NEC UPC3207GR, UPC3207GR-E1 Datasheet

DATA SHEET

BIPOLAR ANALOG INTEGRATED CIRCUIT

PC3207GR

FREQUENCY DOWN CONVERTER FOR

VHF TO UHF BAND RECEIVER

DESCRIPTION

The µPC3207GR is a Silicon monolithic IC designed for receiver applications. This IC consists of a double balanced mixer (DBM), local oscillator, preamplifier for precscaler operation, IF amplifier, regulator, UHF/VHF switching circuit, and so on. This one-chip IC covers a wide frequency band from VHF to UHF bands. This IC is packaged in 20-pin SSOP (Shrink Small Outline Package) suitable for surface mounting.

FEATURES

• VHF to UHF bands operation.

• Low distortion CM: VHF (@fRF = 470 MHz) 96 dB

UHF (@fRF = 890 MHz) 92 dB

• Supply voltage : 9 V

• Packaged in 20-pin SSOP suitable for surface mounting

µ µ

APPLICATIONS

• Tuners for TV and VCR

• Receivers for VHF to UHF bands

ORDERING INFORMATION

Part Number Package Supplying Form

PC3207GR-E1 20-pin plastic SSOP (225 mil) Embossed tape 12 mm wide.

Pin 1 indicates pull-out direction of tape. Qty 2.5 kp/reel.

To order evaluation samples, please contact your local NEC office. (Part number for sample order: µPC3207GR)

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.

Document No. P13717EJ3V0DS00 (3rd edition) Date Published October 1999 N CP(K) Printed in Japan

Caution electro-static sensitive device

The mark shows major revised points.

1998,1999

INTERNAL BLOCK DIAGRAM AND PIN CONFIGURATION (TOP VIEW)

PC3207GR

U OSC C1

U OSC B2

U OSC B1

U OSC C2

OSC OUT

GND

V OSC B1

V OSC B2

V OSC C1

REG

URF IN

GND

VRF IN

MIX OUT

IF OUT

REG

Data Sheet P13717EJ3V0DS00

PIN EXPLANATION

4 213

Pin No. Symbol Function and Explanation Equivalent Circuit

1 UOSC collector Collector pin of UHF oscillator with balance

(Tr. 1) amplifier. Assemble LC resonator with 2

pin through capacitor ~ 1 pF to oscillate with active feedback loop.

2 UOSC base Base pin of UHF oscillator with balance

(Tr.2) amplifier. Connected to LC resonator

3 UOSC base

(Tr. 1)

4 UOSC collector Collector pin of UHF oscillator with balance

(Tr. 2) amplifier. Assemble LC resonator with 2

5 UB Switching pin for VHF or UHF operation.

6 OSC output UHF and VHF oscillator output pin. In case

through feedback capacitor ~ 360 pF.

pin through capacitor ~ 1 pF to oscillate with active feedback loop. Double balanced oscillator with transistor 1 and transistor 2.

VHF operation = open UHF operation = 9.0 V

of F/S tuner application, connected PLL symthesizer IC’s input pin. Grounded through 1.5 kΩ resistor.

PC3207GR

1.5 k

* External element

7 GND GND pin of VHF and UHF oscillator. 8 VOSC base Base pin of VHF oscillator.

(Tr. 1) Grounded through capacitor ~ 10 pF.

9 VOSC base Base pin of VHF oscillator.

(Tr. 2) Assemble LC resonator with 10 pin to

oscillate with active feedback loop.

10 VOSC collector Collector pin of VHF oscillator.

(Tr. 1) Connected to LC resonator through

feedback capacitor ~ 3 pF.

Data Sheet P13717EJ3V0DS00

Pin No. Symbol Function and Explanation Equivalent Circuit

11 REG Monitor pin of regulator output voltage. 12 IF output IF signal output pin of VHF-UHF band

functions.

13 VCC Power supply pin for VHF-UHF band

functions.

