Page 1
Installation Instructions for Backlit Mirror
MODEL: NE30012436
120VAC 50/60Hz
IP44
Included
LED Mirror
1X
Suggested Tools
Step 1.
Determine the installation direction and mark the
position of the screw holes through the hanging
strip on the wall ensuring it is level.
Level ruler
NOTE: Hardware not shown to actual size.
Hanging strip
1X
Eelectric hand drill Level rulerRubber hammer PencilTapeImpact drill
Screws (M4x30mm)
3X
Step 2.
Drill the holes.
Wall Anchors
Holes marked in step 1
3X
Step 3.
Put in the wall Anchors.
Connector
3X
Legend
L
N
Attention: Ensure that power is off
at the fuse box or circuit breaker
before installation.
Holes drilled in Step 2
= Line/Hot/Black
= Neutral/White
= Ground/Green
off
Step 4.
Fix the mounting bracket with the screws.
Hanging strip
Step 5:
Connect the wires.
POWER CABLE
BLACK(HOT)
WHITE(NEUTRAL)
WALL
Step 6:
Hang the mirror onto the aluminum bar.
It can be hung vertically and horizontally
GREEN(GROUND)
MIRROR CABLE
Notice:
1. This product doesn't provide plug;
2. It can mount on wall surface or inset the wall;
3. After-sales service: will provide LED strip or LED
driver to replace if they don't work
replace 2.475 meter
Option 1, hang vertically. Option 2, hang horizontally
LED Driver
Loading...