NEMO Equipment COSM INSULATED User Manual
©2013 NEMO Equipment, Inc.
Modular Sleep System Modular Sleep System
m
o
p
C
r
e
&
k
c
a
S
u
t
S
s
s
i
o
n
S
t
r
a
p
I
n
d
e
c
d
l
u
to -6C)
The Cosmo
10F to 20F
™
series of pads take inflatable comfort to another level. Cosmo™ Insulated is a lightweight sleeping
(-12C
MINIMUM TEMPERATURE ZONE
pad with a built-in foot pump. With over 3" of thickness and a layer of PrimaLoft® insulation to stop convective
currents, this pad will keep you comfortable on all your adventures anytime of year.
1.Integrated foot pump
3
1
2
2.Baffled insulation chambers
3.Deflation valve (on bottom)
4.Pillow Baffle
4
Setup Instructions:
Make sure dump and micro
adjust valves are closed
1P
Pillowtop
™
Open valves on pump and
step repeatedly to inflate
2P
Cosmo™ Pillowtop™ is a plush cover for your Cosmo™
Insulated that adds 15F of warmth. Features a removable 1"
layer of comfort foam nested in a washable microsuede top.
Use Pillowtop
™
2P to connect two Cosmo™ pads.
Weight:
Width:
Length:
Thickness:
Pack Size:
Fabric:
Close valves and use micro adjust
valve to create desired firmness.
Slipcover
Slipcovers are a great way to enjoy soft, clean, and
washable backcountry bedding. The jersey stretch
fabric slides easily around NEMO pads.
2 lbs, 2 oz / 964 g
25 in / 64 cm
76 in / 193 cm
3 in / 8 cm
9 x 6.5 in dia / 23 x 17 cm dia
75D Polyester
-5F to 5F
To deflate, open dump valve
on the underside of pad.
(-20C
to -15C)
WITH PILLOWTOP™
NEMO Equipment, Inc. • 383 Central Avenue, Suite 400, Dover, NH 03820 • www.nemoequipment.com • Adventure Anywhere™
ALL NEW MATERIAL
Consisting of
URETHANE FOAM
UNDER PENALTY OF LAW
THIS TAG NOT TO BE REMOVED
EXCEPT BY CONSUMER
Cosmo™ Insulated
Top.......................100% Polyester
Coating...............100% Polyurethane
Filling...................100% Polyester
Bottom................100% Polyester
NOTICE: THIS PRODUCT CONTAINS
NON-FLAME RETARDANT
POLYURETHANE FOAM. AVOID
CONTACT WITH OPEN FLAME. 117-75
Certication is made by the manufacturer
that the materials in this article are
described in accordance with the law.
INSTRUCTIONS FOR SETUP
Insert into Cosmo Pillowtop™ [optional]
1
If using with Cosmo Pillowtop™, insert Cosmo Air™ (or Tuo Luxury™) through the
opening for foot pump. Make sure the pad is beneath the foam layer and the
microfiber top covers the grey side of the sleeping pad.
Inflate Base Layer
2
Open both valves on the foot pump of Cosmo Air™, and lay it out flat. The foot pump
portion will self-inflate. Make sure dump valve on the underside of the pad is closed.
Repeatedly step on the foot pump portion which will fill the baffled air chambers.
Adjust Firmness
3
Continue pumping until desired firmness is reached. Close both foot pump valves to
prevent dirt or excessive moisture from entering the pad. Remember that the pump is
at the foot end of the pad, and the oversized baffle acts as a pillow for your head.
Packing Away
4
To deflate, open the dump valve on the underside of the Cosmo™ pad. Fold the edges
of the pad towards the center and roll along the long edge of the pad, towards the
dump valve.
5
Care and Repair
To repair a leak, first clean and dry damaged area. Submerge the inflated pad in water
to help locate leaks. With pad deflated, adhere a fabric patch from the repair kit using a
urethane-based adhesive. This type of adhesive, such as Seam Grip® or Aquaseal®, can
be found at your local outdoor store. Spot clean pad with mild soap and water.
To contact NEMO Customer Service
Email: journey@nemoequipment.com
Phone: 800-997-9301
Remember to leave no trace. Before leaving your campsite take a thorough look
®
©2013 NEMO Equipment, Inc.
around making sure you have not left anything behind, out of place, or damaged.
COSMO™ SERIES
Loading...