NEC MH150, MH160 User Manual

NEC MH150/MH160 Mobile
Handset Administration Tool
Installation
User Guide
NEC
NEC Unified Solutions, Inc.
September 2008
NDA-30922, Issue 1
NEC Unified Solutions, Inc. reserves the right to change the
specifications, functions, or features, at any time, without notice.
NEC Unified Solutions, Inc. has prepared this document for the exclusive use of its employees and customers. The information
contained herein is the property of NEC Unified Solutions, Inc. and
shall not be reproduced without prior written approval from
NEC Unified Solutions, Inc.
© 2008 NEC Unified Solutions, Inc.
MS-DOS® and Microsoft® Windows® are
registered trademarks of Microsoft Corporation.
All other brand or product names are or may be trademarks or
registered trademarks of, and are used to identify products or services
of, their respective owners.

Contents

i
About This Guide 1-1
Icons and conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Handset Administration Tool Installation 2-1
Installing the Handset Administration Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Installing the USB Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Using the Admin Tabs 3-1
Connecting the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Password Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Character table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Error Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Software Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
FTP Update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Local File Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Using the Settings Editor 4-1
Opening the Settings Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
The Settings Editor Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
ii Contents
The Settings Editor Toolbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
File management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Copy settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Upload/download and indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Tab Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Creating a Configuration Plan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Organize the plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Create the options and save the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Configuration planning worksheet (sample) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Downloading and Uploading Configuration Plans. . . . . . . . . . . . . . . . . . . . . . . 4-9
Downloading a configuration plan to a handset . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Uploading a configuration plan from a handset . . . . . . . . . . . . . . . . . . . . . . . 4-10
Regulatory Domain Mismatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1

Figures

Figure Title Page
iii
2-1 Mobile Handset and PC connection using USB ports . . . . . . . . . . . . . . . 2-1
2-2 Preparing to Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
2-3 InstallShield Wizard welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
2-4 InstallShield Wizard: Destination folder. . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
2-5 InstallShield Wizard completed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
2-6 Found New Hardware Wizard: Welcome. . . . . . . . . . . . . . . . . . . . . . . . . 2-6
2-7 Found New Hardware Wizard: Install software for USB Device . . . . . . . 2-7
2-8 Found New Hardware Wizard: Choose search and installation options . 2-8
2-9 Warning: Software has not passed Microsoft testing. . . . . . . . . . . . . . . . 2-9
2-10 New software is being installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
2-11 Software installation completed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
3-1 End-User License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3-2 Connect tab prompt:showing the next action or status.. . . . . . . . . . . . . . 3-2
3-3 Prompt to enter the password and remember password checkbox . . . . . 3-3
3-4 Connect tab prompt indicates the Mobile Handset is connected. . . . . . . 3-4
3-5 Password change tab window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
3-6 Error information tab screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
3-7 Firmware tab displays current file information. . . . . . . . . . . . . . . . . . . . . 3-7
3-8 Firmware update ready to begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
3-9 Version tab displays current Handset information. . . . . . . . . . . . . . . . . . 3-9
3-10 Version tab displays the FTP update progre s s . . . . . . . . . . . . . . . . . . . 3-10
3-11 Mobile Handset update prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
3-12 Confirmation of new application installation. . . . . . . . . . . . . . . . . . . . . . 3-11
3-13 Local file update initiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
3-14 Handset Administration Tool upgrade confirmation dialog box . . . . . . . 3-12
3-15 Confirmation of HandsetAdmin shutdown . . . . . . . . . . . . . . . . . . . . . . . 3-12
4-1 Settings Editor on the Settings tab window . . . . . . . . . . . . . . . . . . . . . . . 4-2
4-2 Handset Settings Editor Network Config screen . . . . . . . . . . . . . . . . . . . 4-3
4-3 Settings Editor toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
4-4 Handset Settings Editor example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
iv Figures
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1

