Netbotz NBES0311 User Manual

NetBotz® Temperature Sensor
(NBES0311) Installation Instructions

Inventory

0.81-m (32-in) temperature sensor (1)

Installation

Caution: To avoid damaging the sensor, do not use a tie wrap or wire clip directly on the

sensor when securing it. Use a tie wrap or wire clip, as shown in these instructions, about
half an inch from the end of the sensor.

Note: Use adhesive cable tie holders, tie wraps, and wire clips to secure the sensor cable.

Door

203-mm (8-in) tie wrap (5)

19-mm x 19-mm (3/4-in x 3/4-in)

adhesive cable tie holder (3)

Wire clip (4)

Customer support and warranty information is available at the APC Web site, www.apc.com.

© 2011 Schneider Electric. All rights reserved. All Schneider Electric trademarks are property of
Schneider Electric S.A.S or its affiliates. Other trademarks are property of their respective owners.

990-4588

9/2011