Netbotz NBES0302 User Manual

NetBotz® Door Switch Sensor for Rooms or Third­Party Racks (NBES0302)—Installation Instructions

Inventory

Door s w itch se nsor wit h

15.24-m (50-ft) cable (1)

203-mm (8-in) tie wrap (20)

Installation

Caution: Make sure you connect this sensor to a Sensor port on applicable NetBot z

products. See your NetBotz product documentation for details.

Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the
RJ-45 coupling and standard CAT-5 cabling.

#4 x 1/2-in screw (4) 63.5-mm (2.5-in) dual

adhesive tape (2)

Adhesive cable tie holder (10) RJ-45 coupling (1)

Note: Use adhesive cable tie holders and tie wraps to secure the sensor cable.

Room door-mounti ng option

6 mm (1/4 in ) o r le s s

6 mm (1/4 in) or le s s

Rack door-mounting option

Customer support and warranty information is available at the APC Web site, www.apc.com.

© 2008 Americ an Power Conversion. All rights reserved. All AP C trademarks are property of

American Power Conversion. Other trademarks are property of their respective owners.

990-3378A

10/2008

*990-3378A*