How it Works
NEC of America
Loading...
7N2R12A
RF Warning Page
2 pgs40.11 Kb0
Users manual
28 pgs522.09 Kb0

NEC of America 7N2R12A Users manual

Voice/Videophone Calls
■ Making a Voice/Videophone Call
Making a Voice/Videophone Call .......................................................................................... 2
Switching a Voice/Videophone Call during a Call (Caller).................................................. 5
Making International Calls ......................................................................... 6
Using Handsfree Call during a Call................................................................. 8
Using the Redial/Dialed Calls/Received Calls Record..... 8
Using Chaku-moji .......................................................................................... 10
Sending Push Signals Quickly ......................................................................... 12
Using the Prefix Function....................................................................................................... 13
Setting Sub-addresses When Making Calls ....................................... 14
Setting the Alarm Used for Reconnection.............................................. 14
Blocking Out Ambient Noise ..................................................................... 14
Making Handsfree Calls in the Car ........................................................ 14
Redial/Dialed calls/Received calls
■ Receiving a Voice/Videophone Call
Receiving a Voice/Videophone Call...................................................................................... 15
When the Other Party Switches a Voice/Videophone Call (Caller) ................................... 16
Using the Dial Keys to Answer a Call......................................................... 16
Ending/Holding Calls with the Display Rotated Counterclockwise...... 17
Adjusting the Earpiece Volume............................................................................ 17
Adjusting the Ring Volume............................................................................ 17
■ Settings for when you cannot take calls
Holding the Ringing/Current Call ....................................................... 18
Using the Public Mode .................................................................................................... 18
When You Cannot Answer a Received Call.................................................... 20
Having the Caller Leave a Message ....................................................... 21
Having Callers Leave a Message during an Incoming Call ...................... 22
■ Setting the Videophone
Setting Functions for the Videophone............................................................................. 24
WORLD CALL
Hands-free
Chaku-moji
Pause dial
Sub-address setting
Reconnect signal
Noise reduction
In-car Hands-free
Answer setting
Setting when folded
Vol ume
Ring volume
Answer hold/Holding
Missed call
Record message
Quick message
1
Making a Voice/Videophone Call
Enter the phone number of the other
1
party
Always start by entering the
Voice/Videophone Calls
area code, even for calls within the same area. You can enter up to 80 digits for the phone number. However, only the last 26 digits are displayed.
<When you enter a wrong number>
■ To insert a number
v to move the cursor to the number to
Press the left of the position where you want to insert the number, then enter the number.
■ To delete a number
Press v to move the cursor to the number you want to delete, then press Hold down all the numbers to the left of the cursor and the number in the cursor position.
■ To re-enter the number
Move the cursor to the beginning or end of the number and hold down longer to return to the standby screen.
t for 1 second or longer to delete
<Videophone>
■ To make a videophone call with Chara-
den
XU
u (FUNC)X"Select image"X"Chara-
den"XSelect Chara-den
t.
t for 1 second or
Enter phone number
Function menu¨P. 4
r (voice call), o (V.phone)
2
<Voice call>
" " flashes while dialing and lights up during the call.
■ If you hear the busy
tone
The line is busy. Call again after a while.
■ If you hear a message
saying that the other party cannot be reached
The other party's mobile phone is not turned on or is out of signal range. Call again after a while.
■ If you hear a message requesting your
caller ID
Call again with Caller ID Notification enabled. →P. 5 6
<Videophone>
" " flashes while dialing a videophone call and lights up during the call.
■ If a videophone call is not connected→ P. 4
■ To switch between camera image and substitute image
XU
u (FUNC)X
"Substitute image"⇔"My side"
■ To send video from the rear camera
X
d (Change)
Each time you press camera/rear camera switches.
■ To switch the main screen
d (1 second or longer)
X
"Change main disp."→ P. 4
■ To enlarge the camera footage to be sent
XAdjust the zoom using
Zoom→ P.170
■ To mute the voice to send
X
a (マナー ) (1 second or longer)
The " " icon is displayed. To cancel muting, press
second or longer again.
Videophone in-call
Function menu¨P. 4
d (Change), the front
d
a (マナー ) for 1
In-call
2
■ To switch a voice/videophone call during a call→ P. 5
■ To put the current voice/videophone call on hold→ P. 1 8
■ When the 2in1 is in Dual mode
The Outgoing number selection screen appears. Select a phone number.
