NELSON™ HEAT TRACING SYSTEMS
LT-P SMALL PIPE ADAPTER KIT INSTALLATION
FOR USE WITH PLT OR LT CONNECTION KITS INSTRUCTIONS
DESCRIPTION
The LT-P Small Pipe Adapter Kit is for use with PLT or LT
connection kits to mount to small diameter pipes or tubes.
Covers a size range up to 19mm (.75”) tubing and 13mm
(.50”) pipe.
KIT CONTENTS
1 Small Adapter Plate
2 Pipe Clamps
Pipe Clamp
Pipe
Small Adapter Plate
Pipe Clamp
(not included in kit; see step 2 below)
PLT
LT
Pipe Clamp
Pipe
Small Adapter Plate
Pipe Clamp
(not included in kit; see step 2 below)
1. Install the small adapter plate with pipe clamps included in kit.
2. Mount stand-off with pipe clamps supplied in the PLT or LT connection kits.
Nelson Heat Tracing Systems products are supplied with a limited warranty. Complete Terms and Conditions may be found on Nelson's
website at
www.nelsonheaters.com.
P.O. BOX 726 TULSA, OK 74101 TEL 918-627-5530 FAX 918-641-7336 www.nelsonheaters.com
GA-1470 Rev. 3
1/06
Loading...