Tables

v
Table Title Page
3-1 Handset character entry table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
4-1 Tab options on the Settings Editor window . . . . . . . . . . . . . . . . . . . . . . . 4-5
4-2 Configuration planning worksheet sample. . . . . . . . . . . . . . . . . . . . . . . . 4-8
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
vi Tables
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
1
About This Guide
The Handset Administration Tool is a software utility developed by NEC Unified Solutions, Inc. to autom at e t he c o nf i gu ration of m ultiple NEC MH150 and MH160 Mobile Handsets and perform various administr ation tasks. This document explains how to use the Handset Administration Tool to administer and configure the NEC MH150 and MH160 Mobile Handset.
Please refer to the configuration and administration document that
ns to the system in your facility for exact configuration options of
pertai the handset. Specific configuration options are explained in detail in t he configuration and administration document for your system.
• NEC MH150/MH160 Mobile Handset Administration Guide
• NEC MH150/MH160 Deployment Best Practices Guide
REFERENCE
• NEC WLAN Voice Gateway Administration Guide
1-1
Customer support
hotline
For additional information or support on this NEC Unified Solutions, Inc. product, contact your NEC representative.

Icons and conventions

This manual uses the following icons and conventions.
Caution! Follow these instructions carefully to avoid danger.
CAUTION
Note these instructions carefully.
NOTE
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
1-2 About This Guide
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
2
Handset Administration Tool Installation
The Handset Administration Tool is a software utility installed on a PC with a USB port. It is designed as a time-saving device for rapid administration and configuration of a number of handsets. During operation, the USB cable must be connected from the PC's USB port to the Dual Charger's USB port, as shown in Figure 2-1.
2-1
Figure 2-1
Mobile Handset and PC connection using USB ports
Administrative
computer
Handset in
Dual Charger
USB
cable
Configuration options include:
• Setting all options on the Admin
• Setting all options on the
• Recording error information to assist troubleshooting,
• Upgrading handset software. The Setup
Handset Administration Tool and download the files for the USB driver. The USB driver must be installed as a separate process after the Handset Administration Tool is installed.
.exe file on the CD will download and install the files for the
Config menu,
menu,
The CD contains Setup.exe files for SRP and SIP. Please ensure that you have downloaded the Setup.exe program for your protocol.
NOTE
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
2-2 Handset Administration Tool Installation
Necessary components:
• PC with a USB port running Windows Vista,
• Dual Charger for the NEC MH150 and MH160 Mobile Handset,
• Power supply for the appropriate country or region,
• A USB cable with a 5-pin mini-

Installing the Handset Administration Tool

Step 1 Locate the Setup.exe file on the CD. You may copy this file to your local
drive or install from the CD. Click the Setup.exe file to start the installation process.
2000, Windows XP, or Windows
USB connector (not supplied by NEC).
Figure 2-2
Preparing to Install
The InstallShield Wizard will continue with the install.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Step 2 Click Next to continue
Handset Administration Tool Installation 2-3
Figure 2-3
InstallShield Wizard welcome
.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
2-4 Handset Administration Tool Installation
Step 3 The Destination Folder allows you to change the install to another
folder or to simply install in the folder location displayed next to the folder icon. Click Next to continue
Figure 2-4
InstallShield Wizard: Destination folder
.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Handset Administration Tool Installation 2-5
Step 4 The program is about to be installed. Click Install to begin.
Figure 2-5
InstallShield Wizard read to begin installation
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
2-6 Handset Administration Tool Installation
Step 5 Click Finish to exit the InstallShield Wizard.
Figure 2-6
InstallShield Wizard completed
NOTE
The Handset Administration Tool will appear in your Programs list under the Start menu as HandsetAdmin and as an icon on your desktop. It may be launched like any other program.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1