To end the call, press y
3
N
<Videophone call>
z If you make a videophone call to an emergency
number (110, 119 or 118) from the FOMA terminal, the call is automatically changed to a voice call.
z You cannot receive i-mode mail or a MessageR/F
during a videophone call (you can receive SMS). Received mail is kept at the i-mode Center and can be retrieved using "Check new messages" after the videophone call.
z During battery charge, when you talk over the
videophone using the rear camera and record 1Seg at the same time, it may be possible that the videophone automatically turns into no camera talking after "Camera Off" message appears. It depends on how high the FOMA terminal is heated.
z Digital communication charges are still applied to the
caller when the substitute image is displayed during a videophone call.
You can use the videophone call function
Videophone
between terminals that support the DOCOMO videophone system.
z DOCOMO's Videophone is compliant with the
3G-324M*2 international standard established by the 3GPP Project that sets standards for 3rd generation mobile communications systems). Connections with videophones using different standards cannot be made.
*1: 3GPP (3rd Generation Partnership Project)
*2: 3G-324M
■How to view the videophone screen
1
3
4
① Main screen (Camera image of the other party
is displayed at the time of purchase)
② Sub-screen (Your own camera image is
displayed at the time of purchase)
③ Call duration ④ Settings
: Sending or receiving voice/
: Sending or receiving video/
: Sending camera image/substitute
: Handsfree ON/OFF
: Visual check in progress
: Photo mode (Portrait/Scenery/
: Key operation mode (DTMF
*1: "Send DTMF tone/DTMF tone OFF"→P. 4 *2: "Using Chara-den"→ P. 2 3
*1
(the 3rd Generation Partnership
A regional standardization body established to develop commonly applied technical specifications for 3rd-generation mobile communications systems (IMT-2000).
An international standard for 3rd-generation mobile videophones.
2
Transmission error
Transmission error
image/Chara-den
: Muting
Close-up)
*1
/Whole action mode*2/Parts
mode action mode
*2
)
Voice/Videophone Calls
3
Enter phone number screen (P.2)
Notify Caller ID→ P. 56
Prefix numbers→ P. 1 4
Chaku-moji→ P. 11
Voice/Videophone Calls
Int'l call→ P. 7
Multi Number→ P. 41 2
Add to phonebook→ P. 9 5
Compose message*→P. 2 0 0
Select image……Select Me/Chara-den for the image
used during a videophone call. Select "Release settings" to cancel the setting.
* : Not available when 2in1 is in B mode.
Videophone in-call screen (P.2)
Petit message→ P. 26
Decoration→ P. 2 6
Off decoration……Delete the displayed message or
stamp.
Substitute image ⇔My side……Switch between the
camera image and the substitute image.
Rear camera⇔ Front camera……Switch between the
front and rear cameras. This setting is only retained during the call.
Change main disp.……Change the main display.
The screen changes in the order of "Displaying the image from the other party's camera on your main screen" → "Displaying the image from your own camera on your main screen" → "Displaying only the image from the other party's camera" → "Displaying only the image from your own camera".
Visual check ⇔Visual check off……Check your
appearance with the front camera during a videophone call. Or ends checking. " " appears and the substitute image is sent to the other party during the visual check.
V.phone settings……Set the screen for videophone call.
Visual prefer.……Set the image sent to and
received from the other party from Normal/Prefer/
img qual/Prefer motion spd.
This setting is only retained during the call.
Brightness……Five brightness levels (-2 to 0 to +2)
are available.
White balance……Set image color tones.→P.159
This setting is also applied to the equivalent camera functions.
Color mode set……Select Normal/Sepia/ Monochrome as an image effect .
This setting is only retained during the call.
Photo mode……Set the mode suited to the scene
being shot. →P.159 This setting cannot be set for the front camera.
Chara-den set.……You can set the following when
Chara-den is used. This setting cannot be set for the camera images.
Switch Chara-den
Action List
Change Action
Switch image……Display the image selected in
"Substitute image" (P.24) on the other party's display.
Display light……Set lighting of backlight.
All time ON (default)
Same as backlight……Light according to Lighting
in Display light.
FrontCamera Rev.……Set whether to display your
camera image as a mirror image (ON) or normal image (OFF) on the FOMA terminal during a call.
Own number……Display your phone number during a
videophone call.
