Neoline WIDE S49 User Manual

TWO-CHANNEL DASHBOARD

CAMERA

NEOLINE WIDE S49

User Manual

NEOLINE WIDE 549

T

WO-C

HA

NNEL DAS

HBOA

RD

C

AMERA

2

Dear Purchaser,

Thank you for acquiring NEOLINE Wide S49 dashboard camera. Please carefully

read this manual to the end in order to correctly use the device and extend its

service life. Retain User Manual to consult it if necessary in future.

According to paragraph 2, Article 26.7 of RF Code of Administrative Offences (in
wording of the Federal Law No. 114-FZ of 26.04.2016 ), documents significant for
proceedings on administrative offence shall include still and motion picture
footage, audio and video recordings, information bases and data banks and
other information carriers. Thus, events (including road traffic accidents,

violations of road traffic rules or absence thereof) recorded by this dashboard
camera can be considered by court (in particular) as an evidential basis.

Content

1. Operational conditions ...........................................................................................................3

2. Technical specifications ..........................................................................................................4

3. List of Equipment .......................................................................................................................5

4. Description of Device and Indicators ...................................................................................6

5. Installation of Dashboard Camera ...........................................................................................8

6. Operation................................... ...................................................................................................11

7. Troubleshooting ......................................................................................................................... 23

3

1. Get acquainted with conditions of in-warranty service.

2. Do not install or remove memory card when the dashboard camera is switched on to

avoid damage to the device and recorded video files.

3. Only use high-quality microSD cards not lower than Class 6 to avoid recording dropouts

and delayed images.

4. Use of 8Gb to 32Gb card is recommended.

5. Device should only be used with accessories from the delivery set. NEOLINE disclaims

responsibility for possible damages to the product in case accessories of third-party

manufacturers are used.

6. Do not expose the product to the effect of fire, moisture or chemically active substances

(petrol, solvents, reagents etc.).

7. Disassembly or modification of the product is prohibited.

8. NEOLINE shall not be held responsible for loss of data and/or damage, whether direct or

indirect, caused to the user or to a third party through improper use of the device or

software, incorrect installation, use of accessories not included in the delivery set.

9. Important! In some motor cars, power to 12/24V socket is delivered also with ignition off.

To avoid accumulator discharge, it is recommended to disconnect the dashboard camera

from the vehicle network (remove power adapter from the cigarette lighter socket).

10. Format microSD card not rarer than once in two months to avoid damage of its file

system.

11. Observe temperature conditions of storage and operation (see technical

specifications). Do not allow lasting sun exposure of the device.

12. Do not remove memory card from working device to avoid data loss and breakage.

Manufacturer reserves the right to bring amendments in the equipment list, hardware

and software of the device without prior notification.

1. Operational Conditions

4

2. Technical Specifications

• Video resolution
FHD 1920*1080 (30k/s)
HD 1280*720 (30k/s)

• Viewing angle 155 degrees

• Display: LCD, 3’’

• Video recording format/compression: MOV/H.264

• Bitrate, max.: 16 Мб/с

• Built-in accumulator battery470 мА

• Support of MicroSD memory cards, class 10 + , 8 to 32 GB

• Interval loop recording , min: 1/3/5

• Continuous recording

• Automatic ON/OFF

• Operating temperature: -10°C to +40 С°

• Number plate stamp

• Date/time stamp

• Audio recording

• Built-in loudspeaker

• G-sensor

• Motion sensor

• Parking mode

• Input voltage DC charger: 12V/24V

• Input voltage of the device : DC 5V/1A

• Bracket, type: suction cup, 3M

• Dimensions: 89*53*28.5 mm

• Weight: 86 g

5

3. List of Equipment

• Car dashboard camera NEOLINE Wide S49

• Rear view camera

• Bracket with suction cup

• Bracket with 3M scotch tape

• Car charger

• Operation manual

• Warranty card

6

4. Description of Device and Indicators

/ )

/ )