Installing the USB Driver

The USB driver installati on a l lows the Dual Charger to be the communication link between the handset and the PC. The two files needed for the USB driver to function are named slnkusb.sys and slnkusb.inf. If the Destination Folder had not been changed in step-3, these files will be located at C:\Program Files\HandsetAdmin\Driver\
Step 1 Find the USB driver files on the PC. Step 2 Place the Dual Charger on a flat, horizontal surface. Plug the power
Step 3 Plug the USB cable into the Dual Charger and into an available USB port
Step 4 Power off a NEC MH150 and MH160 Mobile Handset, remove the
If the handset is not properly seated in the Dual Charger, the USB connection will not be made and the Battery Pack will begin charging, and the handset screen displays
NOTE
a Charging… indication. If this occurs, reseat the handset, check the connections on the USB cable, and/or remove the Battery Pack and try again.
Handset Administration Tool Installation 2-7
supply into the Dual Charger and into an appropriate wall outlet.
on the PC.
Battery Pack (optional), and place the handset in the Charger. If properly seated, the handset automatically powers up in USB mode and the handset screen displays a USB Mode on indication.
Figure 2-7
Step 5
Microsoft Windows will start the Found New Hardware Wizard. Ther e is no need to connect to Windows Update, so select No, not this time and click Next.
Found New Hardware Wizard: Welcome
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
2-8 Handset Administration Tool Installation
Step 6 The files need to be installed from a specific location, so select Install
from a list or specific location (Advanced) and click Next.
Figure 2-8
Found New Hardware Wizard: Install software for USB Device
.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Handset Administration Tool Installation 2-9
Step 7 Select Search for the best driver in these locations.
Figure 2-9
— Clear the check box Search remo — Select the check box Include this location in the sea
vable media.
rch.
— Browse the folder where the USB driver files were installed. The
d
efault location is C:\Program Files\HandsetAdmin\Driver\
—Click Ne
Found New Hardware Wizard: Choose search and installation options
.
xt
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
2-10 Handset Administration Tool Installation
Step 8 The following warning message from the Microsoft Wizard displays. The
USB driver files are proprietary to S pectr aLink and were not submitted to Microsoft for testing. They were fully tested by SpectraLink to more exacting standards and will not harm your system. Click Continue
Anyway
Figure 2-10
Figure 2-11
Warning: Software has not passed Microsoft testing
.
Step 9 Microsoft Wizard installs the USB driver software
New software is being installed
.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
2-11 Handset Administration Tool Installation
Step 10 The final screen indicates that the USB driver has been successfully
installed. Click Finish to close the wizard and proceed with handset configuration
Figure 2-12
Software installation completed
.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
2-12 Handset Administration Tool Installation
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
3
Using the Admin Tabs
Launch the Handset Admin program from the Start menu. You will need to accept the license agreement (Figure 3-1) the first time the program is launched and whenever an update is installed.
3-1
Figure 3-1
End-User License Agreement
The Handset Administration Tool has two separate functional areas: the Admin Tabs and the Handset Settings Editor.
The Admin Tabs are used to connect to the handset, set and change the passw update the Handset Administration Tool software.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
ord, retrieve error messages, update handset software, and
3-2 Using the Admin Tabs
The Handset Settings Editor is used to configure handsets, as well as create, save and copy Admin menu options. See “Opening the Settings
Editor” on page 4-1 for detailed instructions on
Settings Editor.
Indicators The Handset Administration Tool uses indicators to alert you to the
status of the action being performed.
Green -
Yellow -
Red - ind
Gray
Blinking -
If closed, the Admin Tabs may be opened from the Settings Editor by selecting the Admin or View option on the Settings Editor menu bar.
NOTE

Connecting the Handset

using the Handset
indicates ready status.
indicates caution or attention. icates an error
- indicates not active status. indicates entry is needed or waiting on system response.
Figure 3-2
There are six tab labels that describe each of the available functions. The tab labels are: Connect, Password, Error info, Firmware, Settings, and Version. See Figure 3-2.
The Co
nnect tab has a prompt line which will state one of three messages: Power handset off, then put it in the Dual Charger; Enter handset's password; or Connected.
Connect tab prompt:showing the next action or status.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Using the Admin Tabs 3-3
The prompt line at the bottom of the window provides information about what action should be taken or the status of the utility. Se e Figure 3-3.
Insert the handset into the Dual Charger and enter the pass
word.
Figure 3-3
Prompt to enter the password and remember password checkbox.
When the handset is inserted for the first time, the password must be entered. If you select the Remember password check box, the password is retained as the default password for all handsets. Enter the password and click Submit. The default password is 123456.
Unique passwords for each handset are not remembered.
NOTE
When connection is established between the program and the handset, the Handset connected indicator turns green and Connected displays on the prompt line. The handset is now ready for configuration. See
Figure 3-4.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
3-4 Using the Admin Tabs
Figure 3-4
Connect tab prompt indicates the Mobile Handset is connected.

