NEC TOKIN NT2400R56 2C, NT2400R56 2A User Manual
PRODUCT UNDER DEVELOPMENT
2.4GHz ISM Band ZigBee®/IEEE 802.15.4™
RF Modules NT2400R56-2 Series
Overview
The NT2400R56-2 series is 2.4GHz ISM band RF
modules that are ideal for ZigBee® topologies and
IEEE Std 802.15.4™ applications.
The NT2400R56-2 series incorporates a UZ2400
transceiver IC from Uniband Electronic Corporation
and a 78K0R Microcontroller from Renesas
Electronics Corporation with an NEC TOKIN's own
PCB Trace Antenna.
It delivers about 100m of peer-to-peer range
(at 0 dBm, under the outdoor range) and a larger
range using ZigBee®/mesh or Ad-hoc topologies.
Two types of PCB Trace Antennas are used.
One is small mono-pole(A) and the other is omnidirectional radiation(C).
Vol. 02
The NT2400R56-2 series has enough memory
(256 KB flash memory) for ZigBee® PRO Stack and
Application Profiles.
In addition, it has a lot of ADC inputs and I/O ports.
Because of the wide operating range, it is suitable
for battery applications.
Features
◆ 2.4GHz ISM band for worldwide deployment
◆ ZigBee®/IEEE 802.15.4™ network topologycompliant
◆ Integrated PCB Trace Antenna
◆ 1.8V to 3.6V Operating Voltage Range
◆ 10-bit ADC (8 inputs)
◆ Digital I/O (42 ports)
◆ CE, FCC, and the Radio Law of Japan Certified
Note1: The readily available development tools are as follows.
- ZigBee® PRO Software Development Kit from Skyley Networks Inc.
- ZigBee®Network Development Platform from TESSERA TECHNOLOGY INC.
Note2: ZigBee
®
is a registered trademark of the Zigbee Alliance. 802.15.4™ is a trademark of the IEEE.
Applications
◆ Smart Meter
◆ Remote Control
◆ Home Network
◆ Health Care
◆ Building Automation
NT2400R56-2A NT2400R56-2Ｃ
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.04.19 EK-10-005
2.4GHz ISM band ZigBee®/IEEE 802.15.4™
RF Modules NT2400R56-2 Series
Specifications
Model NT2400R56-2A NT2400R56-2C
RF Compliant
Frequency Band
Interference Immunity
Transmit Power
Data Rate
Indoor / Throw Wall Range
Outdoor / RF Line-of-Sight Range
Supply Voltage
Transmit Mode
Supply Current
Receive Mode
Power-down Mode
Ambient Temperature Range
Microcomputer
CPU Clock
I/F Connector
Digital I/O
ADC Inputs
PCB Antenna
Dimension
Type
Maximum Gain
Weight
Regulatory Approvals
IEEE Std 802.15.4™ – 2006, ZigBee® PRO
2400MHz – 2483.5MHz(16 channels)
Direct Sequence Spread Spectrum (DSSS)
Typ. 1.2 mW/MHz (0 dBm)
250 kb/s
40m (vary according to the environmental conditions)
100m (vary according to the environmental conditions)
20MHz:2.7-3.6VDC、5MHz:1.8-3.6VDC (Write operation of Flash:2.7-3.6VDC)
Typ. 30.5mA @ 3VDC:20MHz、 25.4mA @ 3VDC:5MHz
Typ. 27.7mA @ 3VDC:20MHz、 22.6mA @ 3VDC:5MHz
< 1.6 uA @ 25℃
-20℃～+80℃
16bit 78K0R/KE3 uPD78F1146AF1 256KB Flash 12KB RAM
Max. 20MHz (Max. 5MHz @ 1.8VDC)
DF17（2.0)-060DP-0.5V（57） (HIROSE ELECTRIC CO., LTD)
42
8 (10-bit ADC)
Small mono-pole Omni-directional radiation
+2.7 dBi +1.4 dBi
30×48×3.2 mm (excluding connector.) 30×80×3.2 mm (excluding connector)
5.0 g 6.2 g
CE、FCC、Radio Law of Japan(TELEC)
Antenna radiation patterns
NT2400R56-2A NT2400R56-2Ｃ
Z
X
Y
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2010.04.19 EK-10-005
Loading...