14 MIX VHF and UHF MIX output pins.

output1 These pins should be equipped with tank

15 MIX

output2

16 VRF input Bypass pin for VHF MIX input.

(bypass) Grounded through capacitor.

circuit to adjust intermediate frequency.

PC3207GR

14 15

1617

17 VRF input VRF signal input pin.

18 GND GND pin of MIX, IF amplifier and

regulator.

19 URF input Bypass pin for UHF Mü\œinput.

(bypass) Grounded through capacitor.

20 URF input URF signal input pin.

14 15

2019

Data Sheet P13717EJ3V0DS00

PC3207GR

ABSOLUTE MAXIMUM RATINGS (TA = +25 °C UNLESS OTHERWISE SPECIFIED)

Parameter Symbol Condition Rating Unit Supply Voltage 1 VCC 11.0 V Supply Voltage 2 UB 11.0 V Power Dissipation PD TA = 75 °C Operating Ambient Temperature TA –40 to +75 °C Storage Temperature Tstg –60 to +150 °C

Note

500 mW

Note Mounted on 50 × 50 × 1.6 mm double epoxy glass board.

RECOMMENDED OPERATING RANGE

Parameter Symbol MIN. TYP. MAX. Unit Supply Voltage 1 VCC 8.0 9.0 10.0 V Supply Voltage 2 UB 8.0 9.0 10.0 V Operating Ambient Temperature TA –20 +25 +75 °C

Data Sheet P13717EJ3V0DS00

ELECTRICAL CHARACTERISTICS (TA = +25 °C, VCC = 9 V, fIF = 45 MHz, fOSC = fRF + 45 MHz, POSC = –10 dBm)

Parameter Symbol Test Conditions MIN. TYP. MAX. Unit Circuit Current 1 ICC1 @VHF, no input signal Circuit Current 2 ICC2 @UHF, no input signal Conversion Gain 1 CG1 VHF, fRF = 55 MHz, PRF = –30 dBm Conversion Gain 2 CG2 VHF, fRF = 200 MHz, PRF = –30 dBm Conversion Gain 3 CG3 VHF, fRF = 470 MHz, PRF = –30 dBm Conversion Gain 4 CG4 UHF, fRF = 470 MHz, PRF = –30 dBm Conversion Gain 5 CG5 UHF, fRF = 890 MHz, PRF = –30 dBm Noise Figure 1 NF1 VHF, fRF = 55 MHz Noise Figure 2 NF2 VHF, fRF = 200 MHz Noise Figure 3 NF3 VHF, fRF = 470 MHz Noise Figure 4 NF4 UHF, fRF = 470 MHz Noise Figure 5 NF5 UHF, fRF = 890 MHz Maximum Output Power 1 Po (sat)1 VHF, fRF = 55 MHz, PRF = 0 dBm Maximum Output Power 2 Po (sat)2 VHF, fRF = 200 MHz, PRF = 0 dBm Maximum Output Power 3 Po (sat)3 VHF, fRF = 470 MHz, PRF = 0 dBm Maximum Output Power 4 Po (sat)4 UHF, fRF = 470 MHz, PRF = 0 dBm Maximum Output Power 5 Po (sat)5 UHF, fRF = 890 MHz, PRF = 0 dBm

Notes 1, 2

Note 3

Note 4

Note 3

31.0 38.0 45.0 mA

18.5 22.0 25.5 dB

24.5 28.0 31.5 dB

24.5 28.0 31.5 dB — 11.0 14.0 dB — 11.0 14.0 dB — 11.0 14.0 dB — 9.5 12.5 dB — 10.0 13.0 dB

7.0 10.0 — dBm

PC3207GR

Notes 1. no resistance of OSC output

2. By measurement circuit 1

3. By measurement circuit 2

4. By measurement circuit 3

Data Sheet P13717EJ3V0DS00

+ 14 hidden pages