NEC UM330Xi-WK1, UM330X-WK1, UM330X, UM330Wi-WK1, UM330W-WK1 User Manual

Portable Projector

UM330X/UM280X/

UM330W/UM280W

User’s Manual

The UM280X and UM280W are not distributed in North America.

Model No.

NP-UM330X, NP-UM280X, NP-UM330W, NP-UM280W

Ver. 1/09/12

•Apple, Mac, Mac OS, MacBook, and iMac are trademarks of Apple Inc. registered in the U.S. and other countries.

•Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

•Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries.

•PowerPC is a registered trademark of the International Business Machines Corporation.

•MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands.

•Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd.

•HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

•Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other countries and areas.

•Wi-Fi®, Wi-Fi Alliance®, and Wi-Fi Protected Access (WPA, WPA2)® are registered trademarks of the Wi-Fi Alliance.

•Blu-ray is a trademark of Blu-ray Disc Association

•CRESTRON and ROOMVIEW are registered trademarks of Crestron Electronics, Inc.in the United States and other countries.

•Other product and company names mentioned in this user’s manual may be the trademarks or registered trademarks of their respective holders.

•GPL/LGPL Software Licenses

The product includes software licensed under GNU General Public License (GPL), GNU Lesser General Public License (LGPL), and others.

For more information on each software, see “readme.pdf” inside the “about GPL&LGPL” folder on the supplied CDROM.

NOTES

(1)The contents of this user’s manual may not be reprinted in part or whole without permission.

(2)The contents of this user’s manual are subject to change without notice.

(3)Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us.

(4)Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

Important Information

Safety Cautions

Precautions

Please read this manual carefully before using your NEC projector and keep the manual handy for future reference.

CAUTION

To turn off main power, be sure to remove the plug from power outlet.

The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET.

THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock.Therefore, it is dangerous to make any kind of contact with any part inside of the unit.

This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided.

The information should be read carefully to avoid problems.

WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

DO NOT USETHIS UNIT’S PLUGWITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALLTHE PRONGS CAN BE FULLY INSERTED.

DOC Compliance Notice (for Canada only)

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Machine Noise Information Regulation - 3. GPSGV,

The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.

CAUTION

Avoid displaying stationary images for a prolonged period of time.

Doing so can result in these images being temporarily sustained on the surface of the LCD panel.

If this should happen, continue to use your projector. The static background from previous images will disappear.

Disposing of your used product

EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes projectors and their electrical accessories or lamps.When you dispose of such products, please follow the guidance of your local authority and/or ask the shop where you purchased the product.

After collecting the used products, they are reused and recycled in a proper way. This effort will help us reduce the wastes as well as the negative impact such as mercury contained in a lamp to the human health and the environment at the minimum level.

The mark on the electrical and electronic products only applies to the current European Union Member States.

i

Important Information

WARNING TO CALIFORNIA RESIDENTS:

Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.WASH HANDS AFTER HANDLING.

RF Interference (for USA only)

WARNING

The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio / TV technician for help.

For UK only: In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier.

Important Safeguards

These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation

•Do not place the projector in the following conditions:

-on an unstable cart, stand, or table.

-near water, baths, or damp rooms.

-in direct sunlight, near heaters, or heat radiating appliances.

-in a dusty, smoky or steamy environment.

-on a sheet of paper or cloth, rugs or carpets.

•If you wish to have the projector installed on the ceiling:

-Do not attempt to install the projector yourself.

-The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury.

-In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes.

-Please consult your dealer for more information.

ii

Important Information

WARNING

•Do not place any objects, which are easily affected by heat, in front of the projection window. Doing so could lead to the object melting from the heat that is emitted from the light output.

Place the projector in a horizontal position

The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.

+10˚ −10˚

Fire and Shock Precautions

•Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.

•Do not try to touch the exhaust vent as it can become heated while the projector is turned on and immediately after the projector is turned off. Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation.

Use caution when picking up the projector.

•Prevent foreign objects such as paper clips and bits of paper from falling into your projector.Do not attempt to retrieve any objects that might fall into your projector.Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel.

•Do not place any objects on top of the projector.

•Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.

•The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply fits this requirement before attempting to use your projector.

•Do not look into the projection window while the projector is on. Serious damage to your eyes could result.

•Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the projection window is extensive, therefore any kind of abnormal objects that can redirect light coming out of the projection window, can cause unpredictable outcome such as fire or injury to the eyes.

•Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent.

Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the exhaust.

•Do not splash water over the projector. Doing so can cause electrical shock or fire. If the projector gets wet, turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel.

•Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fire. - Do not use any power cord other than the one supplied with the projector.

iii

Important Information

-Do not bend or tug the power cord excessively.

-Do not place the power cord under the projector, or any heavy object.

-Do not cover the power cord with other soft materials such as rugs.

-Do not heat the power cord.

-Do not handle the power plug with wet hands.

•Turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel under the following conditions:

-When the power cord or plug is damaged or frayed.

-If liquid has been spilled into the projector, or if it has been exposed to rain or water.

-If the projector does not operate normally when you follow the instructions described in this user’s manual.

-If the projector has been dropped or the cabinet has been damaged.

-If the projector exhibits a distinct change in performance, indicating a need for service.

•Disconnect the power cord and any other cables before carrying the projector.

•Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.

•Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time.

•When using a LAN cable (only models with the RJ-45 LAN port):

For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.

CAUTION

•Be sure to tighten the screws after attaching the cable cover.Failure to do so may cause the cable cover to come off and fall, resulting in injury or damage to the cable cover.

•Do not put bundled cables in the cable cover. Doing so may damage the power cord, resulting in a fire.

•Do not hold the cable cover while moving the projector or do not apply excessive force to the cable cover. Doing so may damage the cable cover, resulting in injury.

•Do not use the feet for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector.

•Do not send the projector in the soft case by parcel delivery service or cargo shipment.The projector inside the soft case could be damaged.

•Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [SETUP] → [OPTIONS(1)] → [FAN MODE] → [HIGH].)

•Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is blinking blue. Doing so could cause premature lamp failure.

Remote Control Precautions

•Handle the remote control carefully.

•If the remote control gets wet, wipe it dry immediately.

•Avoid excessive heat and humidity.

•Do not short, heat, or take apart batteries.

•Do not throw batteries into fire.

•If you will not be using the remote control for a long time, remove the batteries.

•Ensure that you have the batteries’ polarity (+/−) aligned correctly.

•Do not use new and old batteries together, or use different types of batteries together.

•Dispose of used batteries according to your local regulations.

iv

Important Information

Note for US Residents

The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws.

Lamp Replacement

•Use the specified lamp for safety and performance.

•To replace the lamp, follow all instructions provided on page 120.

•Be sure to replace the lamp and filter when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER.] appears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.

If this happens, contact your dealer for lamp replacement.

A Lamp Characteristic

The projector has a high-pressure mercury lamp as a light source.

A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on and off will increase the possibility of its lower brightness.

The actual lamp life may vary depending upon the individual lamp, the environmental conditions and usage.

CAUTION:

•DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling.

•When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass fragments could fall if the lamp has been burned out.

About High Altitude mode

•Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters or higher.

Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.

•Using the projector at altitudes less than approximately 5500 feet/1700 meters and setting to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].

•Using the projector at altitudes approximately 5500 feet/1700 meters or higher can shorten the life of optical components such as the lamp.

About Copyright of original projected pictures:

Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with the following functions may raise concern about the infringement of copyrights which are protected by copyright law.

[ASPECT RATIO], [KEYSTONE], Magnifying feature and other similar features.

Turkish RoHS information relevant for Turkish market

EEE Yonetmeliğine Uygundur.

This device is not intended for use in the direct field of view at visual display workplaces.To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view.

v

Table of Contents

Important Information............................................................................................	i
1. Introduction...........................................................................................................	1
1 What’s in the Box?..........................................................................................................	1
Introduction to the Projector...........................................................................................	2
Features you’ll enjoy:................................................................................................	2
About this user’s manual..........................................................................................	3
Part Names of the Projector...........................................................................................	4
Top and Screen Side of Projector.............................................................................	4
Terminal Panel Side of Projector..............................................................................	4
Removing and Attaching the Cable Cover................................................................	5
Top Features.............................................................................................................	7
Terminal Panel Features...........................................................................................	8
Part Names of the Remote Control................................................................................	9
Battery Installation..................................................................................................	10
Remote Control Precautions..................................................................................	10
Operating Range for Wireless Remote Control......................................................	10
Operating Environment for Software Included on CD-ROM.........................................	11
Operating Environment...........................................................................................	12
2. Projecting an Image (Basic Operation)...............................................	14
Flow of Projecting an Image.........................................................................................	14
Connecting Your Computer/Connecting the Power Cord.............................................	15
Turning on the Projector...............................................................................................	16
Note on Startup screen (Menu Language Select screen)......................................	17
Selecting a Source.......................................................................................................	18
Selecting the computer or video source.................................................................	18
Adjusting the Picture Size and Position........................................................................	19
Adjusting horizontal/vertical position......................................................................	20
Adjusting the focus (Focus ring).............................................................................	20
Adjusting the tilt (Tilt foot).......................................................................................	21
Finely adjusting the vertical tilt...............................................................................	21
Adjusting the size [Digital Zoom]............................................................................	22
Correcting Keystone Distortion Manually.....................................................................	23
Adjusting with buttons on the cabinet.....................................................................	23
Adjusting with the remote control...........................................................................	24
Optimizing Computer Signal Automatically..................................................................	25
Adjusting the Image Using Auto Adjust..................................................................	25
Turning Up or Down Volume.........................................................................................	25
Turning off the Projector...............................................................................................	26
When Moving the Projector..........................................................................................	27
3. Convenient Features......................................................................................	28
1 Turning off the Image and Sound.................................................................................	28
2 Freezing a Picture........................................................................................................	28
Enlarging a Picture.......................................................................................................	28
Changing Eco Mode/Checking Energy-Saving Effect .................................................	29

