NEO STEAM INFINITE 450 User Manual
P. 1
- Neo Steam 45 0 Innite
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
STEAM 450
INFINITE
FAZE
MAC HINE
P. 2
Neo Steam 45 0 Innite -
English version
1. OVERVIEW
STEAM 450 INFINITE
Faze Machine - 2,000 cubic feet per minute
Steam 450 Innite is a compact faze machine with
an output of 2,000 cubic feet per minute. Among its
main characteristics is its ability to operate continuously, without needing breaks or intervals. On the
other hand - thanks to its technology - it produces a
haze eect from conventional smoke optimizing the
consumption of liquid. Easy to operate and with a
preheating time of 30 to 45 seconds, Steam 450 In-
nite is an ideal faze machine for mobile applications
that require a reliable and powerful xture.
Output
• Smoke output: 2,000 cubic feet per minute
• Warm up time: 30-45 seconds
• Tank: 1 lts./ 34 Oz.
• Liquid consumption: 10 ml/min / 0.3 oz/min
Control
• Operational modes: Wired control (included) &
Wireless control (optional)
Physical
• Connector: 1 TRS 1/4” connector
• LED power supply indicator
• Dimensions: 268x225x174 mm. / 10.5x8.8x6.8 in.
• Weight: 2.1 Kg. / 4.6 Lbs.
P. 3
- Neo Steam 45 0 Innite
English version
2. WARNING
Like all electronic products, Steam 450 Innite
must be used with safety precautions in mind.
Fill enough fog uid before plugging in, empty
uid tank when not in use or moving.
• Products for indoor use only. Keep away from
liquids. Never operate in rain or in damp conditions.
• Use only appropriate, grounded electric power
supply for your unit. See your product specication label for appropriate power supply. This
appliance must be earthed.
• Disconnect from electric mains power supply
when not in use, when lling the fog uid tank,
or when changing a fuse. Keep unit dry. If
moisture or liquids enter the fog machine case,
immediately disconnect power supply. Contact
a service technician to determine safety for use.
• Keep machine in at position, never put it in
tilted place.
• Before moving fog machine, always drain fog
uid into the tank and tighten the tank cap
securely to avoid spilling.
• Without user-serviceable parts in the package,
please contact your local agent or qualied
technician for servicing.
• Without changeable structure by non-qualied
user, please do not open the up cover or have
any change at will, otherwise, it may cause accident!
• Fog machine is for adult use. Keep out of reach
of children. Never leave the unit running unattended.
• Fog machine nozzle gets hot over 200 degrees
(centigrade) during use. Don’t touch! Maintain a
safe distance over 100CM. Never aim the nozzle
directly at people.
• Keep case closed while operating. Put fog ma-
chine in dray place, do not insert objects into
air vents. Allow 20cm space or above around
the machine for proper ventilation.
• Keep fog machine away from ames and
ammable items. Never aim the nozzle at
open ames or sparks. Use only high quality
water-based fog uid. Never put ammable
substances into the tank.
• Machine must cool down before cleaning, servicing or storing.
• Never put any ammable material (lipid, gas,
perfume etc.) into the tank, read the user manual thoroughly before operation.
• Better use our high quality water-based fog
uid, random use with other fog uid may jam
the pipe, or even erode the components inside.
• Keep suicient fog uid in tank. Operating the
unit without suicient fog uid, the pump will
stop working.
• If any abnormal running occurs, stop it imme-
diately, empty the uid, and bring the done up
unit (recommend original box) to your agent or
dealer for servicing. Make sure all uid is empty
from the tank before moving or shipping.
• Never drink fog uid. If ingested, call a doctor
immediately. If uid contacts eyes or skin, rinse
skin thoroughly with water.
• Read user manual instructions thoroughly before
operating. Follow the instruction. Never remove
warning or informative labels from the unit.
Caution
There are no user serviceable parts inside this unit.
Do not attempt any repairs yourself, doing so will
void your manufactures warranty. In the unlikely
event your unit may require service please contact
your local dealer.
Please note
Specications and improvements in the design
of this unit and this manual are subject to change
without any prior written notice.
P. 4
Neo Steam 45 0 Innite -
English version
3. FUNCTIONS
Important
The wires in this mains lead are colored in accordance with the following code.
230V, 240V:
Green and Yellow – Earthed (E)
Blue – Neutral (N)
Brown – Live (L)
Warning: This appliance must be earthed.
