Smart Fitness Watch
MANUAL QUICK GUIDE
Quick Start Guide
1
Package List
S1 Smart Band*1 USB Magnetic Charging Cable*1 Quick Start Guide*1
For First Use
2
Front
Thank you for purchasing, please ensure the battery of band is charged full before
your first use. Please use standard 5 V power source for charging, power bank is not
recommended.
Back
About S1 Smart Band
3
Basic button
*Tap the basic button to wake up
the screen when screen is sleep.
*Tap the basic button to switch
function when screen is sleep.
Wearing Manner and Maintenance
4
BPM
120
DBP
120
When you need to take band from strap
or insert band into strap, please do it
from top to bottom.
* To get accurate biometric data, your S1 Smart Band needs to fit snugly on your wrist.
The correct way is that wearing band on the position by one finger width to your carpal,
and the recommended tightness space is that allows to insert one finger inside only.
*If your carpal sweat heavy after sport, it’s recommended to remove band and clear its
surface until your contacting skin dry.
Install APP “GetFit 3.0”
5
Scan QR code to download and install GetFit 3.0 freely
Register and Log in APP to Connect with Band
6
Click and enter APP Finish the register with email address/
（actual screen and icon may vary by version and platform）
One S1 Smart Band could pair with one cellphone via Bluetooth simultaneously, which could
enable function incoming call inform, data sync to APP and more. S1 could keep your health
data such as heart rate and blood pressure for one day
phone number/third-party ID
search band and finish bond
Band Function
7
Basic band function without APP：
●Real time blood pressure detection（press for 3 secs to run / quit Detection Mode,
the display will show and keep the detect data once that is generated until next
detection mode run.）
●Real time blood pressure detection（press for 3 secs to run / quit Detection Mode,
the display will show and keep the detect data once that is generated until next
detection mode run.）
●Pedometer ●Distance calculation
●Calories burn calculation ● Anti-Lost
●Time/date display
(band needs to pair with phone for auto time calibration at first use)
More band function with APP：
●Sleep quality monitor ●Heart rate monitor and record
●Blood pressure monitor and record ●Remote camera control
●Find my phone ●Social sharing
●Incoming phone ●Schedule reminder & alarm
●Notification（SMS，third-party new message）
●Health care reminder ( drink/activity reminder)
●Personal health management (exercise and sleep goal setting)
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Loading...