Page 1
Only from Nemco!
Easy Chopper 3
Take all the performance, versatility and
speed of the industry's leading chopper,
and make it even more user-friendly for
ultimate ROI supremacy!
™
Page 2
Flying Colors!
Chop, slice and wedge faster than ever! Nemco takes one of its most
versatile food prep tools to the next level with a number of subtle, but
significant, enhancements that are nothing short of breakthroughs in
user-friendly design.
A Champion of Operator Efficiency
Hearing the market’s wish list for an even better chopping tool, Nemco
has evolved its already popular Easy Chopper yet again, with multiple
features the market has never seen before!
• NEW! Color-coded blade assemblies and push blocks make correct
change-out even faster and easier than before—with less risk of
mismatching that can crash the blades and damage the block.
• NEW! Revolutionary push-block “gaskets” reduce cleaning the block
to nothing more than a pull of two tabs and a rinse, wash and sanitize.
Just slip the gasket over its corresponding block before chopping.
When done, remove it and pull all the built-up food debris right out.
No more digging at the block like a pair of muddy football cleats.
• NEW! Engineered nylon-based resin material used to manufacture the
push blocks is more durable for longer performance life, reducing the
risk of tooth breakage from classic commercial kitchen use or block
shavings in the food from accidental blade contact while cutting.
• PLUS, a higher, wider base can sprawl over a standard 1⁄3- or
1⁄6-size six-inch deep food pan, or a two-quart round pan.
Still Tops in Chopping
Meanwhile, the Easy Chopper 3 maintains all the advantages
of its Chopper 2 predecessor, including:
• 41⁄4"-square cutting area handles the BIG veggies with minimal
precutting and is configured to provide a uniform, precise cut
size from edge to edge.
• Weighted ergonomic handle and super-sharp blades give even
your most inexperienced employees the ability to chop, slice
and wedge with elite speed.
• As durable as ever, with commercial-grade aluminum
construction and high-tension stainless-steel blades.
Suggested Uses
The Easy Chopper 3 is the all-in-one heavy
hitter for fast chopping, slicing and wedging of
onions, tomatoes, potatoes, celery, peppers and
other firm veggies. It’s even the go-to for cutting
fresh herbs, like cilantro, basil, parsley and
more. It even cuts cooked chicken and ham!
This reliable versatility, combined with its
user-friendly fringe benefits, makes it the
perfect tool for any high-speed kitchen.
Nemco’s innovative push-block
gaskets make cleaning a cinch.
Just pull the gasket tabs to
remove and clear away all
the block’s food debris in one
simple motion.
1⁄4" cut (Red) | 3⁄8" cut (Blue) | 1⁄ 2" cut (Green) | 1" cut (Black)
The Chopper 3’s interchangeable blade assemblies and push
blocks are color coded to ensure fit, avoid destructive blade
crashing and even make reordering super easy!
Page 3
Weighted ergonomic handle is
tough on produce, easy on elbows
Chop, Slice and Wedge!
Push block’s nylon-based resin is
highly resilient and less prone to
suffer impact damage
Color-coded push-block/blade-set
tandems simplify changeout, greatly
reducing operator error that can
cause damaging mismatches
Easily interchanged blade
cartridges are completely
separate from the guide
rods—no need to remove
the rod bumpers
Guide rods, fixed to the
frame with a Nylok
are easily removed and
replaced if bent or damaged
®
nut,
Push block’s cleaning gasket
made of durable synthetic
and easily removed with a
simple pull of its two tabs
Stainless-steel blades stay
super-sharp and taut for
a clean, one-stroke cut,
every time
Large 41⁄4"-square
cutting area accommodates
the BIG veggies
Cast aluminum frame is
lightweight, but extremely
durable
Tall, sprawling base allows chopped
produce to fall straight into a 1⁄6-
or 1⁄3-size six-inch deep food pan,
or a two-quart round pan
No-slip rubber feet
add stability
Page 4
Replacement parts are available through
Making Your Countertop
More Profitable
NEMCO’s 24-Hour Zip Program.
NEMCO reserves the right to make design,
specification or model changes without notice.
General Specifications
Model Description
Chopping sizes
57500-1
57500-2
57500-3
1
/4" Sq. Cut
3
/8" Sq. Cut
1
/2" Sq. Cut
57500-4 1" Sq. Cut
Slicing sizes
57500-5
57500-6
57500-7
57424-1 Blade Assembly,
57424-2 Blade Assembly,
57424-3 Blade Assembly,
1
/4" Thick Slice
3
/8" Thick Slice
1
/2" Thick Slice
1
/4" Sq. Cut
3
/8" Sq. Cut
1
/2" Sq. Cut
57424-4 Blade Assembly, 1" Sq. Cut
57424-5 Blade Assembly, 1/4" Thick Slice
57424-6 Blade Assembly,
57424-7 Blade Assembly,
3
/8" Thick Slice
1
/2" Thick Slice
Dimensions
Equipment
(w x d x h) 9
*(height from table surface to top of guide rods)
3
/4" x 12" x 191/2"*
Shipping carton (l x w x h) 13" x 13" x 22"
Space between blade block
and counter surface
(for a pan) 6
Shipping weight 13 lbs.
1
/2"
Actual weight 11 lbs.
Optional Accessories
making your
countertop
more profitable
For more information
about Nemco’s full line
of equipment products,
call or visit online.
800.782.6761
NemcoFoodEquip.com
Model Description
57727-6W 6-Section Wedge
57727-8W 8-Section Wedge
56275-1 Cleaning Gasket,
56275-2 Cleaning Gasket,
56275-3 Cleaning Gasket,
1
/4" Red, 3-pk
3
/8" Blue, 3-pk
1
/2" Green, 3-pk
56275-4 Cleaning Gasket, 1" Black, 3-pk
Nemco® Food Equipment, Ltd. – Corp. HQ
301 Meuse Argonne | Hicksville, OH 43526
800.782.6761
Nemco West Distribution Center/Test Kitchen
4232 E Magnolia Street | Phoenix, AZ 85034
www.nemcofoodequip.com
• 419.542.7751 • f: 419.542.6690
Printed 9/15. Printed in the USA.
Loading...