NEO ELIPSOLED 3100 MAX User Manual
P. 1
- Neo Elips oled MAX
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
ELIPSOLED
MAX
ELLIPSOIDAL LED LUMINAIRE
3100K COLOR TEMPERATURE
P. 2
Neo Elips oled MAX -
1. OVERVIEW
English version
ELIPSOLED 3100 MAX
Ellipsoidal LED luminaire - 3100K color temperature
ELIPSOLED 3100 MAX is an ellipsoidal LED luminaire
powered by 1 250W COB LED that works at 3100K
and has a performance 50% greater than the MKII
version, which has an output similar to the classic
750W halogen xtures, with a 90Ra color reproduction. Thanks to its COB LED, Elipsoled 3100 MAX enables a great energy saving and a very low heat generation, important attributes for both theater and
broadcasting. On the other hand, the luminaire has
a 16-bit dimmer with four dimming curves, strobe
effect and adjustable PWM, essential for a flicker
free operation in any given circumstances. Last but
not least, Elipsoled 3100 MAX has a wide variety of
lenses, including two zoom barrels, and is compatible with the most popular lenses in the industry.
Source & Optics
• Light Source: 1 250W COB LED
• Color temperature: 3200K
• LEDs life: 50,000 hours
• Lens tubes: 5º,10º,19º,26º,36º,50º, 15-30º & 25-
50º
• Selectable refresh rate: 600Hz, 1200Hz, 2000Hz,
4000Hz & 25000Hz
Photometric data
• Luminous Flux:
• 19º: 10166 lm
• 26º: 11616 lm
• 36º: 9363 lm
• Color rendering: >90Ra
• Flux:
• 5º: 10581 Lux @ 32 . (10M)
• 10º: 4965 Lux @ 32 . (10M)
• 19º: 1724 Lux @ 32 . (10M)
• 26º: 1250 Lux @ 32 . (10M)
Effects & Functions
• Dimmer: Full range 0-100% (16-bit)
• 4 dimming curves
• Strobe eect: 0-20 ashes per second
• Standard beam shutters
• Manual focus
• Flat and even light eld
• Compatible with industry standard lens tubes
• Adjustable PWM (Pulse Width Modulation) to
work icker free in any given situation
Control
• DMX channels: 1/2/3
• Operational modes: DMX, Static, Master/Slave
& On-board control
• RDM Function
Electrical
• Input voltage range: AC100–240V, 50-60Hz
• Power consumption: 250W
Physical
• LED display
• DMX connectors: 4 XLR connectors (XLR-3 In
and Out; XLR-5 In and Out)
• Power supply connectors: PowerCON® In/Out
• Cooling: Forced convection
• Dimensions: 720x380x340 mm. /
28.3x14.9x13.3 in.
• Weight: 9.6 Kg. / 21.1 Lbs.
P. 3
- Neo Elips oled MAX
English version
IMPORTANT
• This product must be installed by a qualied
professional.
• All maintenance must be carried out by a quali-
ed electrician.
• A minumum distance of 0.5m must be maintained
between the equipment and a combustible surface
• The product must always be operated in a well
ventilated area
• Do not stare directly into the LED light source.
• Always disconnect the power before carrying out
any maintenance.
• The earth must always be connected to the
ground.
• Ensure that all parts of the equipment are kept
clean and free of dust.
P. 4
Neo Elips oled MAX -
English version
2. INSTALLATION
3. DISPLAY PANEL OPERATION
MOUNTING HAN GING
POWE CONNECTIONS
The LED xture can be mounted un a hanging
position using the supporting bracket. The bracket
should be secured to the mounting truss or structure using a standard mounting clamp. Please note
that when hanging the unit a safety cable should
also be used.
• 220~240V: 7 units may be connected in series.
• 110~120V: 4 units may be connented in series.
DISPLAY OPERATION
• MENU return to the previus menu.
• ENTER enter the currently selected menu.
• UP scroll down through the current menu list or
decrease the value of the current function.
• DOWN scroll up through the current menu list
or increase the value of the current function.
QUICK-ACCESS KEYS
MENU By press and holding the MENU key when at
the main menu it is possible to directly access the
[DIM] function.
P. 5
- Neo Elips oled MAX
English version
MENU MAP
P. 6
Neo Elips oled MAX -
DIMMER DIMMING
DIMMING this menu allows the user to manually
control the intensity of the xture. Use UP or DOWN
keys to select required intensity.
RUN MODE
RUN MODE this menu allows the user to select the
operating mode of the xture.
English version
Select DMX for nomral DMX operation of SLAV for
slave operation
DMX ADDRESS
ADDRESS this menu allows the user to select the
start adress of the xture.
Use UP or DOWN keys to select required start
adress.
SPECIAL SETTINGS
Loading...