NEC of America 7N2N13B Users Manual

Making a Voice/Videophone Call

Dial the other party’s number, starting with the area code

1

The “Phone number entry” screen appears.
Always start with the area code, even for calls within the same area.

Area code Local code

A number of up to 80 digits can be entered for making a call although the numbers disappear from the display
one by one from the beginning after the number exceeds 26 digits.

r

2

The phone number disappears briefly and then reappears from the right as it is dialed.
The “ ” icon flashes during dialing and remains lit during a call.
The “FOMA voice in-call” screen appears.

■ To switch to a videophone call during a voice call

"Changing a call from voice to videophone"→p. 3

■ If you hear the busy tone

The line is busy. Press y, and call again after a while.

■ If you hear the message saying that the other party cannot be reached

The other party's mobile phone or PHS phone is not switched on or is out of signal range. Press y , and
call again after a while.

■ If you hear the message requesting your caller ID

The other party has set the Caller ID Request service to "Activate". Call again with your caller ID shown.

■ If you set "2in1 setting" to "Dual mode"

The outgoing number selection screen appears. Select a phone number.

To end the call, press y

3

d Making a videophone call

Phone number entry screen

1

The "Videophone in-call" screen appears.
You can talk hearing the other party's voice through the speaker.
The " " icon flashes during dialing and remains lit during a videophone call.

■ To switch to a voice call during a videophone call

"Changing a call from videophone to voice"→p. 3

■ To switch between camera image and substitute image during a videophone call

XSelect "Substitute image" or "My side" from the function menu.

■ To mute voice to send during a videophone call (microphone mute)

X

a (1 second or longer)

" " appears while in mute. Video is transmitted as it is.
To cancel mute, press a again for 1 second or longer.

To end the call, press y

2

Phone number

−−

Xo

()

Ｖｐｈｏｎｅ

．

Making/Receiving Calls

1

d If you entered a wrong phone number

■ To insert a number

Press h or j to move highlight to the number on the left of the insert position and enter the number.

■ To delete a number

Press h or j to move highlight to the number to delete and press t.
Pressing

t for 1 second or longer deletes the highlighted number and all numbers on the left side of the

highlighted number.

■ To reenter a number

Move highlight to the beginning or end of the number and press t for 1 second or longer to return to the
standby screen.

d If a videophone call is not connected

If a videophone call is not connected, a message giving the reason for the connection failure appears.
However, in some circumstances, an explanatory message may not be displayed. Also, depending on
the type of phone used by the other party and the possible lack of a network service subscription, the
reason given may not accurately reflect the other party's actual status.

Message Reason

Check number then redial The dialed phone number is currently not used.

*

Busy

Busy with packet transmission Packet communication is in progress on the other party.

Out of ser vice area/power off The other party's phone is out of service or the power is turned off.

Set caller ID to ON

Your call is being forwarded The call is being forwarded (into a videophone call if the forwarding

Redial using voice call The forwarded party is non-videophone-terminal.

Please activate caller ID before dialing again The Caller ID Request service is set on the other par ty.

At the user's request, your call can not be connected The Nuisance Call Blocking service is set on the other party.

Upper limit has been exceeded Connection failed The upper limit set for a Limit billing plan (Type Limit and Family

Connection failed Set "Caller ID Notification" to "ON" and then try again.

Please make your call from the i-mode web page You attempted to make a videophone call to watch V-live without

*: This message may also appear during packet communication depending on the type of other party's terminal.

The line is busy.

The call is connected without showing your caller ID (when dialing visualnet).

party has a videophone that complies with 3G-324M).

Wide limit) is exceeded.

a This message may also be displayed in other situations.

browsing the i-mode official site.

Making/Receiving Calls

2

Changing a Call from FOMA Voice to Videophone

d You can only change the call mode when you are the caller. When you are a callee, you cannot change the

call mode.

d You can repeatedly change the call mode between voice and videophone.

d Changing a call from voice to videophone

You can change the call mode during a voice call you dialed.

d If the other party uses a FOMA terminal that can change the call mode, " " appears during a voice

call and you can change the call mode between voice and videophone. (This function is available between
terminals that support change between voice call and videophone call.)

Ｖｐｈｏｎｅ

In-call screenXd ()X"YES"

1

While a voice call is being changed to a videophone call, the screen showing that the call mode is being
changed appears and the voice guidance is given.
Select "NO" on the "Ntfy switch-mode" message screen to return to the in-call screen.

．

Ｖｐｈｏｎｅ

．

d Changing a call from videophone to voice

The caller can change the call mode to voice during a videophone call.

d If the handset of other party is a FOMA terminal supporting the call change, "Change to voice" can be

selected from the function menu during a videophone call and you can change the call mode. (This
function is available between terminals that support change between voice call and videophone call.)

Videophone in-call screenX[ch] (FUNC)X"Change to voice"

1

While the call mode is being changed from videophone to voice, the screen showing that the call mode is
being changed appears and the voice guidance is given.

<WORLD CALL>

Making International Calls

WORLD CALL is an international dialing service available for DoCoMo mobile phones.
FOMA service subscribers have also subscribed to "WORLD CALL" (excluding those who indicated
that they did not require the service).
* This service is unavailable with some billing plans.

d WORLD CALL is available for calls to around 240 countries and regions worldwide.
d WORLD CALL is included in the bill for your monthly call charges.
d In addition to dialing a phone number, you can make an international call by adding "+" or selecting "Int'l

call" or "Prefix numbers" from the function menu on the phone number entry, Redial/Dialed calls, Received
calls or phonebook detail screen.

Changes to the international dialing procedure

Since communication from mobile devices such as mobile phones is not covered by the "MY LINE"
service, this service cannot be used to access WORLD CALL. However, with the introduction of the
"MY LINE" service, the procedure used to make international calls from a mobile phone has changed.
Note that the conventional dialing procedure (the one described below with "010" removed) can no
longer be used.

For additional information regarding WORLD CALL, refer to the contact information provided on the back cover of this
manual.

“International videophone calls” can be made to users of some specific overseas 3G mobile terminals by pressing

Ｖ．ｐｈｏｎｅ

o ( ) to make a call after following the dialing procedure below.

c See the DoCoMo website for information about accessible countries and carriers.
c Depending on the type of the phone used by the other party, the other party’s image shown on your FOMA

terminal may be distorted during an international videophone call or the connection may fail.

Making/Receiving Calls

3