Page 1
USER MANUAL
BRIDGE X NEO
Page 2
NEO
1
Summary
NEO I is the portable monitoring equipment with which SDI(SD/HD/3G) and HDMI(SD/HD/Full HD)
is supported
Input, output of SDI and HDMI channel consisted of 1 for each. And UP/DOWN/CROSS change is
possible
An integrity check to a signal and an audio level checking function in at most 8 channels are
offered to user
Cross Converter and the Test Pattern Generator function are supported
And The 1080p60 is even supported about setting of the output format(SD/HD/3G) to the signal
Feature
SDI to HDMI, HDMI to SDI cross converter
SDI in/out (SD/HD/3G all standard format)
HDMI in/out (SD/HD/Full HD all standard format)
Tes t Pattern Generator (Static screen and Moving Box screen)
SDI signal integrity check (Loss, TSR, CRC, Line number)
HDMI signal integrity check (Loss, Resolution, HDCP)
Audio level check (At most 8 channels are monitored.)
Audio monitoring earphone output
To uch Screen LCD Built in For Input signal monitoring (5 Inch 800x480)
External Battery(Option)
DC 7V ~ 17V Operation range
Page 3
USER MANUAL
2
Product Composition
‘
1 of NEO main body
1 of adaptor
Page 4
NEO
3
The name and the function of each product part
1/4 Inch Multi connection hole(Top, Bottom, Left, Right)
Source In
Audio Jack
Multi-Controller
Signal converted out
Touch panel 5.0” View finder
Page 5
USER MANUAL
4
The standard and the performance
Physical
Size (W x H x D) 138.5 x 87.9 x 22 (mm)
weight 325 g
Supply Power + 12 VDC
Power Consumption 9 Watts (Maximum: 10Watts)
Operation temperature 0℃ ~ 70℃
humidity 0% ~ 95% RH, Non-condensing
Digital Video Specs
HDMI v1.3 format Support
Multi-rate SDI format Support
SD format : 525/19.97(NTSC), 625/25(PAL), 480P, 576P
HD format : 720P(24/25/30/50/59.94/60)
1080i(50/59.94/60)
1080p(24/25/30/sf24/50/59.94/60)
LCD Display Specs
Size: 5.0 Inch
Resolution : 800 x 480
Pixel area : 0.135mm(W) x 0.135mm(H)
Display area : 108mm(W) x 64.8(H)
Page 6
NEO
5
Application
Page 7
USER MANUAL
6
Use method
1. Menu explanation
When a menu button is pressed for more than 2 seconds and a touch screen is pushed, the
menu is indicated
1. IN/OUT : The kind of input signals and the resolution of the output signal and
the pattern can be setup
2. Measure : It can be indicated to choose YCbCr, RGB waveform and Audio, Vector Scope
3. Config : It can be set as a screen that audio and automation go off, and version
information is indicated
4. Exit : The menu screen is ended
5. Left : Zoom In
6. Right : Zoom Out
7. FULL/SPLIT : A display mode of a screen (the whole/division) can be chosen
8. STATUS : A state window of the screen upper row is indicated and isn't indicated
9. LCD IN/OUT : The image output by LCD can be chosen by an input signal and an output
signal
10. HDCP : When HDCP is activated at HDMI signal input, it's indicated
Page 8
NEO
7
2. The addition menu explanation
2.1 IN/OUT
INPUT : The signal which consists of SDI, HDMI, Pattern, AUTO and inputs can be chosen
The order of priority to AUTO is SDI > HDMI > Pattern
OUTPUT : It's possible to setting the output resolution
and the kind of patterns can be chosen
When pressing a SET button after choosing the output format, it's applied
Test pattern
SMPTE Color Bar
SMPTE + Move
Pathological
Pathological + Move
Gray
Gray + Move
Black
Black + Move
Page 9
USER MANUAL
8
2.2 Measure
Waveform : It can be indicated to choose YCbCr or RGB waveform at the bottom left
Measure Window : It can be indicated to choose Audio, Vector scope, Cable length or
Jitter on window in split mode
Page 10
NEO
9
1) Audio level display
It is indicated to at most 8 channels
Indication by a video input source
It is indicated as the dbFS reference
2) Vector Scope
It is indicated as the vector scope
3) Length (Option)
Indication a input SDI cable length
Indication by Good, Normal, Bad
4) Jitter (Option)
Indication a pseudo eye pattern with jitter
Peak to Peak Jitter :
Simulated Physical Eye jitter
Max 1 UI Check
Indication by Good, Normal, Bad
< Pseudo EyE Picture >
Page 11
USER MANUAL
10
2.3 Config
LCD Bright : The brightness of the LCD screen can be controlled
LCD Contrast : Contrast of a LCD screen can be controlled
Audio Volume : The volume of sound output by a terminal of earphones
can be controlled
Auto OFF(min) : The timer which to turn off a LCD screen can be setup
Ver : Version information on a system is indicated
2.4 FULL/SPLIT
FULL : A image is indicated on the whole screen
SPLIT : A image is indicated with three division screens, and monitoring information is
shown to the right side
Page 12
NEO
11
2.5 STATUS
1. An audio signal (1 Group 1,2 Channel L/R Signal) is indicated
2. Audio L/R level bar Display (1 Group L/R Signal)
3. Input battery capacity indication (4 step)
4. Auto OFF Activating/deactivating Icon
5. Input selection AUTO function Activating/deactivating Icon
6. Input source kind(SDI, HDMI, Pattern) display icon
7. Input resolution indication
8. Direction of conversion indication
9. Resolution of output
2.6 LCD IN/OUT
INPUT : LCD image display is chosen in the SDI,HDMI input, and it's indicated
(Caution) When it's LCD Input setting, video input is converted in AUTO,
and a screen is indicated by the order of priority of SDI signal or HDMI signal
When doing the measurement for which Test Pattern was used,
it's possible to change it to LCD INPUT mode and measure to HDMI or SDI signal
OUTPUT : LCD image display is indicated as the Converter reference
It's indicated by set type input (SDI/HDMI/TPG)
Page 13
USER MANUAL
12
3. Monitoring information display
1. An input source and input format information are indicated
2. When pressing a reset button, an error count and Run time are initialized
3. When an error occurs by item, it is count and displayed
4. Display sequence of an execution time is day, hour, minute, seconds
SDI information display HDMI information display
- Loss Err : A signal Loss error is displayed - Sync Err : A Sync error is displayed
- EAV Err : A EAV error of a TRS signal is displayed - H active : Horizontal resolution is displayed
-L Num Err: Line number marking error is displayed - V active : Vertical resolution is displayed
- Y CRC Err : A CRC error of Y signal is displayed - MODE : HDMI and DVI mode are displayed
- C CRC Err:A CRC error of Cb,Cr signal is displayed - HDCP : A check of HDCP support is displayed
- 352M : SMPTE352M Payload is displayed - AUD Freq : Audio sampling frequency is displayed
Loading...