/ )

1) Button “Back”

(

2) Button “Up” (

3) Button “Down” (

4) Button “Enter” (

/ )

10) Reset button

11) Microphone

12) Power button

13) mini-USB receptacle

14) Memory card slot

15) HDMI output

16)

Rear view camera connector

17) Bracket seat

5) Camera display

switchover button (

6) Indicator

7) Display

8) Lodspeaker

9) Wide-angle lens

/ )

13

14

8

9

6

7

1
2
3
4
5

17

15

16

10

12

11

7

Battery Condition Indicator

Icon

Device Status

Description

Indicator Colour

Battery fully charged.

Battery 2/3 charged.

Battery 1/3 charged.

Battery discharged.

Battery is charging.

Connect car adapter to charge, battery is fully

discharged.

Power off, battery is charging.

Power off, battery fully charged.

Power on, battery is charging.

Power on, battery fully charged.

Standby mode/standby mode with disconnected

screen

Recording/

recording with disconnected screen

Red

No light

Red

Green

Green

Red blinking

Note

Please note that at temperatures below 0°С and above 45°C the power
adapter will continue delivering power to the device but the lithium-ion
battery will not be charged. It is connected with peculiar features of lithium­ion batteries and intended to extend their service life, being not a failure

Light Indicators

8

[ Installation of Dashboard Camera ]

Windshield Mounting

- Mount bracket on the device. Move it in the bracket holder till it goes
click.

- Remove protective film from adhesive bracket.

9

- Firmly holding the bracket base on the windshield, check that the base is

securely fixed.

Adjustment of Device Position

- Loosen knob to rotate the device vertically or horizontally.

Then tighten the knob to securely fix the dashboard camera.

knob

10

Power Connection

Only use power adapter included in the product delivery set to supply the device
and charge the battery.

- Connect one connector of power adapter to mini-USB receptacle on the

device.

- Connect other connector of power adapter to the car cigarette lighter socket.

- After car engine is started, the device will automatically switch on.

Note

For optimal view, the device should be mounted next to the rear view
mirror on the centreline and top of the windshield.
Position the lens so that the camera captures the image in proportion
“40% sky/ 60% road” to reach the best filming results.

11

[ Operation ]

Preparation of the device

А. Insert МicroSD card into the memory card slot.

Switch off the device before memory card installation and insert memory

card till it is fully fixed.

Card installation: Position MicroSD card against the slot as shown on figure

below and insert till it goes click.

Card removal: carefully press the card and the remove from the slot.

IMPORTANT: Attempting to insert the card with a wrong side can damage the

device and the card itself. Make sure the memory card is in correct position.

Warning: Do not apply too much effort when installing the memory card in

order to avoid damage of the device. To install , insert MicroSD into the slot till

it is fixed (goes click); if necessary, use a needle to seat the card. To remove the

card, press on it till click and remove from the slot, use a needle if necessary.

12

Switching ON/OFF

Automatic ON/OFF

After car engine is started, the device automatically switches on.

Manual ON/OFF and Reset

Manual ON/OFF

To switch on the device manually, press

power button.

To switch off the device, press power button

and hold it for at least 2 seconds.

Reset

Use a pin or paper clip to press reset button

and hold it for 5 seconds (through the opening).

13

Initial Adjustment

Before using this device, it is necessary to set precise date and time as well as

the network frequency

Date / Time setting

To correctly set date and time, carry out the following steps:

-

-

Press button

to enter main menu.

Use buttons /

to select Date / Time and press button .

Use buttons / to set required value and press button to enter the

next box.

- Repeat step 4

before completion of date/time setting.

Network

Frequency

To correctly set the network frequency:

- Press button to enter main menu.

- Use buttons / to select Network Frequency and press button OK.

- Use buttons / to select 50Hz and press button .

- Press button to exit menu.