vi

Table of Contents
Using Eco Mode [ECO MODE]...............................................................................	29
Checking Energy-Saving Effect [CARBON METER]..............................................	30
5 Preventing the Unauthorized Use of the Projector [SECURITY]..................................	31
Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool)......	34
Operating Your Computer’s Mouse Functions from the Projector’s Remote Control
via the USB Cable (Remote Mouse Function)........................................................	40
Projecting Your Computer’s Screen Image from the Projector via the USB Cable
(USB Display).........................................................................................................	41
Controlling the Projector by Using an HTTP Browser..................................................	43
Controlling the Projector over a LAN (PC Control Utility Pro 4/Pro 5)..........................	50
Projecting Your Computer’s Screen Image from the Projector over a LAN (Image
Express Utility Lite).................................................................................................	54
Starting Image Express Utility Lite from a USB Memory or SD Card.....................	57
Projecting an Image from an Angle (Geometric Correction Tool in Image Express
Utility Lite)...............................................................................................................	59
What you can do with GCT.....................................................................................	59
Projecting an Image from an Angle (GCT).............................................................	59
Connecting Your Microphone.......................................................................................	61
4. Using the Viewer..............................................................................................	62
What you can do with the Viewer.................................................................................	62
Projecting images stored in a USB memory device.....................................................	64
3 Converting PowerPoint files to Slides (Viewer PPT Converter 3.0)..............................	70
5. Using On-Screen Menu................................................................................	73
Using the Menus..........................................................................................................	73
2 Menu Elements............................................................................................................	74
3 List of Menu Items........................................................................................................	75
4 Menu Descriptions & Functions [SOURCE].................................................................	78
COMPUTER...........................................................................................................	78
HDMI1 and 2..........................................................................................................	78
VIDEO....................................................................................................................	78
S-VIDEO.................................................................................................................	78
VIEWER.................................................................................................................	78
NETWORK.............................................................................................................	78
USB DISPLAY........................................................................................................	78
5 Menu Descriptions & Functions [ADJUST]..................................................................	79
[PICTURE]..............................................................................................................	79
[IMAGE OPTIONS].................................................................................................	82
6 Menu Descriptions & Functions [SETUP]....................................................................	86
[GENERAL]............................................................................................................	86
[MENU]...................................................................................................................	88
[INSTALLATION].....................................................................................................	90
[OPTIONS(1)].........................................................................................................	92
[OPTIONS(2)].........................................................................................................	94
Setting up the Projector for a Wired LAN Connection [WIRED LAN].....................	96
Setting up the Projector for a Wireless LAN Connection (with the optional USB
Wireless LAN Unit equipped) [WIRLESS LAN]......................................................	97

vii

	Table of Contents
7 Menu Descriptions & Functions [INFO.].......................................................................	99
[USAGE TIME]........................................................................................................	99
[SOURCE]............................................................................................................	100
[WIRED LAN]........................................................................................................	100
[WIRELESS LAN].................................................................................................	100
[VERSION]...........................................................................................................	101
[OTHERS].............................................................................................................	101
8 Menu Descriptions & Functions [RESET]..................................................................	102
Returning to Factory Default [RESET]..................................................................	102
6. Installation and Connections..................................................................	103
Setting Up the Screen and the Projector....................................................................	103
Making Connections...................................................................................................	106
Connecting Your Computer...................................................................................	106
Connecting an External Monitor...........................................................................	108
Connecting Your DVD Player or Other AV Equipment..........................................	109
Connecting Component Input...............................................................................	110
Connecting HDMI Input........................................................................................	111
Connecting to a Wired LAN..................................................................................	112
Connecting to a Wireless LAN (Optional: NP02LM series)..................................	113
7. Maintenance.....................................................................................................	116
Cleaning the Filters....................................................................................................	116
2 Cleaning the Projection Window................................................................................	119
3 Cleaning the Cabinet..................................................................................................	119
4 Replacing the Lamp and the Filters...........................................................................	120
8. Appendix.............................................................................................................	126
Troubleshooting..........................................................................................................	126
Indicator Messages..............................................................................................	126
Common Problems & Solutions............................................................................	127
If there is no picture, or the picture is not displayed correctly...............................	128
Specifications.............................................................................................................	129
Cabinet Dimensions...................................................................................................	131
4 Pin Assignments of D-Sub COMPUTER Input Connector.........................................	132
5 Compatible Input Signal List......................................................................................	133
6 PC Control Codes and Cable Connection..................................................................	134
7 Troubleshooting Check List........................................................................................	135
8 TCO Certification........................................................................................................	137
9 REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and
Mexico).................................................................................................................	138

viii

1. Introduction

1 What’s in the Box?

Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector.

