NEO Ion 3715Z User Manual

P. 1

- Neo ION 371 5Z

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

ION 3715Z

moving head powered by 37 x 4-in-1

OSRAM® 15W LEDs

P. 2

Neo ION 371 5Z -

1. OVERVIEW

English version

Ion 3715Z

Moving head powered by 37 x 4-in-1 OSRAM® 15W LEDs

Ion 3715Z is a versatile moving head powered by
37 x 4-in-1 OSRAM® 15W LEDs that sports a variable
zoom that goes from 6º to 50º. Versatility and power
output get new meanings thanks to the enormous
action capacity brought by its beam angle variation,
the pixel by pixel control and the highlighted optics
design. This moving head is equipped with quad­color LED technology, enabling a smooth RGBW
mix with no multicolor shadows. The unit comes
also with preset programs on 2700K, 3200K, 4200K,
5600K and 8000K color temperatures. Ion 3715Z
is not only a beam & wash moving head with pixel
mapping, but also has the velocity and reaction
capacity of the most compact moving heads in the
industry.

Source & Optics

• Light Source: 37 x 4-in-1 OSRAM® 15W LEDs

• LEDs life: 60,000 hours

• Beam angle: 6° to 50°

Photometric data

• Luminous ux: 8000 lumen

• 6º beam angle: 30440 lux @ 3m (10 .)

• 50º beam angle: 5200 lux @ 3m (10 .)

Effects & Functions

• Pixel mapping: Pixel by pixel control

• Dimmer: Full range 0-100%

• Strobe eect

• Quad-color LED technology: Smooth RGBW mix
with no multi colored shadows

• Vivid, saturated and uniform colors

• Color temperature presets: 2700K, 3200K,

4200K, 5600K & 8000K

Control

• DMX Channels: 19/21/41/170

• Wireless DMX (optional)

• Advanced RDM Function

• Indicated temperature for base, arm & lamp

• IC backup communication

• RDM read voltage, current power consump­tion of the lamp

• Soware update vía DMX

• Fan speed based on temperature

Movement

• Pan: 540° / 630º

• Tilt: 265°

• 3-phase motor

• 16-bit resolution

• Auto repositioning

Electrical

• Input voltage range: 100–240V, 50-60Hz

• Power Supply: Automatic range

• Max. power consumption: 316W

Physical

• DMX Connectors: 2 XLR connectors (XLR-3

input & output)

• Power supply connectors: PowerCON® In/Out

• 2.4 inches LCD graphic display

• Dimensions: 444x250x506 mm. / 17.5x9.8x19.9
in.

• Weight: 17 Kg. / 37.4 Lb.

P. 3

- Neo ION 371 5Z

English version

Description of the Device

9. Wireless indicator

10. Mic

11. Le button

12. Battery indicator

13. Up button

14. Down button

15. Enter button

16. Right button

17. Ethernet out

18. 5-pin DMX in

19. Ethernet in

20. 5-pin DMX out

21. Powercon in

22. Fuse

1. Project lens

2. Head

3. Arm

4. Base

5. Display

6. Foot stand

7. Operation button

8. Handel

1

2
3

4

8

7

6

5

9

10 11 12 13

14 16

15

17 18 19 20 21 22

P. 4

Neo ION 371 5Z -

English version

Before operate this unit, please carefully read this users guide and keep if needed in
future. It’s necessary to respect following rules.

The disposal of the device aer lifecycle could damage the environment, need to take

it to special company for recycling or return to authorized dealer.

The products referred to in this manual conform to the Eur opean Community Direc­tives and are therefore marked with CE logo.

Keep this device away from children and unauthorized users, the manufacturer will
not take responsibility for the damage due to any disregard of the information provid­ed in this manual and wrong operation.

Before operate the device, pls make sure the xture is in good housing, ensure pan

and tilt can rotate in its complete range.

Pls make sure minimal 0.5m distance need to kept between the xture to any am­mable material.

The device can only run with 100-240v voltage, 50/60Hz power, don’t connect to any
other wrong power. Disconnect the device from main power before open the shield or
maintenance.

The device is designed only for indoor usage, pls keep it away from moisture. Do not
expose the device under the sun or directly to any other lighting source.

Never look directly into the projecting lens when the xture is power on, the light may

trigger epileptic seizures in photosensitive persons or persons with epilepsy. Espe-

cially at beam eect, extreme caution and observance of these safety instructions is

mandatory.