A. Bracket
B. Fog Fluid Tank
C. Visible fog uid level indicator
100V, 120V:
Green and Yellow – Earthed (E)
White – Neutral (N)
Black – Live (L)
Warning: This appliance must be earthed.
D. LED indicator
E. Control Socket Connection
F. Electric Power Cord
P. 5
- Neo Steam 45 0 Innite
English version
Description
1. It takes only 30-45 seconds for the rst time
heating up. When switched ON the fogging button of the controller, the unit will start fogging
within 30-45 seconds.
2. It will fog continuously until the liquid is run out.
3. High Safety. No aluminum block inside. So, there
won’t be danger of melted heater or ring.
4. When the fog liquid is run out, the pump and the
heater will stop working automatically.
5. It is equipped with clear LED indicating system:
Lighted red = power; Slow ashing = empty liquid; Fast ashing = Abnormality.
6. Visible fog uid level indicator on rear.
7. Very compact, light and thin.
8. An easy-to-use design made for convenient operation in various settings.
9. Operated by line controller (LC-1K) or wireless
controller (RC-1K). Simple and humanized design
makes Steam 450 Innite easier for use.
4. GETTING READY
All products are thoroughly tested at the factory
and shipped in perfect condition. If damage has occurred during shipping, or if components are missing, please contact your local dealer immediately.
Set Up
1. Open the shipping carton and carefully remove
the unit from the shipping carton.
2. Be sure to remove packing material from
around the fog machine, especially near the
nozzle.
3. Set the fog machine on a dry, at surface.
4. Place the feeder tube with lter deep inside the
full fog uid tank. Use only high quality, water-based fog uid.
5. Firmly attach the remote control mechanism to
socket on the back of the unit.
6. Plug mains power cord from the fog machine
into appropriate power supply socket. Wait
about few seconds for heating element to heat
up.
7. Refer to your controller manual for operation
details. (Appendix A&B)
8. If fog is emitted continuously for a long time,
the uid may use out, please keep suicient fog
uid in tank.
Operation
Fogging
Steam 450 Innite is a fogger that spends very short
time on heating up. Please use LC-1K line controller
for best result.
1. Firmly attach the remote control to socket on
the back of the unit.
2. Plug mains power cord from the fog machine
into appropriate power supply socket. A lit
red LED on the rear indicates that the fogger is
power on.
3. When switched the button of controller to “ON”,
it takes only 30~45 seconds for heating up and
start fogging. Switched the button to “OFF” to
stop fogging.
4. When switched the button of controller to
“OFF”, Steam 450 Innite gets into stand-by status for 5 minutes. Aer 5 minutes, the machine
gets cooling down.
5. Refer to your controller manual for operation
details. (Appendix A & B )
Stand by
Every time (cooling down status included) even
switching ON and then OFF the button of the controller immediately, the machine gets in 5-minute
P. 6
Neo Steam 45 0 Innite -
English version
stand-by status. Under 5-minute stand-by status,
the machine can fog immediately upon switched
ON, and no need to wait 30~45 seconds to heat up.
This function can save unnecessary power consumption.
Note
• The machine must be operated with the attached controller.
• 30-45 seconds aer switching on the fogging
button of the controller under cold status, it
starts fogging automatically.
• Switched on and then o the fogging button
of the controller immediately, the machine
will heat up automatically until it can fog and
will keep stand-by status for 5 minutes. During
the period between 35 seconds aer being
switched on and 5 minutes, the machine can
fog any time, but mains power must be on.
• If only plug mains power, but not switch the
button of controller to “ON”, the machine will
not heat up.
• Self-cleaning function: Aer each fogging, it
is suggested to shot down the power always in
2 minutes to clear the tubing of the remaining
liquid. This helps to have better fogging eect
next time.
5. VERY IMPORTANT
6. TROUBLESHOOTING
35 seconds aer the machine empties liquid, the
pump and the heater stop working, and the lit red
LED ashes slowly to remind of adding liquid. Aer
adding liquid, the machine cannot withdraw automatically from the status of no liquid. Just switch
the controller to OFF to withdraw from the status of
no liquid, and enter normal status.
This troubleshooting guide is meant to help solve
simple problems. If a problem occurs, carry out the
steps below in sequence until a solution is found.
Once the unit operates properly, do not carry out
following steps. If the problem persists, refer servic-
ing to a qualied technician.
Power Connected but No Fog Is Emitted
1. Check the power supply. Plug the unit into
grounded electric power supply socket with
proper voltage.
2. Check your controller if in correct connection.
3. Disconnect fog machine from electric power
supply. Replace fuse with one of the same type.
Loading...