Password Configuration

The password is a security measure to restrict access to the Admin menu settings. Prior to changing a password, the existing password must be entered. The new password must be entered twice for confirmation. If a password is desired to gain access to the handset's Admin menu, select the Enable password checkbox. If no password is desired, clear the Enable password checkbox. A password may be up to 18 characters. See Figure 3-5.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Using the Admin Tabs 3-5
Figure 3-5
Password change tab window

Character table

Table 3-1 illustrates how numbers and letters are entered on the
handset's keypad. The CAPS/caps softkey toggles to allow both upper
owercase letters. Only English characters are allowed.
and l
Table 3-1 Handset character entry table
Key caps CAPS
1 1 1 2 2 a b c 2 A B C 3 3 d e f 4 4 g h i 4 G H I 5 5 j k l 6 6 m n o 6 M N O 7 7 p q r s 8 8 t u v 8 T U V 9 9 w x y z 0 0 0
* * - _.! $% & ' () +
# # <space>
3 D E F
5 J K L
7 P Q R S
9 W X Y Z
,:; / \ = @ ~
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
3-6 Using the Admin Tabs

Error Information

The Error info tab (Figure 3-6) provides a utility to assist the NEC customer service team to troubleshoo by customer service, this utility enables you to save any errors as a file, which can then be sent to your NEC representative for handling.
Use the Br Future saves will point to this same location as the default, so that the same file may be overwritten if desired. A drop-down list box displays the most recently used filenames.
The File tim the Save error info as file window.
owse button to establish the path and enter the filename.
e window displays the modification timestamp of the file in
t handset errors. When directed
Figure 3-6
Power off handset and place it Click the Get file
handset to the location. The Read/Write indic A progress indicator above the prompt line displays the file transfer
progress.
Error information tab screen
button to save the file. The file will be copied from the
ators will reflect the action as it occurs.
in the Dual Charger.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1

Software Updates

NOTE
CAUTION
Using the Admin Tabs 3-7
The Firmware tab allows you to copy software updates to the mobile handset's memory after they are downloaded from a website.
To install manual updates
Step 1 NEC MH150 and MH160 Mobile Handset software updates can be
procured from NEC NTAC.
Step 2 Extract the bin files from the zip file to a folder set up for this purpose.
Each file must be individually downloaded into the handset.
This is not an efficient method of updating any quantity of handsets, but it works for testing new code and in extremely small installations.
Be aware that if there is a TFTP server broadcasting a different version of the handset code, the handsets will continue to download code over the air and revert to the different version. Remove handset code from the TFTP server or disable broadcasting before relying on this update procedure.
Figure 3-7
Step 3
Use the Browse button to locate the software file. The drop-d own list box displays the most recently used filenames. The File time window displays the modification timestamp of the file in the Firmware file window.
Firmware tab displays current file information
Step 4 Check the file version and handset version for comparison. Once the
update is complete, the file version will have overwritten the handset version and these two file versions will match.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
3-8 Using the Admin Tabs
Step 5 Verify that the information in the File ver window is the correct file to be
Step 6 (Conditional) Should an Error indication occur, retry the update after
downloaded and then click the Update button. This file copies from the location to the handset. The Read/Write indicators reflect the action as it occurs.
While a firmware update is in progress, you may open other tabs and the
et indicators shown on those tables will inform you of the status of
hands the update.
ensuring that the handset is properly seated and that the USB cable is in good condition and connected securely. Contact Customer Service if an error persists. See About This Guide for contact information.
Figure 3-8
Firmware update ready to begin
Note that the firmware file path, file time, file version and handset version shown in the above example screen are for illustration only.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1

