NEO PROTON 12 USB, PROTON zoom User Manual

USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIONES ANTES DE USAR
PROTON 12 USB
PROTON 12 USB
ENGLISH VERSION
All maintenance must be carried out by a qualified electrician.
A minimum distance of 0.5m must be maintained between the equipment and a combustible surface.
The product must always be operated in a well ventilated area.
DO NOT stare directly into the light source.
Always disconnect the power before carrying out any maintenance.
The earth must always be connected to the ground.
Ensure that all parts of the equipment are kept clean and free of dust.
IMPORTANT
Every person involved with the installation, operation
and maintenance of this device has to be qualified.
Follow the instructions of this manual.
Consider this manual to be part of the total product.
Keep this manual for the entire service life of the product.
Pass this manual on to every further owner or user of the product
Download the latest version of the user manual from the Internet.
OPERATING DETERMINATIONS
This product is only allowed to be operated with an al­ternating voltage of 100-240 V, 50/60 Hz.
This device is designed for professional use, e.g. on stag­es, in clubs, bars, theatres etc.
Do not shake the device. Avoid brute force when install­ing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or dust. There should not be any cables ly­ing around. Please make sure that the unit cannot be touched or bumped.
When using smoke machines, make sure that the de-
For your own safety, please read this user manual careful-
ly before you initially start-up.
SAFETY WARNING
vice is never exposed to the direct smoke jet and is in­stalled in a distance of 0.5 meters between smoke ma­chine and device.
The ambient temperature must always be between -15° C and +45° C. Keep away from direct insulation (particu­larly in cars) and heaters.
Never use the device during thunderstorms. Over volt­age could destroy the device. Always disconnect the de­vice during thunderstorms.
The device must only be installed on a non-flamma­ble surface. In order to safeguard suicient ventilation, leave 50 cm of free space around the device.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the correct fixation points only. The safe­ty-rope must never be fixed at the transport handles!
Only operate the fixture aer having checked that the housing is firmly closed and all screws are tightly fastened.
Operate the device only aer having become familiarized with its functions. Do not permit operation by persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
PROTON 12 USB
Professional LED Par with USB port - 12 x RGB 3W LEDs
Proton 12 USB is the comeback of one of the most popular
fixtures in the industry; a light and compact equipment pow-
ered by 12 RGB 3W LEDs. Thanks to its tri-color LED technol-
ogy, the unit enables a smooth RGB mix with no multicolor
shadows. With its 15º beam angle, Proton 12 USB is ideal for
mobile and install applications. The fixture has also a USB
port that - in combination with NEO Stick USB - allows the
user to control the unit wireless.
Source & Optics
Light Source: 12 x 3-in-1 3W LEDs LEDs life: 50.000 hours Beam Angle: 15º
Photometric data
Luminous flux: 1118 Lux @ 3m (10 )
Eects & functions
Controllable via NEO Wi app - iOS® & Android® - Combined
with the NEO Stick USB
Tri-color LED technology: Smooth RGB mix with no multi col-
ored shadows
Color macros and rainbow eect
Dimmer: 0-100% general & for all colors
4 dimming modes
Strobe eect: 1-30Hz
Flicker free (Ideal for broadcasting)
6 built-in programs
IR control available (not included)
Built-in microphone
Control
DMX channels: 3/8 Operational modes: DMX, Master/Slave, Auto-run, Static Col­ors and Sound-Active Updatable soware via DMX USB port for Wifi control - Through NEO USB Stick
Electrical
Input voltage range: AC100–240V, 50-60Hz Power consumption: 40W
Physical
IP Rating: IP20 4-digit LCD display DMX connectors: 2 XLR connectors (XLR-3 input and output) USB Port Power supply & thru connectors Dimensions: 251x227x84 mm. / 9.9x8.9x3.3 in. Weight: 1.8 Kg. / 4 Lbs.
PROTON 12 USB
ENGLISH VERSION
Menu
Loading...
+ 8 hidden pages