Neitz RC-II Instruction Manual

BATTERY CHARGER RC-II

INSTRUCTION MANUAL

NEITZ INSTRUMENTS CO., LTD.

International Division

2013.04

1

BATTERY CHARGER RC-II

Thank you for purchasing the NEITZ BATTERY CHARGER RC-II. Before use, please read this
instruction manual to your safety, and keep it handy for future reference.

This Battery Charger has been designed exclusively for use with NEITZ Indirect Ophthalmoscope
BX and Retinoscope RX series.

In addition, please read the instruction manual of the medical instrument before charging.

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS ........................................................................................... 2

2. ITEM CHECK LIST ..................................................................................................... 3

3. NOMENCLATURE ...................................................................................................... 4

3.1. RC-II Main Body ................................................................................................... 4

3.2. AC Adapter ........................................................................................................... 4

4. OPERATION METHOD ............................................................................................... 4

5. MAINTENANCE .......................................................................................................... 5

5.1. Cleaning................................................................................................................ 5

5.2. Storage ................................................................................................................. 5

5.3. Safekeeping and Transportation .......................................................................... 5

5.4. Disposal ............................................................................................................... 5

6. TROUBLESHOOTING ................................................................................................ 6

7. MAIN SPECIFICATIONS ............................................................................................ 6

8. TECHNICAL SUPPORT OR CONTACT INFORMATION ........................................... 7

2

BATTERY CHARGER RC-II

1. SAFETY PRECAUTIONS

This instruction manual uses a variety of common symbols and icons to assist you in proper
handling and usage of this product, and to warn you of potential hazards to yourself and others.
These symbols and icons and their significance are described below.

For customers in Europe

The “CE” mark indicates that this product complies with the European requirements for

safety, health, environment and customer protection. CE-mark products are for sale in

Europe.

WARNING

Do not charge except the designated instrument or the instrument not manufactured
by NEITZ, as this may result in a damage and a fire ignition.

Do not apply a strong impact and do not hurl it. It may cause a damage and an injury.

Do not place it in an unstable nor sloped place, as this may result in a rollover, a
malfunction and a damage.

Do not use in extremely humid nor salty place, nor where the water hangs. It may
cause an electric shock.

Do not use it near the chemicals, the sulfur or a gas produced places. Do not use
near the heat source.

Never attempt to disassemble or modify it, as this may result in an electrical shock,
fire ignition or an injury.

WARNING Improper handling may cause death or serious injury.

CAUTION Improper handling may cause damage or physical loss.

Symbols for prohibited action

Symbol for instructing action

Disassembly

prohibited

Prohibited

Mandatory

3

BATTERY CHARGER RC-II

 Plastic Cover

 Battery Charger RC-II,

Main body

 AC Adapter

 This Instruction

Manual

 Cord

CAUTION

When cleaning it, do not use volatile solvents such as the thinner, polishing powder,
boiling water. It causes deformation and a damage.

Never attempt to touch and transform the terminal for charge, it may cause an injury
and a damage.

Do not sterilize. It may cause a transformation and other troubles.

Before use, please check the cords damage and abnormality, as this may result in a
trouble.

Unplug the charger from outlet if you will not use it for a long period. It may cause a
trouble.

2. ITEM CHECK LIST

Please check that all parts and accessories are present. If any item is missing or damaged, please
contact your dealer.

4

BATTERY CHARGER RC-II

Turn the medical instrument off when charging or do not charge continuously
after the charge completion, it will reduce battery performance and the lifetime.

3. NOMENCLATURE

3.1. Battery charger main body

3.2. AC Adapter

4. OPERATION METHOD

1. Connect the DC Plug of the AC Adapter supplied with the unit to the DC Jack and plug the
adapter into the outlet.

2. Please push the Power switch button from OFF (○ mark) to ON ( I mark). The Power Supply
Light turns GREEN.

3. Please definitely turn off the medical instrument before charging.

4. Charging the instrument takes approximately 15 hours from an empty state.

5. After charge completion, please turn off the unit. A fully charged instrument will last for
approximately 1.5 hours.

6. Please pull the Power Supply Plug out from an outlet, when do not use.

Power

supply

plug

DC Plug

Charge

aperture

Power

supply

light

indicator

Charge

aperture

Power

supply

ON-OFF

indicator

Case

Power
switch

Equipment

designation

Rubber

feet

Input voltage

indication

DC Jack

5

BATTERY CHARGER RC-II

5. MAINTENANCE

5.1. Cleaning

・ Wipe with dry cloth or soft cloth slightly moistened with much diluted natural detergent. After

that wipe with dry cloth again.

・ Maintain the charge apertures are empty.
・ Wipe the terminal parts with cotton swabs.

5.2. Storage

Please store in attached plastic cover when do not use it for a long period.

Operating temperature: Range from 10 C to 40 C (50 F to 104 F)

Storage temperature: Range from -20 C to 60 C (-4 F to 140 F)

5.3. Safekeeping and Transportation

Keep it with charge apertures are empty and not be loaded and impacted.

5.4. Disposal

Dispose it according to local garbage rules or please return to the distributor.

6

BATTERY CHARGER RC-II

6. TROUBLESHOOTING

Please check the following contents when not working normally.

Problem

Possible Causes

Solution

Do not charging

not being made

・ Check if the instrument is inserted

correctly into the charge aperture.

・ Make sure the DC Plug is fully inserted

in DC jack and an appropriate AC
adapter.

・ Make sure the outlet has power.

Longer charging
time or shorter
usage hours

・ The battery is charged

more than 500 times.

・ Battery performance is

getting decreased or
lifetime ends.

・ Change the battery

・ Change the battery

If the problem is not solved, please stop to use and contact the dealer immediately. Contact
information is available in the end.

7. MAIN SPECIFICATIONS

Model name : Battery charger RC-II
Description : Dual / Desk-top type
Dimensions : 180(W) x 98(H) x 78(D) (7.1 x 3.9 x 3.1 in)
Weight : Approximately 460 g (16.2 oz)
Suitable Storage Battery : 1000 RS (Ni-Cd battery)
Input voltage for AC adapter : 100－240 V
Output voltage for AC adapter : DC9V 2.5 A
Power Frequency : 50/60 Hz
Electricity Consumption : 12 VA

7

BATTERY CHARGER RC-II

8. TECHNICAL SUPPORT or CONTACT INFORMATION

Please contact the following address if you have any questions or need technical support. Our
phone customer support is available from 9:15 am to 5:40 pm (Monday to Friday).

NEITZ INSTRUMENTS CO., LTD.

36-13 Wakamatsu-Cho, Shinjuku-Ku, Tokyo 162-0056, JAPAN
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
URL: www.neitz-ophthalmic.com