Projector

Cable cover (24F48981)

(attached to the projector at the time of shipment → page 5)

Power cord	Computer cable (VGA)	Remote control	Batteries (AAA × 2)
(US: 7N080240)	(7N520073/7N520052)	(7N900924)
(EU: 7N080027)

•Important Infomation (For North

America: 7N8N3231) (For Other countries than North America: 7N8N3231 and 7N8N3241)

•Quick Setup Guide (7N8N3251)/

(7N8N3261)

NEC Projector CD-ROM

User’s manual (PDF) and the utility software

(7N951861)

For North America only

Limited warranty

For customers in Europe:

You will find our current valid Guarantee Policy on our Web Site: www.nec-display-solutions.com

Unless otherwise described in the user’s manual, the drawings for the projector cabinet show examples of the

UM330X.

1

1. Introduction

Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.

Features you’ll enjoy:

•Ultra short throw distances

Ultra short focal lenses provide for a larger image using a shorter throw distance when compared to a typical projector lens.

UM330X/UM280X: Max 116.6" (UM330W/UM280W: Max 110"), throw distance: 51 cm/20 inches (The throw distance refers to the distance between the screen and the screen side of the projector)

•Quick start (3 seconds*1), Quick Power Off, Direct Power Off

3 seconds*1 after turning on the power, the projector is ready to display PC or video images.

The projector can be put away immediately after the projector is powered down. No cool down period is required after the projector is turned off from the remote control or cabinet control panel.

The projector has a feature called “Direct Power Off”.This feature allows the projector to be turned off (even when projecting an image) by using the Main Power Switch or disconnecting the AC power supply.

To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker.

*1 The quick start time is only when [STANDBY MODE] is set to [NORMAL] in the on-screen message.

•0.2 W (100-130 V AC)/0.4 W (200-240 V AC) in standby condition with energy saving technology

Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes only 0.2 W (100-130 V AC)/0.4 W (200-240 V AC).

•Carbon Meter

This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO MODE] is set to [AUTO ECO], [NORMAL], or [ECO].

The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off and in the INFO of the on-screen menu.

•Lamp life up to 8000 hours*2

Using in Eco Mode (ECO) allows you to prolong the projector’s lamp life up to 8000 hours (up to 4000 hours in ECO MODE OFF).

*2 UM330X/UM330W: 6000 hours (up to 3000 hours in ECO MODE OFF)

•Two HDMI inputs supports digital signals

The two HDMI inputs provide HDCP compatible digital signals.The HDMI input also supports audio signal.

•16 W built-in speaker for an integrated audio solution

Powerful 16 watt monaural speaker provides volume need for large rooms.

•MIC Input provided

A MIC input jack for a commercially available dynamic microphone is useful for your presentation in a conference room or lecture in a classroom.

•The optional interactive white board kit and the projector can be used to convert your whiteboard into a virtual touchscreen.

An interactive white board kit (NP02Wi) is available as an option.

•The supplied remote control allows you to assign a CONTROL ID to the projector

Multiple projectors can be operated separately and independently with the same single remote control by assigning an ID number to each projector.

2

1. Introduction

•USB Display

Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with the projector allows you to send your computer screen image to the projector without the need of a traditional computer cable (VGA).

•Integrated RJ-45 connector for wired networking capability along with wireless networking capabilities

An RJ-45 connector is standard. An optional USB Wireless LAN Unit is required for wireless LAN connection.

•Software programs (User Supportware) contained in the supplied CD-ROM

The supplied NEC Projector includes four programs:Virtual Remote Tool, Image Express Utility Lite (for Windows/ Mac OS), PC Control Utility Pro 4 (for Windows)/5 (for Mac OS), and Viewer PPT Converter 3.0.

Image Express Utility Lite (for Windows) can be started from a commercially available USB memory or SD card without the need of installing on your computer.

•AUTO POWER ON and AUTO POWER OFF features

The DIRECT POWER ON, AUTO POWER ON(COMP.), AUTO POWER OFF, and OFF TIMER features eliminate the need to always use the POWER button on the remote control or projector cabinet.

•Preventing unauthorized use of the projector

Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security chain opening to help prevent unauthorized access, adjustments and theft deterrence.

•High resolution up to WUXGA*3

High resolution display - up to WUXGA compatible, XGA (UM330X/UM280X)/WXGA (UM330W/UM280W) native resolution.

*3 When WXGA MODE is set to ON.

•CRESTRON ROOMVIEW compatibility

The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and controlled from a computer or controller.

About this user’s manual

The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual.This may save you time later on. At the beginning of each section of the manual you’ll find an overview. If the section doesn’t apply, you can skip it.