Don’t put or install the device on a surface that subject to vibration
or bumps.

2. SAFETY AND MAINTENANCE INFORMATION

Safety info



--0.5m

P. 5

- Neo ION 371 5Z

English version

Maintenance

Ta=45°C

The device is supposed to work in the temperate range -15° C and +45° C, do not use
the device when the temperate exceed this range.

The lens, shield need to be replaced when obviously broken, never use the device
when the shield is not completed closed.

Safety I class device, need to be earth connected.

When the xture is hanged overhead, the safety rope must be xed to the bottom of
the device to the appropriate xing point.

Always carry the device by the handles, do not take the head or arm directly for trans­portation.

• Operation only allowed to qualied person,
damages due to unprofessional operation or re­move of any parts inside will not be considered
in warranty service. There are no serviceable
parts inside the device or package, service only
leaves to authorized dealers.

• Never allow the optical components contact
with oil, fat or any other liquid.

• A regular clearance of the device is needed for
long-term usage, this is very helpful to maintain

the lifetime and brightness need to use a so

and lint-free cloth to clean the optical system,

fan and air owing tunnel.

P. 6

Neo ION 371 5Z -

English version

Replacement of the fuse

Trouble Shooting

Need to replace with same type and rating, which
originally installed in the device.

Step One: Unplug power cable from main power.
St ep Two: Unscrew the fuse holder out of the hous-

ing with a screwdriver.
Step Three: Remove the broken fuse and replace
with an exact same type of new fuse.
Step Four: Insert the fuse holder back to the hous­ing and screw tight and reconnect power.

Problems Possible reasons Checking or solutions

Device not

power up

Powercon or power cable damaged Change a good power cable to try

Faulty power supply Replace new power supply

Pan/Tilt error

or vibrate

Faulty Pan/Tilt PCB Replace PT001 PCB

Faulty opto sensor Replace opto sensor OP001

Cable loosen Check the cable connect to OP001

LED o

Temperature protection Check the temperature from menu

Fan not working Check the fan speed info from menu

Faulty LED Replace new LED

Dimmer and strobe set at 0 Set dimmer and strobe channel at 255

Faulty power supply Replace new power supply

Device not response

to DMX

Faulty communication IC Replace the IC with back-up one in the

display PCB

Faulty display PCB Replace new display PCB

Wrong DMX addressing Check the address and setting

Faulty DMX cable Change to a good DMX cable

P. 7

- Neo ION 371 5Z

English version

3. INSTALLATION

The device could be either put on a solid and even
Surface, or mounted upside down or sideways like

le picture.
The mounting place must be suicient stable and

be able to support a weight of 10 times of the unit’s
weight. When the xture is hanged, always addi­tionally secure the device with the safety chain,
fasten the safety rope at a suitable position so that
the maximum fall of the projector will be 20 cm.

How to do mounting installation.

Step two: Install the clamp and bracket on the
bottom of panel, fasten the quick-locks;

Step one: Installation the clamp onto the
omega bracket;

P. 8

Neo ION 371 5Z -

English version

4. CONTROL MENU

Meaning of the icon in menu

Default setting shadowed. mark with 1 can be basic
reloaded, 2 be program reloaded, 3 can be private
reloaded.

Step three: Install the whole device onto
appropriate truss and fasten the clamps, tight

the safety rope with the truss or other xing

point at a suitable position that drop down
distance not exceed 20 cm.

Connect Light Infomation Set Program

Menu tree

Connect

DMX Address 1 XXX DMX address setting
Wireless 1 Wireless Enabled

Light

Max

Temperature 1

80~139°C, 90°C /176~282°F, 194°F

Lamp o if temperature

continuously over for 5
minutes

Lamp Adjust 1

PAN……

Adjust value of each
channels

P. 9

- Neo ION 371 5Z

English version

Info

Time Info. Current XXXX(Hours)

Fixture Life XXXX(Hours)

Fixture boot time
Fixture total run time

Temperature Near Lamp Temp (depends on xture) Temperature Sensors

Fans Speed Near Lamp Fan (depends on xture) Fan speed Sensors
Channel Value PAN…… Display value of channel
Error Message Pan,Tilt…… Error channels