Version

Using the Admin Tabs 3-9
The Version tab (Figure 3-9) displays the serial number of the handset and the current version of the Handset Administr
ation Tool software.
Figure 3-9
Version tab displays current Handset information
Update Mode allows you to select where and how you want to check for updates to the program. The program can be updated from either of two locations—FTP Update or Local File Update.
Updates may be installed either automaticall Automatic option sets the program to automatically check the FTP site for updates every time the HAT program is launched. The Disable option disables the automatic check and allows you to manually update the program by clicking the Update Now button. Any computer that is not connected to the internet should be set to Disable.
y or manually. The
Depending on the Update Mode s be used to check the FTP site for an update or to browse to a local location,
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
etting, the Update Now button can
3-10 Using the Admin Tabs

FTP Update

The FTP Update option retrieves the update from an FTP site. During the update process, the program is downloaded to the connected computer and that computer's version of the program is updated. In order to use this option, the computer must have access to the internet.
Step 1 Click Update Now to start the FTP update process.
Figure 3-10
Version tab displays the FTP update progress
Step 2 If the Automatic option is selected, the following prompt (Figur e 3-11) will
appear before the update is
installed. Click OK to continue.
Figure 3-11
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Mobile Handset update prompt
Step 3 Click OK to continue.
The update will be installed by overwriting the previous version. See
Figure 3-12.
Using the Admin Tabs 3-11
Figure 3-12
NOTE
Confirmation of new application installation
Step 4 Once the update is downloaded, you can copy the.pkg file to a local
location and update other computers using the Local File Update option. See below.

Local File Update

You must obtain the.pkg file to perform a local update. Use the FTP update option explained above or a service option to obtain the.pkg file. Copy the.pkg file to an accessible location.
The MH Administration Tool must already be installed on any computer that is being updated. Install the MH Administration Tool software first, and then update it.
The following procedure is used for a local file update.
Step 1 Open the MH Administration Tool and click the Version tab. See Figure
3-13.
Step 2 Click the Local File Update option. Step 3 Click Update Now.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
3-12 Using the Admin Tabs
Figure 3-13
Local file update initiation
Step 4 Browse to the location of the.pkg file and click it.
Figure 3-14
Figure 3-15
Step 5 Click OK to continue. See Figure 3-14.
Handset Administration Tool upgrade confirmation dialog box
Step 6 Click OK to continue. This will install the update by overwriting the
previous version. See Figure 3-15.
Confirmation of HandsetAdmin shutdown
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
4
Using the Settings Editor
The handset has two menus with configurable options - the Admin menu and the Config menu. The Admin menu contains administrative options that can be password protected. The Config menu has options that enable the end user to customize settings for user preferences. The Settings tab allows you to configure both required and optional settings in the Admin and Config menus. Specific configuration requirements are detailed in the NEC MH150 and MH160 Mobile Handset Administration Guide document.
4-1

Opening the Settings Editor

The Settings tab displays the serial number of the handset and the software version being run.
To enter and modify menu settings you will need to open the Settings Editor. See
Figure 4-1. Click the Show Settings Editor button.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
4-2 Using the Settings Editor
Figure 4-1
Settings Editor on the Settings tab window
When you have opened the Settings Editor, you may close the Admin Tabs.
If you plan on editing other handsets, consider selecting the Remember Password checkbox located in the Connect tab. Refer to Figure 3-3, “Prompt to enter the
NOTE
password and remember password checkbox.” on page 3-3.
To open the Admin Tabs again, go to the Settings Editor menu bar and select either View > Admin Functions, or any of the options listed under the Admin menu item.

The Settings Editor Screen

The Settings Editor is a powerful utility that allows you to edit or set any Admin menu or config menu opt ion. T he Settings Editor (Figure 4-
2 on page 4-3) includes the following areas:
• Toolbar to execute configurations and save files
• Tabs to organize configuration options
• Radio buttons to define
Editable settings that l
Hands
have been copied from Editable settings options to be downloaded to a handset.
et settings that have either been uploaded from a handset or
the type of option
ist handset options
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
NOTE
Using the Settings Editor 4-3
The Handset Settings Editor screen shot (Figure 4-2) is for example only and may not match the options or settings for your system's protocol.
Toolbar
Tabs
Radio
Buttons
Figure 4-2
Handset Settings Editor Network Config screen
Options that can
be edited
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Options to/from
the handset
4-4 Using the Settings Editor