14

Video recording

Recording screen

1. Time of recording

2. Number plate stamp

3. Date/time stamp

to enter main menu
to enter Playback menu

to obtain photo
to block current recording

4. Press

5. Press

6. Press

7. Press

8. Press to switch view from front camera
to rear camera and back

9. Audio recording indication

10. Current video recording resolution

11. Memory card indication

12. Battery charge indicator

13. Rear camera view

13

2

1

9

10 11 12

4 5 6 7 8

3

15

Emergency Recording

To start emergency recording, carry out the following steps:

- Press button OK during recording to block current video file against

rerecording. “Emergency situation“ message will appear in left top
corner of the screen

.

Note

1. If function Sensitivity G-sensor is activated and a collision
happened, the device will automatically block current video file.

2. A new file of emergency recording is created, which will be
protected against rerecording in the standard mode of loop
recording. Emergency recording folder will occupy 40% of available
card size. For example, if 8GB memory cards are used, then 3.2GB of
memory space will be reserved for emergency recording files. When
the emergency recording folder will be full, the old emergency
recording files will be deleted automatically with the creation of new
emergency recording files.

16

Photographing

You can take photos of current scene.

During video recording, press

to take a photo.

Fatigue Warning

If Fatigue Warning function is activated, one hour after the recording mode is

started the device will generate an audio warning and then repeat it each half

hour.

- Press button

to enter main menu.

- Use buttons / to select Fatigue Warning and press

button OK

- Use buttons

to select ON amd press button OK

- Press button

to exit menu.

17

Parking Mode

Parking mode is intended to fix events at the parking place.

-Press button to enter main menu.

-Use buttons /

- Use buttons /

to select Parking mode and press bu

tton OK to

select By G-sensor or By Motion Sensor

and press button .

- Press button to exit menu.

Element

By G-sensor

By Motion Sensor

OFF Parking mode is off.

Description

Upon disconnection of external power supply, the
system will issue message: "Press OK to switch off

or Parking mode will be activated after 10
seconds". It means that after 60 seconds the

system will automatically go into the vibration
detection mode; when video camera will detect
any external vibration affecting the motor car, the
video recording will last 10 seconds and the video
file will be protected. If button OK is pressed within
10 seconds, the video camera will switch off instead
of going into vibration detection.

Upon disconnection of external power supply, the
system will issue message: "Press OK to switch off or
Parking mode will be activated after 10 seconds".
That is, if a motion in front of the the camera lens or
an external effect (vibration) is detected, the system
will automatically switch on the motion sensor after
10 seconds, the video recording will last during 10
seconds if the system detects vibration, and will last
for the next 10 seconds until termination of the
vibration effect. If button OK is pressed within 10
seconds, the device switches off without activation of
Parking mode.

18

Note

1. If the battery is fully discharged, the dashboard camera can record
information continuously for about 20 minutes.

2. In operation mode of the device, the battery capacity is gradually
decreasing. This effect is normal for a battery.

3. Upon activation of By G-sensor, the file will be saved in folder
Emergency Situation, upon activation of By Motion Sensor - in folder
Video.

Playback of Video Records and Photographs
Playback

- Press button

- Use buttons /

button

.

- Use

buttons /

and press button

to enter Playback mode.

to select type of file for viewing and press

to go to the next or previous file

to view the file in full-screen mode.

Playback
Front camera
Rear view camera
Events (rear view camera)
Events (front camera)
Photo (front camera)
Photo (rear view camera)

Video Playback Screen

Photo Viewing Screen

2

3
4
5
6
7

8

1 10

9

12

11

2

3
4
5
6

1 10

9

12

11

Element

File Type

Filename

Date/Time

Current Playback
Time

Select File (back)

Previous File

Next File

View

Alternate Camera

Battery

Current file type indication

Filename

Elapsed time and recording time indication

Recording date and time

Press button

to go back to Select File menu

Press button to view the previous

photo/video record

Press button

to view

the next

video record/photo

Press button

to view video (photo)

To switch between front and rear camera on the
screen

Battery charge indication

Description

No.