Fixture Model xxxxxxxxxxxx

Display model brand and
model

Soware Ver 1U01 V1.0.00

2U01 V1.0.00

:

Version of each IC

Set

Reset All

Pan&Tilt

Others

Reset all
Reset Pan&Tilt
Reset Others

Movment Pan Reverse 1

Tilt Reverse 1
Pan Degree 1
Encoders 1
Pan/Tilt Mode 1

ON/OFF
ON/OFF
630/540
ON/OFF
Stand/Smooth

Pan Reverse
Tilt Reverse
Choose Pan Degree

Encoder wheel on/o

Choose pan/tilt mode

UI Set Mic Sens. 3

No Signal 1
Temperature. C/F 1
Fans Mode 1
Hibernation 1
Backlight 1
Flip Display 1
Display Bright 3
Brand Show 1
Key Lock 1
Language 1

0~99%,60%
Close/Hold/Auto/
Music
Fahrenheit /Celsius
Auto Speed /High
Speed
OFF, 01M~99M, 15M
02~60m 02m
ON/OFF
ON/OFF
00~31 10
ON/OFF
ON/OFF
En/Fr/Sp

Sensitivity of Mic
Mode when no signal
Temperature at °C/°F
Fans mode
Sleeping mode
Show backlight time
Display 180°reverse
Display Brightness
Show brand or not

Key lock on/o

Language Select

Users User Mode 1 Standard

Extended
Basic-8bit
Basic-16bit
User

Standard mode
Extended mode
Basic-8bit mode
Basic-16bit mode
User program mode

Edit User 3 Max Channel = XX

PAN = CH01
:

Edit users mode

P. 1 0

Neo ION 371 5Z -

English version

Calibration 3 -Password-

Pan..

=XXX
=XXX

Password: 050
Calibrate channel value

Fixture ID 3 Name

-Password­PID Code

Name
Password: 050
Set PID of RDM

Wireless Set 1 DMX On Cable

Reset Connect

ON/OFF
ON/OFF

DMX Send Out
Reset Connect

Reload Default Basic Reload(1)

Program Reload(2)

---Password---

Private Reload(3)

All Reload

ON/OFF
ON/OFF
XXX
ON/OFF
ON/OFF

Basic Reload
Program Reload
Password: 050
Private Reload
All Reload

Program

Play 1 DMX Receive

Slave Receive
Sequence
Music

Slave Receive 1,2,3
Master / Alone
Master / Alone

DMX Receive
Choose slave position
Run Sequence
Music mode

Select Chase 2 Chase Part 1

Chase Part 2
Chase Part 3

Chase 1 ~ 8 Chase 1
Chase 1 ~ 8 Chase 2
Chase 1 ~ 8 Chase 3

Select and run auto
program

Edit Chase 2 Chase 1

:
Chase 8

Chase Test
Step 01
Step 64

=SCxxx
=SCxxx

Test
Beginning scene
Ending scene

Edit Scenes 2 Edit Scene 001

~ Edit Scene
250

Pn,Tilt,……

--Fade
Time--

--Secne
Time-­DMX Input

=xxx
=xxx
=xxx

Input manual scene
Modify manually fading
time
Modify manually scene
time
Input scene from exteri­or controller

Scenes Record ScXX=>ScXX Auto Input scenes

P. 11

- Neo ION 371 5Z

English version

5. DMX CONNECTION AND DMX PROTOCOL

The device is controlled by universal DMX 512
protocol, DMX address is the start channel used
to receive instructions from the external control-

ler. For independent control, each xture must

be assigned its unique address control channels.
For example, this device has four channel modes:
19/41/170/19/21, if we set the mode at standard 19
channels mode, and there are several models need
to be independently controlled, we just simply

address rst xture at 1, and second xture at 20,

third one at 39, etc.
If the devices have the same address, they will
behave synchronically. DMX addressing is limited,
don’t set the address so high that without enough

control channels for the xtures. Display is ashing

when no DMX signal is received.

This device is equipped with 3-pins DMX in and
out sockets only.

Pin 1 = GND | Pin 2 = Signal (-) | Pin 3 = Signal (+) |

Pin 4 = N.A. | Pin 5 = N.A.

The termination is prepared by soldering a 120Ω

resistor between pins 2 and 3.

DMX addressing

Connection: use DMX cable with 5 pin XLR-plugs

to connect the controller with the xture or one
xture with another.