The Settings Editor Toolbar

The Settings Editor toolbar (Figure 4-3) allows you to manage configuration files and download and upload configuration settings to
from the handset in the charger.
and
Figure 4-3
Settings Editor toolbar

File management

The three filename windows, System, Group and User match the three columns of radio buttons along the left side of the window. The Sys Grp Usr radio buttons allow you to designate the option(s) for System, Group or User files. The three windows in the File management section allow you to name, open, or save setting types as separate files.
For example, system types relate to settings and regulatory domain. Group types relate to Push-to-talk options. User types reference name, extension and profile options.
The file indicators beside the Save As b indicate the status of the file displayed in the window:
Red: file d
saved.
Green:
field(s) which have not been saved to a file yet.
Gray: fi By default, the files will be saved in the A
folder where the program is stored. Use the File menu to set up your own file structure, if desired.
oes not exist. The filename in the window has not been
unsaved edits. Changes made in the Editable settings
le up-to-date. The settings have been saved.
network options such as security
uttons have three colors to
pplication folder under the

Copy settings

The Copy settings arrows and checkboxes allow you to copy between the Handset settings column and the Editable setting column. The Sys Grp Usr checkboxes allow you to copy just the settings you require.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1

Tab Options

Using the Settings Editor 4-5

Upload/download and indicators

When the Read Handset and Write Handset buttons are clicked, they initiate the transfer of configuration data from or to the handset in the charger. The handset indicators change color to indicate the state of the transfer. See “Indicators” on page 3-2 for indicator color significance.
A tab system organizes the options. See . Tabs on the Settings Editor window
Each tab contains options from the Admin menu and/or the Config menu (see Table 4-1). Admin menu options are password protected and usually set by the system administrator. Config menu options are
vailable to the end user but are also offered here for initial
a configuration of key setti ngs. Specific options vary by protocol.
Table 4-1 Tab options on the Settings Editor window
Tab Contents-Admin Menu Contents-Config Menu
Phone config
Network config
Push-to-talk Admin
Push-to-talk User
Extension # and User Name Time Zone Daylight Saving Protected Speed dial Speakerphone Location Service
IP Addresses SSID Security Regulatory Domain Diagnostics
Enabled/Disabled Priority Channel and Name Allowed Channels Name Channels
N/A PTT Audio Volume
Keypad Autolock Display Contrast Hearing Aid Startup Song Predial Active User Profile
N/A
N/A
PTT Tone Volume Default Channel Subscribed Channels
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
4-6 Using the Settings Editor
Tab Contents-Admin Menu Contents-Config Menu
NOTE
NOTE
Profiles:
Silent Vibrate Loud Soft Custom
N/A Noise Mode
Ring in Speaker/ Headset Warning Tones Key Tones Push-to-Talk
(Ring option) Telephone Ring Message Alert 1 Message Alert 2
(Ring option settings) Ring Cadence Ring tone Ring volume Vibrate Cadence Ring Delay
For user convenience and efficiency, when the Write Handset button is clicked, every option set under the Handset settings column in all nine tabs is written at the same time. Each tab's options are NOT written separately. Be sure that you set all options before copying the configuration to the handset.
Your handsets may have different options than those available in the Handset Administration T ool. When a handset is placed in the cradle, it is checked for certain features, such as the Regulatory Domain version. The HAT will turn controls on/off based on the information that it gathers. If your handsets have options that are not yet programmed into the HAT, those options will require manual setting if the factory default is not desired.

Creating a Configuration Plan

Although not necessary for using the Handset Administration Tool, a configuration plan can maximize its efficiency and save countless hours of handset option management. An example of a configuration plan is provided in Table 4-2, “Configuration planning
page 4-8.

