NetComm 3G22WV Quick Install Guide

NETCOMM LIBERTY™ SERIES

HSPA+ WiFi Router
with Voice

3G22WV Quick Start Guide

This router has been designed to be placed on a desktop. All of the cables exit from the rear

for better organization. The LED indicator display is visible on the front of the gateway to

provide you with information about network activity and the device status.

ICON NAME ICON DESCRIPTION

Signal Strength
(high, medium, low)

Signal

WWW

Indicates the mobile broadband signal strength

Lights up with an active mobile broadband connection

Lights up when an Internet connection is established (3G or WAN)

Phone

LAN 2-4

LAN/WAN

WiFi

Power

Solid light when phone is off the hook and ashes with incoming call

Lights up when a device is plugged into one of the LAN ports

Lights up when a device is plugged into the LAN/WAN port

Lights up when WiFi is enabled

Lights up when the router is powered on

REAR PANEL DESCRIPTION

1 SIM slot

2 Antenna Connectors

3 LAN ports

4 LAN/WAN port

5 Voice

6 Power

7 Reset button

8 USB Ports

Slot for entering the SIM card.

Antenna connectors for optional attachment of high gain external antennas

RJ-45 LAN ports for wired Ethernet clients (computers, laptops, etc)

RJ-45 LAN/WAN port for wired Ethernet clients (LAN) or alternative Internet
connection to ADSL/Cable/Fibre (WAN)

Phone port to enable connection to a standard analog telephone

Power connector, connects to a DC 12V 1.5A Power Adapter

Using a paper clip, hold this button down for more than 10 seconds to reset
to factory defaults.

Connect a USB printer or mass storage hard drive to network and share with
connected users

2

1

3

4

5

6

7

8