Send DTMF tone⇔ DTMF tone OFF……Set/Cancel
push signal transmission mode during Chara-den. Except for Chara-den, videophone calls are always in push signal transmission mode.
Change to voice→ P. 5
Loc. notification→P. 2 7 0
● If a videophone call is not connected
When a videophone call is not connected, the cause of the failure appears.
z The cause may not appear depending on the
situation.
z Depending on the type of other party's phone or
the possible lack of a network service subscription, the reason may not accurately reflect the other party's actual status.
Display Cause
Check number then redial
Busy The line is busy
The called phone number is not used
• This message may also appear during packet communication, depending on the other party's terminal.
4
X
X
Display Cause
Busy with packet transmission
Out of service area/ power off
Your call is being forwarded
Redial using voice call
Please activate caller ID before dialing again
This number is not available
Upper limit has been exceeded Connection failed
Connection failed Set the Caller ID Notification to
Please make your call from the i-mode web page
The other party is using packet communication
The other party is out of service area or the phone is turned off
The call is being forwarded (A Videophone call is made when the forwarding number is for a 3G-324M-compatible videophone)
The phone for the forwarding number is not compatible with videophone calls
The other party has set the Caller ID request service
The other party has set the Nuisance call blocking service
The upper limit set for a Limit billing plan (Type Limit and Family Wide Limit) is exceeded
"ON" and retry
• This message may also appear in other situations
You connected without notifying your caller ID (when dialing into visualnet, etc.)
You attempted to make a videophone call to watch V-live without browsing the i-mode official site
z If the videophone call is not supported, your call is
automatically switched to a voice call when you set "Auto redial as voice" to "ON". However, the call may not be handled in this way if you call an ISDN synchronous 64K access point, ISDN videophone which does not support the 3G-324M standard (as of May, 2008) or if you dial a wrong number. Note that call charges may be applied in some cases.
Switching a Voice/ Videophone Call during a Call (Caller)
z You can use this function with terminals compatible
with voice call/videophone call switch.
z You can switch the voice call only when you are the
caller.
z To switch the call, the receiver needs to set "Ntfy
switch-mode" to notify of the switch beforehand. →P. 2 4
<Example: To switch a voice call to a videophone call>
In-call screen (P.2)
1
"YES"
During switching, the screen which indicates that the calls are being switched appears and voice guidance is played.
Digital communication fee is charged after the appearance of this screen.
■ To switch a videophone call to a voice call
XVideophone in-call screen (P.2)X
(FUNC)X"Change to voice"
N
z It takes about 5 seconds to switch the calls. Note that
the signal quality may affect how long it takes.
z You cannot switch the calls during calling in the
following cases:
• When the other party is holding the call
• When the other party activates Record message
d (V.phone)
u
Voice/Videophone Calls
Continued on next page
5
N
z The displayed call duration is reset to 0 second each
time the calls are switched. However, the total time for a voice and videophone call is displayed after ending the call.
z Depending on the other party's communication
conditions or the signal quality, you may not be able to switch the calls and the call may be canceled.
Voice/Videophone Calls
z When the call is switched, the first dialed or received
call is registered to the Redial/Dialed calls records or Received calls records.
<When switching from voice call to videophone call>
z If the caller is using i-mode, the i-mode
communication is canceled to switch to videophone.
z If the other party is using packet communication
(including i-mode), you receive the message "No Switch" meaning you cannot switch the calls.
z You cannot switch the calls when "Call Waiting" is
activated.
Making International Calls
<WORLD CALL>
WORLD CALL is an international dialing service that can be used from DOCOMO mobile phones. FOMA service subscribers are also subscribed to "WORLD CALL" when they subscribe to the FOMA service (However, this excludes subscribers who stated that they did not require the service.).
z You can make a call to approximately 240 countries
and regions worldwide.
z "WORLD CALL" is charged with your monthly
FOMA call charges.
z In addition to directly dialing a phone number, you
can make an international call by adding "+" or selecting "Int'l call" or “Prefix numbers" from the function menu in the enter phone number screen or detail screens of the Phonebook/Redial/Dialed calls/Received calls.
z This service is not available with some payment
plans.
For additional information regarding WORLD CALL, call the number for general inquiries provided on the back of the manual.