3

1. Introduction

Part Names of the Projector

Top and Screen Side of Projector

Projection Window

Monaural Speaker (16 W)

Focus Ring

(→ page 20)

Filter Cover/Intake Vent/Filter

(→ page 116, 123)

Spacer (Left/Right) To fine-adjust the height of the rear foot, remove the spacer and rotate the rear foot to the desired height.

(→ page 21)

Intake Vent/Filter

(→ page 116, 123)

Security chain opening

Attach an anti-theft device.

The security chain opening accepts security wires or chains up to 0.18 inch/4.6 mm in diameter.

Built-in Security Slot ( )*

Tilt Foot

(→ page 21)

* This security slot supports the MicroSaver® Security System.

Terminal Panel Side of Projector

Lamp Cover (→ page 121)

Exhaust Vent

AC Input

Connect the supplied power cord’s three-pin plug here, and plug the other end into an active wall outlet. (→ page 15)

Controls (→ page 7)

Remote Sensor (→ page 10)

Terminal Panel (→ page 8)

Screw Hole for Cable Cover (Left/

Right)

(→ page 5)

4

1. Introduction

Removing and Attaching the Cable Cover

After finishing connections, attach the supplied cable cover to properly hide the cables.

CAUTION:

•Be sure to tighten the screws after attaching the cable cover. Failure to do so may cause the cable cover to come off and fall, resulting in injury or damage to the cable cover.

•Do not put bundled cables in the cable cover. Doing so may damage the power cord, resulting in a fire.

•Do not hold the cable cover while moving the projector or do not apply excessive force to the cable cover. Doing so may damage the cable cover, resulting in injury.

Removing the cable cover

Tool needed:

• Phillips screwdriver (plus-head) about 9 cm/4 inches in length

9 cm/4 inches

1.Loosen the cable cover screws until the Phillips screwdriver goes into a freewheeling condition

2. Remove the cable cover.

Push up the cable cover slightly and rotate it to release.

Pull the cable cover while pushing and holding the arrow part

If you find it to hard to release the cable cover, try holding it slightly up.

2

1

5

1. Introduction

Attaching the cable cover

1.Align four tabs of the cable cover with grooves of the projector and push the cable cover until you click it.

NOTE:

• Be careful not to get cables caught in between the cable cover and the projector.

2.Tighten the cable cover screws.

• Be sure to tighten the screws.

6

1. Introduction

Top Features

5

7

9

10

6

3

1, 2

4

8

11

1. (POWER) Button (→ page 16, 26)

2.POWER Indicator (→ page 15, 16, 26, 126)

3.STATUS Indicator (→ page 126)

4.LAMP Indicator (→ page 120, 126)

5.ECO Button (→ page 29)

6.SOURCE Button (→ page 18)

7.AUTO ADJ. Button (→ page 25)

8.MENU Button (→ page 73)

9./ Volume Buttons / Keystone Buttons

(→ page 23, 25)

10.ENTER Button (→ page 73)

11.EXIT Button (→ page 73)

7

1. Introduction

Terminal Panel Features

13 12				5		11					3		4

1

2

14 7

6 8 9 10 15

1.COMPUTER IN/ Component Input Connector (Mini D-Sub 15 Pin) (→ page 106, 110)

2.COMPUTER AUDIO IN Mini Jack (Stereo Mini)

(→ page 106, 110)

3.HDMI 1 IN Connector (Type A)

(→ page 106, 111)

4.HDMI 2 IN Connector (Type A)

(→ page 106, 111)

5.USB (PC) Port (Type B)

(→ page 40, 41, 106)

6.MONITOR OUT (COMPUTER) Connector (Mini D- Sub 15 Pin) (→ page 108)

7.AUDIO OUT Mini Jack (Stereo Mini) (→ page

108)

8.S-VIDEO IN Connector (Mini DIN 4 Pin)

(→ page 109)

9.VIDEO IN Connector (RCA) (→ page 109)

10.VIDEO/S-VIDEO AUDIO IN L/MONO, R (RCA)

(→ page 109)

11.LAN Port (RJ-45) (→ page 112)

12.USB Port (Type A) (→ page 64)

13.USB (WLAN) Port

(For optional USB Wireless LAN Unit) (→ page 113)

14.PC CONTROL [PC CONTROL] Port (D-Sub 9 Pin)

(→ page 134)

Use this port to connect a PC or control system. This enables you to control the projector using serial communication protocol. If you are writing your own program, typical PC control codes are on page 134.

