Neo coolcam NAS-DS01Z User Manual

Instruction Manual

Contact Sensor

Model Name:NAS-DS01Z

Brand:NEO Coolcam

Thank you for your support

 Please read the instruction manual carefully before operating

 Please keep the instruction manual after reading

Shenzhen NEO Electronics Co., LTD

1

Product Introduction

Contact sensor is an intelligent security equipment that can transmit the Z-Wave
network which has particular frequency. In the Z-Wave network communications,
contact sensor can be connected to any Z-wave main controller. The contact sensor
can send messages to the Z-wave main controller, and realize association with other
devices through the Z-wave main controller. Different countries or areas, the radio
frequency is different.In the communication with the Z-wave main controller,
the contact sensor can send messages to the Z-wave main controller, but it can
not receive messages from the Z-wave main controller. When alarm is triggered, the
contact sensor sends messages to the Z-wave main controller, the Z-wave main
controller will displays the current status of contact sensor, so the contact sensor can
associate with other devices. Contact sensor is battery powered, is small and can be
installed on the window or door easily. When the door or window is open, the contact
sensor is triggered and linkage alarm realized.

Technical parameters

 Power: CR14250 x1
 Standby current: 1uA
 Battery life: 10 years
 Radio Protocol: Z-wave
 Radio Frequency: 868.4MHz EU; 908.4MHz US; 921.4MHz ANZ; 869.2MHz

RU

 Wireless distance：50m
 Operation temperature: 0-40℃
 Storage temperature: 0-60℃
 Size: Contact sensor main body (L x W x H): 70mmx20mmx20mm

Contact sensor deputy body (L x W x H): 40mmx11mmx11mm

Technical Information

 Install on the door or window.
 Battery powered.
 Easily install with screws or sticker.
 Associate with other devices through the gateway.
 Compatible with any Z-Wave network.

2

Product Configuration

Contact sensor deputy body

LED light

Contact sensor main body

Disassemble button

The code button

Battery

Sticker

Screw stopper

Screw

Product List

 Contact sensor main body 1pc
 Contact sensor deputy body 1pc
 Battery 2pcs
 Screw 6pcs
 Screw stopper 6pcs
 Sticker 2pcs
 Instruction manual 1pc

3