NEL SJ160, SJ161, SJ169, SJ16A, SJ16B Datasheet

...
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com
www.nelfc.com
TTL
SJ-160 Series
The SJ-160 Series of quartz crystal oscillators are designed to survive standard wave soldering operations without damage.
Features
• Wide frequency range–2.25MHz to 85.0MHz
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C for 4 minutes maximum
• Space-saving alternative to discrete component oscillators
• High shock resistance, to 3000g
• Metal lid electrically connected to ground to reduce EMI
• Low Jitter
• High Q Crystal actively tuned oscillator circuit
• Power supply decoupling internal
• No internal PLL avoids cascading PLL problems
• High frequencies due to proprietary design
• Gold plated leads
• Low power consumption
Electrical Connection
Pin Connection
1 N.C. 2 Grd & Case 3 Output 4 V
CC
CRYSTAL CLOCK OSCILLATORS
Data Sheet 0012K
Rev. F
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: nelsales@nelfc.com
www.nelfc.com
SJ-160 Series Continued
TTL
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter Symbol Conditions Min Typical Max
Frequency ----- ----- 2.25MHz ----- 85.0MHz Duty Cycle ----- @ VCC/2 40/60% ----- 60/40% Logic 0 VOL @ 16mA ----- ----- 0.4V Logic 1 VOH @ 0.4mA 2.4V ----- ----­Rise & Fall Time tr,tf @ 0.4 to 2.4V
<40MHz ----- ----- 8.0 ns 40MHz or greater ----- ----- 5.0 ns
Jitter, RMS
(2)
----- <40MHz OT & >40MHz ----- ----- 5 psec <40MHz Fund ----- ----- 8 psec
Frequency Stability
(1)
dF/F Overall conditions including: -100ppm ----- +100ppm
voltage, calibration, temp., 10 yr aging, shock, vibration
General Characteristics
Parameter Symbol Conditions Min Typical Max
Supply Voltage VCC ----- 4.75V 5.0V 5.25V Supply Current ICC No Load 0.0 mA ----- 50 mA Output current IO ----- 0.0 mA ----- ±16.0 mA Operating temperature TA ----- 0°C ----- 70°C Storage temperature TS ----- -55°C ----- 125°C Power Dissipation P
D
----- ----- ----- 263 mW
Lead temperature TL Soldering, 10 sec. ----- ----- 300°C Load ----- ----- ----- ----- 10 TTL gate Start-up Time t
s
<20MHz ----- ----- 2 ms 20MHz or greater ----- ----- 10 ms
Environmental and Mechanical Characteristics
Mechanical Shock Per MIL-STD-202, Method 213, Condition E Thermal Shock Per MIL-STD-833, Method 1011, Condition A Vibration 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz Soldering Condition 300°C for 10 seconds Hermetic Seal Leak rate less than 1 x 10
-8
atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) Jitter performance is frequency dependent. Please contact factory for full characterization.
Test Load:
Rev. F
CRYSTAL CLOCK OSCILLATORS
SJ - X16X - FREQ
Package Code
Tolerance/Performance
SJ 4 J Lead SMD 0 ±100ppm 0-70°C 1 ±50ppm 0-70°C
7 ±25ppm 0-70°C
Input Voltage
9 Customer Specific Code Specification A ±20ppm 0-70°C A 3.3V B ±50ppm -40 to +85°C 5V C ±100ppm -40 to +85°C
Creating a Part Number
Data Sheet 0012K
Loading...