NELFC HAA39C, HAA39B, HAA39A, HAA397, HAA391 Datasheet
...
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com
www.nelfc.com
CMOS
HA-A390 Series
Description
The HA-A390 Series of quartz crystal oscillators provide CMOS compatible signals for general purpose
timing applications.
Features
• Wide frequency range–70.1MHz to 125.0MHz
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C
for 4 minutes maximum
• Space-saving alternative to discrete component
oscillators
• High shock resistance, to 3000g
• 3.3 volt operation
• Low Jitter
• High Q Crystal actively tuned oscillator circuit
• Power supply decoupling internal
• No internal PLL avoids cascading PLL problems
• High frequencies due to proprietary design
• All metal, resistance weld, hermetically sealed
package
• Gold plated leads - Solder dipped leads available
upon request
Electrical Connection
Pin Connection
1 N.C.
4 Grd & Case
5 Output
8 V
DD
Dimensions are in inches and MM.
CRYSTAL CLOCK OSCILLATORS
Data Sheet 0019A
Rev. C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com
www.nelfc.com
HA-A390 Series Continued
CMOS
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter Symbol Conditions Min Typical Max
Frequency ----- ----- 70.1MHz ----- 125.0MHz
Duty Cycle ----- @ VDD/2 45/55% ----- 55/45%
Logic 0
VOL @ 600µA ----- 0.1V 0.2V
Logic 1
VOH @ 600µA VDD-0.2V VDD-0.1V ----Rise & Fall Time tr,tf 10-90%VO ----- 1 ns 2 ns
Jitter, RMS
(2)
----- ----- ----- ----- 5 psec
Frequency Stability
(1)
dF/F Overall conditions including: -100ppm ----- +100ppm
voltage, calibration, temp.,
10 yr aging, shock, vibration
General Characteristics
Parameter Symbol Conditions Min Typical Max
Supply Voltage VDD ----- 3.135V 3.3V 3.465V
Supply Current IDD No Load 0.0 mA 40 mA 60 mA
Output current IO ----- 0.0 mA ----- ±25.0 mA
Operating temperature TA ----- 0°C ----- 70°C
Storage temperature TS ----- -55°C ----- 125°C
Power Dissipation P
D
----- ----- ----- 208 mW
Lead temperature TL Soldering, 10 sec. ----- ----- 300°C
Load ----- ----- ----- ----- 15pf
Start-up Time t
s
----- ----- ----- 10 ms
Environmental and Mechanical Characteristics
Mechanical Shock Per MIL-STD-202, Method 213, Condition E
Thermal Shock Per MIL-STD-833, Method 1011, Condition A
Vibration 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
Soldering Condition 300°C for 10 seconds
Hermetic Seal Leak rate less than 1 x 10
-8
atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) Jitter performance is frequency dependent. Please contact factory for full characterization.
Test Load:
Rev. C
CRYSTAL CLOCK OSCILLATORS
HA - A39X - FREQ
Package Code
Tolerance/Performance
HA Leaded 4 pin (8 pin) 0 ±100ppm 0-70°C
SA Leaded 4 pin (8 pin) SMD 1 ±50ppm 0-70°C
Gull Wing 7 ±25ppm 0-70°C
Input Voltage
9 Customer Specific
Code Specification A ±20ppm 0-70°C
A 3.3V B ±50ppm -40 to +85°C
5V C ±100ppm -40 to +85°C
Creating a Part Number
Data Sheet 0019A
Loading...