Neptune L-1-300, L-1-BK, L-1-CL Assembly Manual

Assembly Instructions

(3) Insert the shaft and propeller assembly into the coupling.
Tighten the setscrew.

3/8-16 HEX NUT

(1) Assemble Mixer as per the drawings. Make sure all hardware
is tight.

(2) Attach the coupling (Part # 3) to the air motor shaft (Part #1)

SHAFT ASS'Y. 5/16" DIA. X 30" LG. & 3" PROP.

PIVOT BOLT

MOUNTING BRACKET ASSEMBLY

CLAMP BODY ASSEMBLY

8

7

6

5

ITEM

NO.

#8-32 KEP NUT

MIXER MOTOR

4

2

1

DESCRIPTION

1

000528

1

1
1

000529

100642

002092

L-1-CL 24

100783

000967

1

1

1

1
1

1

1

4

QTY.

001073

-

-

-

-

-

003129

-

L-1-CL

100783
101221
000967

MIXER MODELS

(4) Always wear safety goggles when operating the mixer.

(3) Do not attempt to remove the mixing container or mixer when
mixer is operating, as this could result in personal injury or
damage to the mixer.

(2) Be certain propeller is not touching bottom or side of the
mixing container before starting mixer.

(1) Be certain that all mounting hardware and the setscrews
of coupling are properly tightened prior to operation.

Laboratory mixers are designed for mixing of fluid in a container.
The mixer is mounted using a supplied clamp or bracket, which is
attached to a tank. The shafts with propeller are removable
for cleaning.

General Safety Information

TO INSURE SAFE AND EASY USE OF YOUR MIXER,
READ THESE INSTRUCTIONS BEFORE USING.

Warning: These mixers are intended for specific functions.
Please follow all instructions to insure
safe and proper use.

ASSEMBLY INSTRUCTIONS AND PARTS LIST

MIXER MODELS: L-1-300, L-1-CL, L-1-BK

Description

"L" SERIES MIXER

ATTENTION:

295 DeKalb Pike, North Wales, PA 19454
TEL: [phone]
FAX: [phone]
Toll Free FAX: [phone]

100783

-

-

-

003128

000967

L-1-CL 18

101221 101221

SHAFT COUPLING WITH SETSCREWS

3

SHAFT ASS'Y. 5/16" DIA. X 24" LG. & 3" PROP.
SHAFT ASS'Y. 5/16" DIA. X 18" LG. & 3" PROP.
SHAFT ASS'Y. 5/16" DIA. X 12" LG. & 3" PROP.

-- -

SHAFT ASS'Y. 5/16" DIA. X 30" LG. & 3" PROP.

000529

100783

-

-

-

-

000967

L-1-E

101221

000970

100783

-

-

000967

L-1-CL 12

101221

-

004113

-

000528 000528000528 000528
002092 002092002092 002092

100642 100642100642 100642

MOUNTING BRACKET

9

-2 - - --

000529 000529000529

-

100783

-

-

-

000967

L-1-BK

101221

-

-

-

000968

-

001073

-

-

-

-

-

-

-

-

100783

001073

-

101221
000967

L-1-300

10

MOUNTING BRACKET -1 - - -

003287

- -

PART NO. PART NO. PART NO.PART NO. PART NO.PART NO.PART NO.

A COMPANY

www.neptune1.com

DOVER