The Micro-USB Port
RJ-11
The NEO Cradle Modem can act as a USB Client.
Host Computer
The Dial-up Modem Port
The NEO Cradle Modem can act as a Modem.
Wall Outlet
™
PX3008
Cradle Modem
Quick Start Guide
January, 2010
Make certain the switch at the back of the cradle is
1
positioned to the left to activate the USB port.
Insert the smaller end of the USB cable in the
2
micro-USB port.
Insert the standard-sized end of the USB cable into
3
the host computer.
Make certain the switch at the back of the cradle is
1
positioned to the right to activate the modem port.
Insert the RJ-11 cable into the modem port.
2
Insert the opposite end of the RJ-11 cable into
3
a wall outlet.
Note: Do not connect to a digital phone line as this may damage the modem.
Psi on Teklogix and NEO
are tra dem ark s of Psion
Teklogix Inc. Other product
name s men tion ed in this
document are trademarks
or registered trademarks of
othe r hard ware , soft ware ,
or service providers and are
used herein for identication
purposes only.
8100193
Rev. A
ISO 9001 Certied
Quality Management System
Contents Of The Box
Cradle Modem
USB Micro-AB to A cable
PX3008
NEO Cradle Modem
User Manual
PN 8000194.A
I
S
O
9
0
0
1
C
er
t
if
i
ed
Q
u
a
lit
y
M
a
n
a
ge
m
e
n
t
S
y
s
t
e
m
User Manual
PX3008
Cradle Modem
Quick Start Guide
January, 2010
I
S
O
9
0
0
1
C
e
r
t
if
i
e
d
Q
�
u
a
l
it
y
M
a
n
a
g
e
m
e
n
t
S
y
s
t
e
m
This Guide
RJ-11 phone cable
Power adaptor
and plugs
Features: Back, Ports, And Battery Charge Well
NEO Compartment
Docking Connector
Drain hole
Battery Contacts
Drain hole
Spare Battery Well
Modem port
DC In port
USB / Modem switch
Micro-USB port
Mounting The Cradle Modem
Getting Started
Choose a Plug for the Universal Power Adaptor.
1
The adaptor may already be tted with the plug you need.
:
1. Press the button on
the power adaptor to
release the plug.
2. Slide the existing plug
out of the adaptor.
3. Slide in the desired
plug into the adaptor
until it clicks.
Insert the NEO to Charge its Battery.
3
Slide the NEO into the Docking
Station until it latches.
Note: Use only the universal
AC power supply approved by
Psion Teklogix for use with the
Docking Station.
.
Insert the Spare Battery.
4
Features: Front
Spare Battery Well
Power / Modem
LED Indicator
NEO Compartment
Spare Battery
LED Indicator
Docking Connector
The Cradle Modem can be xed to the optional
Wall Mount Bracket (model PX3011), or to another
surface, using two broad-headed screws.
Rubber feet (quantity 4)
Mounting holes (quantity 2)
Mounting screw (quantity 2)
Insert the screws into the holes on the base of the unit,
then slide the unit towards the back to secure it.
Note: The position of the
mounting holes is indicated
by markings on the front and
sides of the Cradle Modem.
Connect the Cradle Modem to External Power.
2
DC Input
Note: During charge, the LED indicator on the
NEO is YELLOW until charging reaches 75%.
Between 75% and 95% the indicator ashes
GREEN slowly, and, above 95%, the indicator is
GREEN continuously. The LED indicator on the
Docking Station behaves the same when a spare
battery is being charged.
Allow the NEO and the spare battery to charge for three hours
before rst use.
0 - 40 °C
32 - 104 °F
3 h
Note: Full battery performance is only reached
after the rst few charge/discharge cycles.
Over
Loading...