM5698 Roadster V.92 User GuidePage 7
Windows 2000
1. Please insert the supplied NetComm
CD, and when the "Found New
Hardware Wizard" starts. Click on
"Next>".
2. Select "Search for a suitable driver for
my device (recommended)" and click
on "Next>".
3. Select "Specify a location" and click
on Next>".
4. Enter the driver location
"D:\DRIVERS\AM5698" (where D:\ is
the drive letter of your CD ROM
drive) and click on "OK".
www.netcomm.com.auRev.1 - YML658
Page 8AM5698 Roadster V.92 User Guide
5. Windows will locate the correct driver.
Click on "Next>" to continue.
6. Windows 2000 will now copy the
driver files.
7. Once the files have been copied click
"Finish" to complete installation of
the NetComm V.92 Modem.
Note: After modem installation
has completed the Wave
Device for Voice modem
will be installed without
your intervention.
Rev.1 - YML658www.netcomm.com.au
AM5698 Roadster V.92 User GuidePage 9
Windows Me
1. Please insert the supplied NetComm
CD, and when the "Add New
Hardware Wizard" recognizes the new
"NetComm V.92 Modem", select
"Specify the location of the driver
(Advanced)" and then click "Next>".
2. Select "Search for the best driver in
these locations" and choose "Specify
a location:". Type in
"D:\DRIVERS\AM5698" (where d:\ is
the letter of your CD ROM drive) and
click on "Next>".
3. Windows will confirm the driver and
location. Click on "Next>" to
continue.
4. Click on "Finish" to complete
installation of the NetComm V.92
modem.
Note: After modem installation
has completed the Wave
Device for Voice modem
will be installed without
your intervention.
www.netcomm.com.auRev.1 - YML658
Page 10AM5698 Roadster V.92 User Guide
Windows 98
1. Please insert the supplied NetComm
CD, and when the "Add New
Hardware Wizard" recognizes the new
"NetComm V.92 Modem", click on
"Next>".
2. Select "Search for the best driver for
your device (Recommended)" and
click on "Next>".
3. Select "Specify a location:". Type in
"D:\DRIVERS\AM5698\" (where d:\ is
the letter of your CD ROM drive) and
click on "Next>".
4. Windows will confirm the driver and
location. Click on "Next>".
5. The required files will then be copied
to your computer.
Rev.1 - YML658www.netcomm.com.au
AM5698 Roadster V.92 User GuidePage 11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.