Netbotz NBES0312 User Manual

NetBotz® Door Switch Sensor for Third-Party Racks

(NBES0312)—Installation Instructions

Inventory

Door switch sensor with

1.57-m (62-in) cable

203-mm (8-in) tie wrap (10)

Installation

Caution: Make sure you connect this sensor to a Sensor port on applicable NetBotz

products. See your NetBotz product documentation for details.

Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the

RJ-45 coupling and standard CAT-5 cabling.

#4 x 1/2-in screw (4)

Adhesive cable tie holder (5) RJ-45 coupling

63.5-mm (2.5-in) dual
adhesive tape (2)

Note: Use adhesive cable tie holders and tie wraps to secure the sensor cable.

Rack door-mounting option

6 mm (1/4 in) or less

Customer support and warranty information is available at the APC Web site, www.apc.com.

© 2011 Schneider Electric. All rights reserved. All Schneider Electric trademarks are property of
Schneider Electric S.A.S or its subsidiaries. Other trademarks are property of their respective owners.

990-4590

9/2011