"International videophone calls" can be made to users of some specific overseas 3G mobile terminals by pressing call after using the dialing procedure below.
z See the DOCOMO website for information such as
accessible countries and operators.
z Depending on the other party's terminal, the image
of the other party displayed on your FOMA terminal may be distorted or the connection may fail when making an international videophone call.
o (V.phone) to make the
Dialing a phone number to make an international call
Dial the phone number in the following
1
order: 010 → country code → area code (long distance code) → other party's phone number
If the area code (long distance code) begins with "0", omit the first "0". However, to call fixed-line phones in Italy, "0" is required. You can also make an international call by dialing the phone number in the following order: 009130 → 010 → country code → area code (long distance code) → other party's phone number.
r
2
The international call is made.
Simple procedures for making international calls
z You can store the country codes and IDD prefix
codes in "Int'l dial assistance settings".
● Using "+" to make an international call
You can make an international call without dialing the IDD prefix code by using "+", which is automatically replaced by the IDD prefix code set for the "Auto int'l call set".
z Since "Auto int'l call set." in "Int'l dial assistance
settings" is set to "ON" (automatically added) at the time of purchase, the FOMA terminal automatically dials the IDD prefix code.
6
On the standby screen, dial the
X
X
1
following: + (0 for 1 second or longer) → country code → area code (long distance code) → other party's phone number
If the area code (long distance code) begins with "0", omit the first "0". However, to call fixed-line phones in Italy, "0" is required.
r
X
2
"Dial"
The international call is made.
■ To make a call without converting "+" into
the IDD prefix code
X"Original Phone No."
■ To cancel the call
X"Cancel"
● Making an international call from the
function menu
You can make an international call by adding a country code and IDD prefix code from the function menu.
z You can use the international dial function from the
“Enter phone number screen” and the detail screens of Phonebook/Received calls/Dialed calls/ Redial.
<Example: To use the international dial function from the enter phone number screen>
Enter the phone number of the other
1
party u (FUNC)
2
Country codeXSelect the IDD Prefix
"Int'l call"XSelect the
code
The selected country code and IDD prefix code are added. If the area code (long distance code) begins with "0", the first "0" is automatically deleted (except when “Italy” is selected for the country code).
r
3
The international call is made.
Making the setting international calls
You can set the automatic conversion of "+", and also edit and store the country codes and IDD prefix code for international calls.
i
"Settings"X"Dialing"X"Int'l dial
1
assistance"XSelect any item:
Auto int'l call set.……Set the automatic conversion
of "+" for when you make an international call.
X"ON"XSelect a Country codeXSelect an IDD
Prefix code
■ When you do not want to convert
automaticallyX"OFF"
Country Code setting……
Store up to 22 country names and country codes to use when you make an international call. See the DOCOMO website for information on country codes.
XHighlight an itemX
(Edit)XEnter the country nameXEnter the country code
IDD Prefix setting……Store
the IDD prefix name and IDD prefix code to use when you make an international call. You can store up to 3 entries.
XHighlight an item to be
stored or changedX (Edit) XEnter the IDD prefix name XEnter the IDD prefix code
<Int'l dial assistance settings>
o
Country code setting
Function menu¨P. 7
o
IDD prefix setting
Function menu¨P. 1 3
Country code setting screen (P.7)
Edit
Delete……Select Delete this/Delete selected/Delete all.
Voice/Videophone Calls
7
Using Handsfree Call during a
X
X
Call
You can hear the other party's voice from the speaker while talking.
In-call screen (P.2)
Voice/Videophone Calls
1
" " appears and you can hear other party's voice through a speaker during a handsfree call.
While your terminal is ringing, you can switch to the handsfree operation by pressing (/).
■ To cancel the handsfree operation
XPress
" " disappears when you make a voice call or PushTalk call. " " is changed to " " in the case of a videophone.
● Notes on using the handsfree operation
It is recommended to keep a distance of about 30 cm from the FOMA terminal during a handsfree call. If the distance is longer or shorter than 30 cm, the other party may find it difficult to hear you or your voice may sound differently.
N
z Move to an area where your call will not disturb other
people before switching to a handsfree call.
z When a call is finished, the handsfree setting is
canceled.