15.MIC Input Jack (Monaural Mini)

(→ page 61)

8

1. Introduction

Part Names of the Remote Control

	1	3
	2	7
		5
	4	6	11. VIEWER Button (→ page 18, 62)
	8	10	12. NETWORK Button (→ page 18)
		15
	9		13. USB DISPLAY Button (→ page 18)
	11	13	14. ID SET Button
	14	12	(→ page 91)
	17	16	15. Numeric Keypad Button/CLEAR Button
	18	19	(→ page 91)

	21	20	16. FREEZE Button
		25	(→ page 28)
	22		17. AV-MUTE Button
		27	(→ page 28)
	23	24	18. MENU Button
		28	(→ page 73)
	26
		29	19. EXIT Button (→ page 73)
			20. Button (→ page 73)
	32	30
			21. ENTER Button (→ page 73)
		31	22. D-ZOOM (+)(–) Button
			(→ page 28)

23. MOUSE L-CLICK Button*

(→ page 40)

			24. MOUSE R-CLICK Button*
			(→ page 40)
			25. PAGE / Button
	1.	Infrared Transmitter	(→ page 40)
		(→ page 10)	26. ECO Button (→ page 29)
	2.	POWER ON Button	27. KEYSTONE Button
		(→ page 16)
			(→ page 24)
	3.	POWER OFF Button	28. PICTURE Button
		(→ page 26)
			(→ page 79, 81)
	4, 5, 6. COMPUTER 1/2/3 Button		29. VOL. (+)(–) Button
		(→ page 18)
			(→ page 25)
		(COMPUTER 2/3 button is not available.)	30. ASPECT Button
	7.	AUTO ADJ. Button
			(→ page 84)
		(→ page 25)	31. FOCUS/ZOOM Button
	8.	VIDEO Button
			The ZOOM button will display the DIGITAL ZOOM bar.
		(→ page 18)
			(→ page 22, 86) The FOCUS button does not work
	9.	S-VIDEO Button	on this series of projectors.
		(→ page 18)	32. HELP Button
	10. HDMI Button (→ page 18)		(→ page 99)

*The MOUSE L-CLICK and MOUSE R-CLICK buttons work only when a USB cable is connected with your computer.

9

1. Introduction

Battery Installation

1 Press firmly and slide the battery cover off.

Remote Control Precautions

2 Install new batteries (AAA).Ensure that you have the batteries’polarity (+/−) aligned correctly.

3Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries.

•Handle the remote control carefully.

•If the remote control gets wet, wipe it dry immediately.

•Avoid excessive heat and humidity.

•Do not short, heat, or take apart batteries.

•Do not throw batteries into fire.

•If you will not be using the remote control for a long time, remove the batteries.

•Ensure that you have the batteries’ polarity (+/−) aligned correctly.

•Do not use new and old batteries together, or use different types of batteries together.

•Dispose of used batteries according to your local regulations.

Operating Range for Wireless Remote Control

Remote sensor on projector cabinet

	feet/7	m
22

Remote sensor on projector cabinet

30°	Remote control

30°

19.7 feet/6 m

Remote control

30° 30°

60°

•The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of the remote sensor on the projector cabinet.

•The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor.Weak batteries will also prevent the remote control from properly operating the projector.

10

1. Introduction

Operating Environment for Software Included on CD-ROM

Names and Features of Bundled Software Programs

Name of software program	Features
Virtual Remote Tool	This is a software program used to control the power ON/OFF and source selec-
(Windows only)	tion of the projector from your computer by using the supplied computer cable
	(VGA) and others. (→ page 34)
Name of software program	Features
Image Express Utility Lite	•	This is a software program used to project your computer’s screen over the
Image Express Utility Lite for		USB cable or the wired/wireless network. The computer cable (VGA) is not
Mac OS		required. (→ page 41, page 54)
	•	This software program can be used to control the power ON/OFF and source
		selection of the projector from your computer.
	• The Geometric CorrectionTool (GCT) function allows you to correct distortion
		of images projected on a curved wall. (→ page 59)
	*	“USB Display” and “GCT” functions are not supported by Mac.
Name of software program	Features
PC Control Utility Pro 4	This is a software program used to operate the projector from the computer when
PC Control Utility Pro 5 (for Mac	the computer and the projector are connected with LAN (wired or wireless) or
OS)	a serial cable. (→ page 50)
Name of software program	Features
Viewer PPT Converter 3.0	This is a software program used to convert files created with PowerPoint into
(Windows only)	JPEG files that can be displayed with the viewer function of the projector when
	a USB memory device is inserted into the projector. (→ page 70)

NOTE:

• Image Express Utility Lite does not support “Meeting Mode” in Image Express Utility 2.0 included with our other models.

Download service

For the update information about these software programs, visit our website:

URL: http://www.nec-display.com/dl/en/index.html

11

1. Introduction

Operating Environment

The following is the operating environment for Image Express Utility Lite. For the operating environment of other software program, refer to the help function of each software program.

