NEC PlasmaSync 42XM2/S Installation Guide
|
NEC Solutions (America), Inc. |
|
Visual Systems |
42XM2/S (Residential Model) Installation Guide |
|
42” Plasma Displays |
v1.1 |
Contents |
|
Product Description and Notes |
Page 1 |
Ventilation Requirements |
Page 2 |
Display Dimensions |
Page 3 |
Front, Top & Bottom |
|
Rear & Sides |
Page 4 |
Display Dimensions w/Optional Speakers and Stand |
Page 5 |
Dimensions w/Optional Flat Wall Mount |
Page 6 |
Dimensions w/Optional Tilt Wall Mount |
Page 7 |
Dimensions w/Optional Ceiling Mount |
Page 8 |
Connections |
Page 9 |
Control Codes |
Page 10 |
Product Description
Type: |
Plasma Display |
Screen Surface: |
Anti-Reflective |
Resolution: |
1024x768 (XGA) |
Color Correction: NEC CCF (Capsulated Color Filter, in panel) |
|
Aspect Ratio: |
16:9 |
|
and AccuCrimson (in front filter) |
FCC: |
Class B |
Dimensions: |
40”(W) x 24”(H) x 3.5”(D) |
DVI Input: |
HDCP capable |
Weight: |
65.0 lbs |
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below is the maximum angle that the display can be tilted
Landscape 30° |
Max Tilt |
|
www.necvisualsystems.com |
42XM2/S Page 1 of 10 |
Ventilation Requirements (all models)
Dimensions below are minimum required for proper ventilation.
WALL
2" |
2" |
WALL |
2" |
WALL |
2" |
2"
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
www.necvisualsystems.com |
42XM2/S Page 2 of 10 |
Display dimensions
|
|
|
Ventilation Openings |
|
|
|
|
0.63 |
1.69 |
0.38 |
34.69 |
0.38 |
1.69 |
0.63 |
|
|
|
|
|
|
|
1.14 |
0.98 |
|
|
|
|
|
|
1.38 |
|
|
|
|
40.08 |
1.42 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.30 |
|
24.02
0.98 |
Ventilation Openings |
|
|
2.52 |
|
|
0.79 |
3.113.95
0.63 1.69 0.38
36.76 |
0.59 |
2.72 |
0.35 |
|
Ventilation Openings |
Ventilation Openings |
|||
|
||||
|
2.70 |
0.981.38 |
2.17 |
33.03 |
0.81 |
1.14 |
1.34 |
33.25 |
3.50 |
0.63 |
23.27 |
16.81 |
|
34.55 |
5.53 |
|
www.necvisualsystems.com |
42XM2/S Page 3 of 10 |
Loading...