P. 1
- Neo ION 1 32 F
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
ION 132 F
beam moving head powered by the famous
Osram Sirius® HRI 132W lamp
P. 2
Neo ION 1 32 F -
1. OVERVIEW
English version
ION 132F
Beam moving head powered by the famous Osram
Sirius® HRI 132W lamp
ION 132F is a beam moving head powered by the
famous Osram Sirius® HRI 132W lamp. Thanks to its
excellent optical system quality, this xture will give
its users the possibility of achieving an awesome
power in a true 2º beam angle. The unit sports, as an
innovation over its predecessor the Ion 132B, a frost
lter to succeed in wash applications. The xture has
14 colors + open, interchangeable and bidirectional
rainbow eect, 17 static & indexable gobos and an
8-facet rotating prism. Last but not least - thanks to
its 3 phase motor - Ion 132F is capable of extremely
fast movements.
Source & Optics
• Light Source: Osram Sirius® HRI 132W
• Lamp life: 10,000 hours
• Beam angle: 2°
Photometric data
• Luminous Flux: 6200 lumen, 45500 lux @ 15m
(49 .)
Effects & Functions
• Color wheel: 14 interchangeable dichroic lters
+ open, and bidirectional rainbow eect
• Color bounce
• Static gobo wheel: 17 static & indexable gobos
+ open
• Gobo diameter: Outside 13.8 mm., Inside 6 mm.
• Gobo animation eects & shaking
• 8-facet rotating prism
• Frost Filter
• Motorized focus
• Dimmer: Full range 0-100%
• Strobe eect
Control
• DMX channels: 11/14
• Wireless DMX (optional)
• Advanced RDM function
• Hibernation when lost DMX for preset time
• Indicate temperature info of base, arm and
lamp
• Back-up communicating IC
• RDM read voltage, current, power consumption of lamp
• Soware upgrade via DMX
• Fan speed auto-change according to temperature
Movement
• Pan: 6° / 540°
• Tilt: 265°
• 3 phase motor
• 16-bit resolution
• Auto repositioning
Electrical
• Input voltage range: 100–240V, 50-60Hz
• Power supply: Electronic auto-ranging
• Power consumption: 250W
Physical
• DMX connectors: 2 XLR connectors (XLR-3 In
and Out)
• Power supply connectors: PowerCON® In/Out
• 2.4 inch LCD graphic display
• Dimensions: 299x179x435 mm. / 11.7x7x17 in.
• Weight: 10 Kg. / 22 Lbs.
P. 3
- Neo ION 1 32 F
English version
Description of the Device
8. Mic
9. Mode/Esc
10. Down button
11. Up button
12. Enter button
13. Display
14. Powercon out
15. Powercon in
16. Fuse holder
17. 3-pin DMX in
18. 3-pin DMX out
1. Project lens
2. Head
3. Arm
4. Base
5. Display
6. Foot stand
7. Operation button
P. 4
Neo ION 1 32 F -
English version
Colors and Gobos
2 Tan
3 CTB
4
Yellow
5 Shallow purple
6 Brown
7 Blue green
8 Purple red
9 Grass green
10 UV
11 Megenta
12 Green
13 Orange
14 Blue
15 Red
1 Open Open
P. 5
- Neo ION 1 32 F
English version
Static gobo wheel
P. 6
Neo ION 1 32 F -
Before operate this unit, please carefully read this users guide and keep if needed in
future. It’s necessary to respect following rules.
The disposal of the device aer lifecycle could damage the environment, need to take
it to special company for recycling or return to authorized dealer.
The products referred to in this manual conform to the Eur opean Community Directives and are therefore marked with CE logo.
Keep this device away from children and unauthorized users, the manufacturer will
not take responsibility for the damage due to any disregard of the information provided in this manual and wrong operation.
Before operate the device, pls make sure the xture is in good housing, ensure pan
and tilt can rotate in its complete range.
Pls make sure minimal 0.5m distance need to kept between the xture to any ammable material.
The device can only run with 100-240v voltage, 50/60Hz power, don’t connect to any
other wrong power. Disconnect the device from main power before open the shield or
maintenance.
The device is designed only for indoor usage, pls keep it away from moisture. Do not
expose the device under the sun or directly to any other lighting source.
Never look directly into the projecting lens when the xture is power on, the light may
trigger epileptic seizures in photosensitive persons or persons with epilepsy. Espe-
cially at beam eect, extreme caution and observance of these safety instructions is
mandatory.
Don’t put or install the device on a surface that subject to vibration
or bumps.
English version
2. SAFETY AND MAINTENANCE INFORMATION
Safety info
--0.5m
P. 7
- Neo ION 1 32 F
English version
Maintenance
Ta=45°C
The device is supposed to work in the temperate range -15° C and +45° C, do not use
the device when the temperate exceed this range.
The lens, shield need to be replaced when obviously broken, never use the device
when the shield is not completed closed.
Safety I class device, need to be earth connected.
When the xture is hanged overhead, the safety rope must be xed to the bottom of
the device to the appropriate xing point.
Always carry the device by the handles, do not take the head or arm directly for transportation.
• Operation only allowed to qualied person,
damages due to unprofessional operation or remove of any parts inside will not be considered
in warranty service. There are no serviceable
parts inside the device or package, service only
leaves to authorized dealers.
• Never allow the optical components contact
with oil, fat or any other liquid.
• A regular clearance of the device is needed for
long-term usage, this is very helpful to maintain
the lifetime and brightness need to use a so
and lint-free cloth to clean the optical system,
fan and air owing tunnel.
P. 8
Neo ION 1 32 F -
English version
Replacement of the fuse
Trouble Shooting
Need to replace with same type and rating, which
originally installed in the device.
Step One: Unplug power cable from main power.
St ep Two: Unscrew the fuse holder out of the hous-
ing with a screwdriver.
Step Three: Remove the broken fuse and replace
with an exact same type of new fuse.
Step Four: Insert the fuse holder back to the housing and screw tight and reconnect power.
Problems Possible reasons Checking or solutions
Device not
power up
Powercon or power cable damaged Change a good power cable to try
Faulty power supply Replace new power supply
Pan/Tilt error
or vibrate
Faulty Pan/Tilt PCB Replace PT001 PCB
Faulty opto sensor Replace opto sensor OP001
Cable loosen Check the cable connect to OP001
Lamp o
Temperature protection Check the temperature from menu
Fan not working Check the fan speed info from menu
Faulty Lamp Replace new Lamp
Dimmer and strobe set at 0 Set dimmer and strobe channel at 255
Faulty power supply Replace new power supply
Device not response
to DMX
Faulty communication IC Replace the IC with back-up one in the
display PCB
Faulty display PCB Replace new display PCB
Wrong DMX addressing Check the address and setting
Faulty DMX cable Change to a good DMX cable
P. 9
- Neo ION 1 32 F
English version
3. INSTALLATION
The device could be either put on a solid and even
Surface, or mounted upside down or sideways like
le picture.
The mounting place must be suicient stable and
be able to support a weight of 10 times of the unit’s
weight. When the xture is hanged, always additionally secure the device with the safety chain,
fasten the safety rope at a suitable position so that
the maximum fall of the projector will be 20 cm.
How to do mounting installation.
Step two: Install the clamp and bracket on the
bottom of panel, fasten the quick-locks;
Step one: Installation the clamp onto the
bracket;
Loading...