[Windows]

Supported OS	Windows 7 Home Basic
	Windows 7 Home Premium
	Windows 7 Professional
	Windows 7 Ultimate
	Windows 7 Enterprise
	Windows Vista Home Basic
	Windows Vista Home Premium
	Windows Vista Business
	Windows Vista Ultimate
	Windows Vista Enterprise
	Windows XP Home Edition (32-bit version) Service Pack 3 or later
	Windows XP Professional (32-bit version) Service Pack 3 or later
	•	Windows power-saving function is not supported.
Processor	•	Windows 7/Windows Vista
		Pentium M 1.2 GHz equivalent or higher required
		Dual core 1.5 GHz or higher recommended
	• Windows XP
		Pentium M 1.0 GHz equivalent or higher required
		Dual core 1.0 GHz or higher recommended
Memory	•	Windows 7/Windows Vista
		512 MB or more required
		1 GB or more recommended
	• Windows XP
		256 MB or more required
		512 MB or more recommended
		* More memory may be required to run additional applications simultane-
		ously.
Graphic processor	•	Windows 7/Windows Vista
		The “Graphics” score 3.0 or more of “Windows Experience Index” recom-
		mended.
Network environment	TCP/IP-compatible wired LAN or wireless LAN
	(* Use a wireless LAN unit complying with the Wi-Fi standard.)
Resolution	•	Windows 7/Windows Vista
		SVGA (800 × 600) or higher required
		XGA (1024 × 768) recommended
	• Windows XP
		VGA (640 × 480) or higher required
		XGA (1024 × 768) recommended
	1024 dots × 768 lines - 1280 dots × 800 lines recommended (UM330W/
	UM280W)
Screen Colors	High Color (15 bits, 16 bits)
	True Color (24 bits, 32 bits) (recommended)
	•	256 or fewer colors are not supported.

12

1. Introduction

[Mac]

Supported OS	Mac OS X v10.6, v10.7
Processor (CPU)	Intel® Core™ Duo processor 1.5 GHz or higher required
	Intel® Core™ 2 Duo processor 1.6 GHz or higher recommended
	* PowerPC® is not supported
Memory	512 MB or higher required
Network environment	Wired or wireless LAN required that supports TCP/IP
	Only wireless LAN units built into Mac are guaranteed to work with Image
	Express Utility Lite.
	“Easy Connection” supports only wireless LAN.
Supported Resolution	VGA (640 × 480) or higher required
	XGA (1024 × 768) recommended
	(1024 × 768 – 1280 × 800 recommended for UM330W/UM280W)
Supported Screen Colors	16.70 million colors required

13

2. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

Flow of Projecting an Image

Step 1

• Connecting your computer / Connecting the power cord (→ page 15)

Step 2

• Turning on the projector (→ page 16)

Step 3

• Selecting a source (→ page 18)

Step 4

•Adjusting the picture size and position (→ page 19)

•Correcting keystone distortion [KEYSTONE] (→ page 23)

Step 5

•Adjusting a picture and sound

-Optimizing a computer signal automatically (→ page 25)

-Turning up or down volume (→ page 25)

Step 6

• Making a presentation

Step 7

• Turning off the projector (→ page 26)

Step 8

• When Moving the Projector (→ page 27)

14

2. Projecting an Image (Basic Operation)

Connecting Your Computer/Connecting the Power Cord

1.Connect your computer to the projector.

This section will show you a basic connection to a computer. For information about other connections, see “6.

Installation and Connections” on page 106.

Connect the computer cable (VGA) between the projector’s COMPUTER IN connector and the computer’s port

(mini D-Sub 15 Pin). Turn two thumb screws of both connectors to fix the computer cable (VGA).

2.Connect the supplied power cord to the projector.

First connect the supplied power cord’s three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet.

The projector’s power indicator will flash for a few seconds and then will light orange* (standby mode). The STATUS indicator will also light green*.

* This will apply for both indicators when [NORMAL] is selected for [STANDBY MODE]. See the Power Indicator section.(→ page 126)

Make sure that the prongs are fully inserted into both the AC IN and the wall outlet.

To wall outlet ←

CAUTION:

Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation.

Use caution when picking up the projector.

15

2. Projecting an Image (Basic Operation)

Turning on the Projector

•Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.

The POWER indicator will turn to blue and the projector will become ready to use.

TIP:

•When the message “Projector is locked! Enter your password.” is displayed, it means that the [SECURITY] feature is turned on.

(→ page 31)

After you turn on your projector, ensure that the computer or video source is turned on.

NOTE: When no input signal is present, the no-signal guidance is displayed (factory menu setting).

Standby

Blinking

Power On

Steady orange light

Blinking blue light

Steady blue light

(→ page 126)

16

2. Projecting an Image (Basic Operation)

Note on Startup screen (Menu Language Select screen)

When you first turn on the projector, you will get the Startup menu.This menu gives you the opportunity to select one of the 29 menu languages.

To select a menu language, follow these steps:

1.Use the , H, F or E button to select one of the 29 languages from the menu.

2. Press the ENTER button to execute the selection.

After this has been done, you can proceed to the menu operation.