Organize the plan

Determine which options should be ca teg orized as each type—system, group or user. Generally , system options are listed on the Network tab, group options are on the PTT tabs and user options are on the profile tabs. The Phone Config tab contains a mix of user and system types.
Do not create a plan that saves an option in two different categories. Option categories should be established and should not overlap. Example: Speakerphone
NOTE
and Push-to-talk settings are typically tagged as Grp options and saved as Group files.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
worksheet sample,” on
NOTE
Using the Settings Editor 4-7

Create the options and save the settings

Once you have established which options will be categoriz ed as System, Group or User, enter the configuration information into the Editable settings fields.
Start with the System options and enter al such as IP addresses, security, and reg domain. Click the Sys radio button on the left side of the window for each option. Save these settings as a System file by entering a descriptive filename in the System filename field and clicking Save As. See the example in
Table 4-2, “Configuration planning worksheet sample,” on page 4-8.
Note that when a setting is changed, the option label is highlighted in yellow until it is saved.
In the same way, create each Group plan by entering the values in the fields designated as Group types. Click the Grp radio button on the left side of the window for each option. Save each plan under a different name in the Group filename field. You may have several groups— possibly divided by sets of PTT users.
It is recommended that you establish one generic User fil default (or desired) values for each User field. Click the Usr radio button on the left side of the window for each option and save the generic user file.
l system-level field values,
e that has the
If desired, user settings can be saved for
each user, if desired, as each handset is configured. If you determine that each handset configuration should be saved, it is easiest to do this during the configurat ion process. See “Downloading a configuration plan to a handset” on page 4-9.
Alternately , you can upload options from a correctly -configured handset;
y them to the Editable settings column, categorize them and save
cop them. See “Uploading a configuration plan from a handset” on page 4-
10.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
4-8 Using the Settings Editor

Configuration planning worksheet (sample)

Use the worksheet in Table 4-2, or a similar worksheet to design your configuration plan.
Table 4-2 Configuration planning worksheet sample
Plan category __System______ Filename __System01____
Sys Grp Usr Label Editable Setting
Time Zone -7 Mountain Daylight Saving DST Auto (USA)
Protected Speed Dial Number
Protected Speed Dial Name Security
5555
Assign to Speakerphone Enabled Predial Enabled
The settings in the table above are executed in Figure 4-4.
1
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
Using the Settings Editor 4-9
Figure 4-4
Handset Settings Editor example

Downloading and Uploading Configuration Plans

Once your configuration plans are established, the settings are easily downloaded into the handsets.

Downloading a configuration plan to a handset

Step 1 Use the Open button located in the File management section on the
toolbar to open the System, Group and User cfg files for this handset.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
4-10 Using the Settings Editor
Step 2 In the Editable settings fields, enter the Extension and User name for
Step 3 Copy the settings to the Handset settings fields using the Copy
Step 4 Click Write Handset.
Step 5 (Conditional) If you wish to save the settings unique to this handset,
Step 6 When the Handset indicator turns off, the downl oad has finished and the

Uploading a configuration plan from a handset

Step 1 Click the Read Handset button to begin the upload.
this handset. Note that the Extension field has a Next button that is useful when configuring a quantity of handsets.
settings arrow.
Y ou m ay want to save the configuration, load new files or edit s
ettings for
the next handset (steps 1 and 2) during the download.
enter the identifying information into the filename fields, such as user name or extension number and then click Save As.
handset may be removed from the charger.
Step 2 You may copy these settings over to the Editable settings fields using
the left Copy settings arrow to use them to create configuration plans as described above or to save them by user or extension.

Regulatory Domain Mismatch

The options that are available on the Settings Editor may not match the options currently enabled on the handset. This could happen if you update the software in the handset without also updating the MH Administration Tool. Or you could update the MH Administration Tool but not the handset software. In either of these situations different options may appear on the MH Administration Tool than are available in the handset.
If the Regulatory Domains in the handset are not supported by the
urrently installed version of the MH Administration Tool, a warning
c message will appear:
Warning: Regulatory domain support is down level with respect to this phone's firmware version. Recommend upgrading the application.
This message indicates that the MH Administration Tool software needs to be updated. Please see “Software Updates” on page 3-7.
If it is necessary to down rev the handset and MH Administration Tool
this message could also appear. If so, reset the handset defaults
code, and proceed with configuration.
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide - Issue 1
For additional information or support on this NEC Unified Solutions,
Inc. product, contact your NEC Unified Solutions, Inc. representative.
NEC
NEC MH150/MH160 Mobile Handset Administration Tool-Installation and User Guide
NEC Unified Solutions, Inc.
NDA-30922, Issue 1
Loading...