Netbotz NBWL0456A User Manual

NetBotz® 355/455 Installation and
Quick Configuration Manual —
Addendum

When installing your NetBotz Room
Monitor 355 or NetBotz Room Monitor 455, use the
information included with this addendum while fol­lowing the instructions in your installation manual.

Connect the NetBotz 355 or NetBotz 455 to
Your Network

Power-over-Ethernet (PoE) injector

Power over Ethernet describes a system to transfer
electrical power, along with data, to remote devices
over standard twisted-pair cable in an Ethernet net­work. The IEEE standard 802.3 for supplying power
over Ethernet allows the device providing power to
use a voltage between 36–57 V DC. The nominal
voltage is 48 V with a current of
10–400 mA, subject to a maximum load power of

15.40 Watts. PoE+ can provide up to 24 Watts of
power.

NOTICE: Power provided to the NetBotz 355 or
NetBotz 455 must be from a limited power source.
To avoid overloading the circuit, before you ener­gize the NetBotz appliance, review the electrical
specifications in the installation and quick configu­ration manual.

Customer support and warranty information is available at the APC web
site, www.apc.com.

© 2017 Schneider Electric. All Rights Reserved. Schneider Electric,
APC, the APC logo, and NetBotz are trademarks owned by Schneider
Electric Industries SAS or its affiliated companies.

990-3491A

05/2017