1

2

3

4

5

6

7

8

Memory card installed

Memory Card

9

10

Displayed File
Number

Number of currently displayed file and total
number of files to be displayed

11

Date/Time Stamp Recording date and time indication

12

19

Playback Screen

20

'JMF%FMFUJPO

/

/

/

UPFOUFSNBJONFOV
UPTFMFDU 'JMF Deletion BOEQSFTT button OK
UPTFMFDUGJMFUZQFBOEQSFTT CVUUPO

OK

to select file to be deleted and press OK to enter

File Deletion menu

- 1SFTTCVUUPO

- 6TF CVUUPOT 

- 6TFCVUUPOT

- Use buttons

- Use buttons

/

to select parameter

- Press button ?? to confirm deletion.

File Deletion

Element

Delete File

Delete current file

Delete all filesDelete All

Description

21

Note
Deleted files cannot be restored. Create backup copies before deletion.

Work with Menu

General parameters can be set via main menu:

- Press button to enter main menu.

-

Use buttons / to select menu item and press

button OK to enter the selected menu.

- Use buttons / to select required parameter and press button
OK to confirm.

- Press button to exit menu.

File Deletion
Delete File
Delete All

22

Menu Elements

MAIN MENU

Resolution: 1080p 30fps / 720p 30fps
Date/Time: use buttons to set current date and time

Date/Time Stamp: ON/OFF
Number Plate Stamp: use buttons to enter car number plate
Audio Recording ON/OFF

Button Click Sound: ON/OFF
Volume: use buttons to set sound volume level

Display Auto OFF: Off/7 seconds/1 minute/3 minutes

Loop recording: 1 minute / 3 minutes / 5 minutes

Exposure: -2.. +2

Network Frequency: 50Hz/60Hz
Sensitivity G-sensor: OFF/ High/Medium/Low
Parking Mode: OFF/by G-sensor/by motion sensor
Fatigue Warning: ON/OFF
Lane Departure Warning System LDWS: ON/OFF
Frontal Collision Warning System FCWS: ON/OFF
File Deletion: Front Camera/Rear View Camera/ Events (Rear View Camera)/

Events (Front Camera)/Photo (Front Camera)/Photo (Rear View Camera)
Language: Русский/English/Español/Deutsch/Polski/Français
Default Settings: Yes/No
Formatting: Yes/No
Software version: firmware version is indicated

PLAYBACK

Front Camera
Rear View Camera
Events (Rear View Camera)
Events (Front Camera)
Photo (Front Camera)
Photo (Rear View Camera)

23

[ Troubleshooting ]

If problems have occurred while following the operational conditions,
use this section to solve them.

- Photographing and video recoding impossible

Check whether there is enough free space on the MicroSD card as well as
whether the card is not blocked.

- Recording self-stoppage

Too large size of video files, only use highspeed MicroSD cards, not lower
than Class 10, of proven manufacturers.

- "Invalid File" message appears on the display upon attempt to view/
playback photo/video file

Uncompleted recording into file through file system error on the MicroSD
card. Format the MicroSD card.

- Washed-out picture

- Check whether the lens is free of dirt, fingerprints. If not, wipe the lens with

soft cloth before operation (use of special agents for care of optics is
recommended in order to avoid damage of the objective lens surface).

- Darkened picture in photos of sky or water

High contrast in the scene will have impact on the exposure. Change exposure
settings in the menu.

- Hangup (no picture on the display, no response to button pressing).

Press button RESET for forced reload of the device.

12031144300-A

Manufacturer:
DigiLife Technologies Co., Ltd
8F, No. 51, Ln. 258, Ruiguang Rd.,
Neihu District, Taipei City 114 Taiwan
Made in China

Official website: www.neoline.ru
Technical support: [e-mail]

In-warranty period: 12 months
Service life: 36 months

DC 5

V, 1A

Operating temperature -100C to +400C

See individual packaging for information about the importer and
authorized service organization