Neptune AVD-2WTD70VAH, AVD-2WTD70VAHD User Manual
7-2D003
SUPER WDR/3D DNR
DOME CAMERA
USER’S MANUAL
SUPER WDR 3D DNR DOME
■
■
■
■
■
■
■
■
■
■
■
■
1/3” Color Vertical Double Density CCD
High Resolution 600TV Lines
WDR(Wide Dynamic Range)
3D DNR(Digital Noise Reduction)
Sens-Up Function(x512)
Eclipse Function
RS485 ( PELCO-D) Optional
Heater & Blower Option
35pcs IR LED Vandal Dome Camera or
Non-IR LED Vandal Dome Camera
Flush or Surface Mounting Type
True 3-Axis Easy Ball Type Gimbal Bracket built-in
IP68 rate Waterproof Design
1. Features
SUPER WDR(Wide Dynamic Range)
Wide Dynamic Range to the camera which provides superior images, internally and
externally, even under extreme light and dark contracts. It automatically compensates
the necessary light levels to get detailed information in the dark part of the image
without saturation from the bright part.
600 TVL ULTRA HIGH RESOLUTION
The horizontal resolution is 600 TV Lines in Color mode and 700 TV Lines in Black/
White mode using a high density CCD. It gives a vivid image output with super
high horizontal resolution.
3D DNR(Digital Noise Reduction)
3D-DNR (3-Dimensional Digital Noise Reduction) function using upgraded 3D filtering.
This function is automatically enabled when the camera is being used and provides
clear and superior images in very low light luminance.
D-ZOOM(x1~x10)
Digital zoom magnification to get an enlarged video image. It has remote control technology
for a camera without physical control, by a built-in pan & tilt function on the chip.
ZERO DEFECT
Adaptive Defect Correction delivers clear picture capture in very low light luminance using
two algorithms for defect pixel compensation.
DIS(Digital Image Stabilization)
Digital image stabilisation and anti-shaking compensation against outside influences, such as
wind and vibration. After installation, the camera gives a much more stable video output.
Sens-Up(x512, DSS)
Achieves high quality pictures by supporting a long exposure time - more than 1/50second
- and enables recognition of the shape and color of a suspended object under no light
conditions - in cases where exposure time is greater than 8 seconds (x512).
POLYGONAL PRIVACY MASKING(Polygonal, 8colors)
Ensures privacy protection for private and specific areas on the video signal output using
a polygonal masking function. It allows the size and position of the masking areas to be
controlled very easily, and there are 8 mask areas which are user programmable - color,
brightness and mosaic.
ECLIPSE
If there is a highlight within a limited environment such as car park, It makes it possible
to review vehicle license plates by removing the highlight.
HIGH SENSITIVITY TRUE DAY&NIGHT
The Day & Night function delivers high quality color rendition and converts automatically
into monochrome as luminance levels drop.
2. Components
Vandal Dome Camera(Surface Mount Type)
IR LED Vandal Dome
Non-IR LED Vandal Dome
IR LED Vandal Dome
Non-IR LED Vandal Dome
Vandal Dome Camera(Flush Mount Type)
SCREW
SIDE CAP
Mounting Template
Manual
L-WRENCH
Second Video & External OSD Control Cable
SUPER
WDR/3D DNR
DOME CAMERA
USER’S MANUAL
SUPER WDR 3D DNR
■
■
■
■
■
■
■
■
■
■
■
■
■
Sony 1/3” Color Vertical Double Density CCD
Sony 1/3” SuperHAD II CCD
960H CCD (700TV Lines)
High Resolution 600TV Lines
High Resolution 700TV Lines(960H)
WDR(Wide Dynamic Range)
3D DNR(Digital Noise Reduction)
Sens-Up Function(x512)
Eclipse Function
RS485 ( PELCO-D) Optional
UTP Interface Optional
Heater & Blower Option
35pcs IR LED Vandal Dome Camera or
Non-IR LED Vandal Dome Camera
Flush or Surface Mounting Type
True 3-Axis Easy Ball Type Gimbal Bracket built-in
IP67 rate Waterproof Design
70.0
109.0
Mounting Template
Surface Mount
70.0
109.0
Mounting Template
Surface Mount
SCREW
Mounting Template
Manual
L-WRENCH
Second Video & External OSD Control Cable
SUPER
WDR/3D DNR
DOME CAMERA
USER’S MANUAL
SUPER WDR 3D DNR
■
■
■
■
■
■
■
■
■
■
■
■
■
Sony 1/3” Color Vertical Double Density CCD
Sony 1/3” SuperHAD II CCD
960H CCD (700TV Lines)
High Resolution 600TV Lines
High Resolution 700TV Lines(960H)
WDR(Wide Dynamic Range)
3D DNR(Digital Noise Reduction)
Sens-Up Function(x512)
Eclipse Function
RS485 ( PELCO-D) Optional
UTP Interface Optional
Heater & Blower Option
35pcs IR LED Vandal Dome Camera or
Non-IR LED Vandal Dome Camera
Flush or Surface Mounting Type
True 3-Axis Easy Ball Type Gimbal Bracket built-in
IP67 rate Waterproof Design
3. Names and Functions of Parts
Surface Mount
POWER
RS-485(Optional)
3/4” Cap (2EA)
BNC
Plastic Anchors
Surface Mounting Screws
M4 x 30
OSD Board
Service Video
10
11
12
13
14
15
16
17
1
Bubble
Dome Cover
2
Assembly Torx Screw
M4 X 9(3EA)
22
Flush Mount Base
7
8
9
Heater & Blower Board
(Optional)
Assembly Screw(Surface Mount)
M4 X 10 (4EA)
Lens
3
Bracket
6
Surface Mount
Fix Screw
LEDs
4
Gimbal
5
19
Safety Cable
21
20
18
Control Board
4. Installation & Connection
Surface Mount Installation
UNLOCK LOCK
STEP :
1. Mount the surface mount
plate to a sturdy surface or
wall with the installation
template (mouting screws
M4 x 30).
2. Connect the pre-drilled two
screws in the flush mounting
ring through the locking
hole( ) and turn it
counterwise for the
temporary locking system
before drilling four screws
(M4 x 10) of flush mount ring.
Please check if the symbol
in the surface mount ring and
the square hole ( ) in the
flush mount ring meet in a line
when it is locked.
3. Screw with four screws
(M4 x 10) from flush mount
ring to be mounted with the
surface mount.
1
2
3
1
2
3
Surface Mount Ring (Symbol)
Flush Mount Ring Square Hole
Dome Cover Ring (Symbol)
Loading...