NEMO Equipment ASTR INSULATED User Manual
Modular Sleep SystemModular Sleep System
©2013 NEMO Equipment, Inc.
m
o
p
C
r
e
&
s
k
c
a
S
u
t
S
I
s
i
o
n
S
t
r
a
p
d
n
e
c
d
l
u
15F to 25F
Astro™ Insulated is a 2.5" tall air filled sleeping pad. Lateral I-beam baffles make the pad feel wider, smoother, and
more stable. A layer of PrimaLoft
®
insulation to stop convective currents and create consistent and even insulation.
(-9C
MINIMUM TEMPERATURE ZONE
to -3C)
75D polyester fabric resists puncture while keeping the weight down.
2
1. Inflate/Adjust Valve
2. Baffled Air Chambers
3. Pillow Baffle
1
3
Setup Instructions:
™
Open valve to inflate. Close valve. Add or release
Blow or use Disco
inflate pad until it is difficult to add air.
Pad Pump to
Weight:
Width:
Length:
Thickness:
Pack Size:
Fabric:
air for comfort.
0F
Accessories
™
Astro™ Pillowtop™ is a plush cover for your Astro™ Insulated
that adds 15F of warmth. Features a removable 1" layer of
comfort foam nested in a washable microsuede top.
Slipcover Pillowtop
Slipcovers are a great way to enjoy soft, clean, and
washable backcountry bedding. The jersey stretch
fabric slides easily around NEMO pads.
1 lb, 11 oz / 757 g
20 in / 51 cm
72 in / 183 cm
2.5 in / 6 cm
8.5 x 4.5 in dia / 22 x 11 cm dia
75D Polyester
To deflate, twist open valve
to 10F
(-17C
and roll out air.
to -12C)
WITH PILLOWTOP™
NEMO Equipment, Inc. • 383 Central Avenue, Suite 400, Dover, NH 03820 • www.nemoequipment.com • Adventure Anywhere™
ALL NEW MATERIAL
Consisting of
URETHANE FOAM
UNDER PENALTY OF LAW
THIS TAG NOT TO BE REMOVED
EXCEPT BY CONSUMER
Astro™ Insulated
Top.......................100% Polyester
Coating...............100% Polyurethane
Filling...................100% Polyester
Bottom................100% Polyester
NOTICE: THIS PRODUCT CONTAINS
NON-FLAME RETARDANT
POLYURETHANE FOAM. AVOID
CONTACT WITH OPEN FLAME. 117-75
Certication is made by the manufacturer
that the materials in this article are
described in accordance with the law.
INSTRUCTIONS FOR SETUP
Insert into Pillowtop™ [optional]
1
If using with a Pillowtop™ cover, insert Astro Air™ through the Velcro® opening.
Make sure the pad is beneath the foam layer and the microfiber fabric covers the top
of the sleeping pad. Pull the inflation valve through the opening in the Pillowtop™.
Inflate
2
To open the valve, twist counter clockwise and pull. Use your mouth or Disco™ Pad
Pump to inflate the pad until it is difficult to add air. Twist the valve clockwise and
push to close. [Hint: Push the valve in at any point during inflation to prevent air
loss.]
Adjust Firmness
3
With the valve closed, lay on the pad to test the comfort. Add or release air to adjust the
firmness of the pad.
Packing Away
4
To deflate, open the valve and roll out as much air as possible. Unroll pad, fold edges
towards the center to reduce pack size, and roll again. Close the valve once all air has
escaped , and insert the pad into its stuff sack.
5
Care and Repair
To repair a leak, first clean and dry damaged area. Submerge the inflated pad in water
to help locate leaks. With pad deflated, adhere a fabric patch from the repair kit using a
urethane-based adhesive. This type of adhesive, such as Seam Grip® or Aquaseal®, can
be found at your local outdoor store. Spot clean pad with mild soap and water.
To contact NEMO Customer Service
Email: journey@nemoequipment.com
Phone: 800-997-9301
Remember to leave no trace. Before leaving your campsite take a thorough look
®
©2013 NEMO Equipment, Inc.
around making sure you have not left anything behind, out of place, or damaged.
ASTRO™ SERIES
Loading...