If you want, you can select the menu language later. (→ [LANGUAGE] on page 75 and 88)

NOTE:

•When turning off the power supply and then back on by using a power strip or breaker.

Allow a minimum of 1 second between turning off the main power supply and turning it back on again. Failing to do so could result in no power to the projector. (There will be no stand-by LED)

Should this happen, unplug the power cord and plug it in again. Turn on the main power.

•If one of the following things happens, the projector will not turn on.

-If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the projector will not turn on to protect the internal system. If this happens, wait for the projector’s internal components to cool down.

-When the lamp reaches its end of usable life, the projector will not turn on. If this happens, replace the lamp.

-If the STATUS indicator lights orange with the power button pressed, it means that the [CONTROL PANEL LOCK] is turned on. Cancel the lock by turning it off. (→ page 90)

-If the lamp fails to light, and if the STATUS indicator flashes on and off in a cycle of six times, wait a full minute and then turn on the power.

•While the POWER indicator is blinking blue in short cycles, the power cannot be turned off by using the power button.

•Immediately after turning on the projector, screen flicker may occur. This is normal. Wait 3 to 5 minutes until the lamp lighting is stabilized.

•When the projector is turned on, it may take some time before the lamp light becomes bright.

•If you turn on the projector immediately after the lamp is turned off or when the temperature is high, the fans run without displaying an image for some time and then the projector will display the image.

17

2. Projecting an Image (Basic Operation)

Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the projector.

Detecting the Signal Automatically

Press the SOURCE button once.The projector will search for the available input source and display it.The input source will change as follows:

COMPUTER → HDMI1 → HDMI2 →VIDEO → S-VIDEO →VIEWER →

USB DISPLAY → COMPUTER → ...

•With the SOURCE screen displayed, you can press the SOURCE button a few times to select the input source.

TIP: If no input signal is present, the input will be skipped.

Using the Remote Control

Press any one of the COMPUTER 1, HDMI,VIDEO, S-VIDEO,VIEWER,

NETWORK, or USB DISPLAY buttons.

NOTE: The HDMI button on the remote control will toggle between “HDMI1” and “HDMI2”. Upon the first button push the projector will always switch to HDMI 1 IN. A second button push will then switch to HDMI 2 IN. if there is only one HDMI source connected to the projector it is recommended to place that signal on the HDMI 1 IN connector.

Selecting Default Source

You can set a source as the default source so that it will be displayed each time the projector is turned on.

1.Press the MENU button.

The menu will be displayed.

2.Press the button twice to select [SETUP] and press the H button or the ENTER button to select [GENERAL].

3.Press the button four times to select [OPTIONS(2)].

4.Press the H button five times to select [DEFAULT SOURCE SE-

LECT] and press the ENTER button.

The [DEFAULT SOURCE SELECT] screen will be displayed. (→ page 95)

5.Select a source as the default source, and press the ENTER button.

6.Press the EXIT button a few times to close the menu.

7.Restart the projector.

The source you selected in step 5 will be projected.

NOTE: Even when [AUTO] is turned on, the [NETWORK] will not be automatically selected. To set your network as the default source, select [NETWORK].

TIP:

•When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER IN input will power on the projector and simultaneously project the computer’s image.

([AUTO POWER ON(COMP.)] → page 95)

•On Windows 7, a combination of the Windows and P keys allows you to set up external display easily and quickly.

18

2. Projecting an Image (Basic Operation)

Adjusting the Picture Size and Position

Use the adjustable tilt foot, the zoom function or the focus ring to adjust the picture size and position.

In this chapter drawings and cables are omitted for clarity.

Adjusting horizontal/vertical position	Adjusting the focus [Focus ring]
(→ page 20)	(→ page 20)

Finely adjusting the left and right tilt [Tilt Foot] (→ page 21)

Finely adjusting the vertical tilt [Tilt Foot] (→ page 21)

Adjusting the size [Digital Zoom] (→ page 22)

Correcting the keystone distortion [Keystone]* (→ page 23)

* To perform keystone correction manually, see “6. Correcting Keystone Distortion Manually” on page 23.

19

2. Projecting an Image (Basic Operation)

Adjusting horizontal/vertical position

The throw distance can affect the size and the height of the projected image. Before installing the projector, decide the throw distance according to “Setting Up the Screen and the Projector” (→ page 103, 104)

It is recommended to display the test pattern while adjusting the image. (→ page 92)

1.Move the projector back and forth and left and right so that the image fits the screen width.

You can reduce the image size to 70% by using [DIGITAL ZOOM] from the menu.

2.Place the projector so that it is parallel with the screen.

If the top side of the image is not parallel with its bottom side, rotate the projector slightly to adjust it. If the side of the image shows outside the screen, move it to the center line of the screen.

Adjusting the focus (Focus ring)

• Rotate the focus ring until you obtain the best focus.

Focus ring

(view from the bottom)

20