Ex. voice call Ex. videophone call
o ( ) during a handsfree call
<Hands-free>
o ()
o
Using the Redial/Dialed Calls/ Received Calls Record
<Redial/Dialed calls/Received calls>
Information on dialed or received calls, including the caller's phone number and the date and time are stored in the Redial/Dialed calls/Received calls record. You can make a call to the other party easily by using these records.
z When you make calls to the same phone number
repeatedly, the latest entry is stored as the Redial record and separate entries are stored for the Dialed calls record.
z The Redial record can hold up to 30 phone
numbers for voice calls, videophone calls, and PushTalk calls.
z The Dialed calls/Received calls record stores up to
30 voice call, videophone call, and PushTalk call entries and 30 packet communication and 64K data communication entries.
z If the maximum number of entries is exceeded,
entries are overwritten starting with the oldest one.
z About Redial/Dialed Calls/Received Calls Record
of PushTalk→P. 8 7
<Example: To make a call from the Redial/Received calls list screen>
On the standby screen
1
h (Received calls)
■ To check Dialed calls
X
iX"Own data"X
"Dialed calls"
Highlight the Redial/Received calls
2
record entry
■ To make a call after
checking the details of the Redial/Received calls record
XSelect the Redial/
Received calls record entry
j (Redial)/
Ex. Redial (list)
Function menu¨P. 9
Ex. Redial (detail)
Function menu¨P. 9
8
r (voice call), o (V.phone), @
3
(PushTalk)
● Checking the number of missed calls
■ To confirm only the missed calls from the
Received calls record
iX"Own data"X"Received calls"
X
The total number of received calls, the number of missed calls and the number of unconfirmed missed calls appear. When you select "Missed calls", only the missed calls appear.
■Redial/Dialed calls/Received calls record icons
*1
Icon
//
//
//
//
//
//
*2
/
・ /
/
//
Description
Incoming and outgoing/missed/ unconfirmed missed voice calls
Incoming and outgoing/missed/ unconfirmed missed international voice calls
Incoming and outgoing/missed/ unconfirmed missed videophone calls
Incoming and outgoing/missed/ unconfirmed missed international videophone calls
Incoming and outgoing/missed/ unconfirmed missed PushTalk calls (one-to-one communication)
Incoming and outgoing/missed/ unconfirmed missed PushTalk calls (communication with multiple parties)
Incoming and outgoing calls to B mode for 2in1 setting
Recorded voice record message/ videophone message
Received calls with Chaku-moji
Incoming and outgoing/missed/ unconfirmed missed packet communication
Incoming and outgoing/missed/ unconfirmed missed 64K data communication
Incoming packet communication or 64K data communication that is received without an external device connected
*1
Icon
*1: Some icons look different between the detail screen and
the list screen.
*2: Displayed only when the 2in1 is in Dual mode.
Description
Incoming and outgoing calls when the Time zone is other than "GMT+09" regardless of the "Auto time adjust" setting (the summer time is displayed when you set the summer time)
N
z When you use 2in1, up to 30 records are stored for
each phone number. Also, when set to Dual mode, up to 30 Redial/Dialed calls/Received calls records for both phone numbers and a total of the 60 records are displayed.
<Redial/Dialed calls>
z Setting "Restrict dialing" deletes all the Redial/Dialed
calls records.
z If you make a call by selecting Multi number from the
function menu, the registered name and number of the additional number are displayed under the phone number in the Redial screen (detail)/Dialed calls record screen (detail). If you make a call without using the function menu, nothing is displayed even when "Set Multi Number" is set to additional number.
<Received calls>
z When "Missed calls display" in the "Ring time (sec.)" is
set to "Not display" and you receive a call of which ring tone sounded for a shorter time than the time set in the "Set mute seconds", the call is not displayed on the Received calls record.
z If the caller is using "Dial-in", a number different from
the "Dial-in" number may be displayed.
z If the same phone number is registered in multiple
phonebook entries with different names, the name retrieved by the phonebook search in the order of reading is displayed in the Received calls record. →P. 98
z When you have subscribed to Multi number and make
a call from the Received calls record screen, the phone call is made from the number which received the call regardless of the "Set Multi Number" setting.
z When you receive a call for the additional num ber of
Multi number, the registered name of the additional number is displayed under the phone number in the Received calls record screen (detail).
Redial/Dialed calls/Received calls screen (P.8)
Notify Caller ID*1→P. 56
Prefix numbers
Chaku-moji
*1*2
*1*2
→P. 11
→P. 14
Voice/Videophone Calls
Continued on next page
9
Loading...
+ 19 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use