NEC MultiSync® MD213MG
21.3” high-resolution 3MP grayscale LCD display
ideal for medical imaging applications
Designed exclusively for the demanding needs of radiology and
PACS, the NEC MultiSync MD213MG, a 21.3” 3-Megapixel (MP)
grayscale display, delivers unrivaled imaging performance. Benefits
you’ll realize from this medically certified display include:
• NEC’s UA-SFT 3MP (1536 x 2048) liquid crystal technology offers
long life at high brightness without compromising contrast or
viewing angles, resulting in outstanding grayscale image quality.
• Digital uniformity correction reduces screen uniformmity errors and
compensates for differences in grayscale and luminance across the
entire screen
• Built-in front sensor constantly monitors calibration and corrects
for minor fluctuations of light output, helping to maintain the
factory calibration throughout the life of the monitor
• Each NEC MultiSync MD213MG monitor is calibrated out of the
box to the DICOM grayscale display function for luminance.
• 12-bit gamma provides for more nely detailed, high-denition
rendering of images and crisper display of even the most delicate
shadings
• GammaComp™ MD software, included with each display, ensures
consistent image quality. The software provides a simple interface
for conformance to the DICOM standard, while providing an easy to-use QA environment for medical imaging. Optionally,
GammaComp MD Administrator provides computer networks with
centralized control and management of multiple display systems.
Medical Desktop
www.necdisplay.com
Achieve complete and brightness uniformity. By nature,
0.0
5.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
45.0
50.0
0 20 40 60 80 100
Before
After
LCD panels contain uniformity errors, which are visible as
slightly brighter or darker areas on the screen. To combat
this inherent trait, each MultiSync MD213MG display is
individually characterized during production using a fully
automated system that measures multiple points across
the screen at different gray levels. These measurements
are used to build a 3-D correction matrix stored inside
the display. This data is used to compensate for the
uniformity not only as a function of position on the
screen but of gray level as well. In turn, this technology
reduces the non-uniformity to virtually unnoticeable
levels and applies a digital correction to each pixel on the
screen to compensate for differences in luminance.
Ambient
light
For optimal image viewing in any lighting condition,
the MD213MGs built-in ambient light sensor can
automatically adjust the calibration of the display to suit
the environment.
For consistent image quality, the
built-in front sensor constantly
monitors and maintains
brightness for optimal DICOM
GSDF calibration. For non-
assisted conformance, calibration
and reporting functions, the
sensor is capable of measuring
monitor brightness, whitepoint
and contrast response.
Model
Display
Viewable Size Image
Pixel Pitch
Pixels Per Inch
Brightness (typical)
Contrast Ratio (typical)
Viewing Angle (typical)
Response Time (typical)
Panel Bit Depth
Synchronization Range
Horizontal
Vertical
Video Bandwidth
Input Signal
Video
Sync
Inputs
Resolutions Supported (Analog/Digital)
Native Resolution
Additional Features
Voltage Rating
Power Consumption (typical)
On
Power Savings Mode
Dimensions (WxHxD)
Net (with stand)
Net (without stand)
Net Weight
(with stand)
(without stand)
VESA Hole Configuration
Specifications
Environmental Conditions
Operating Temperature
Operating Humidity
Operating Altitude
Storage Temperature
Storage Humidity
Storage Altitude
Safety Standards
Limited Warranty**
MultiSync MD213MG
21.3"
0.21mm
120
400 cd/m2 calibrated / 1450 cd/m2 max
900:1
176° Vert., 176° Hor. (88U/88D/88L/88R)@ CR>10
Rapid Response™ 24ms (12ms Gray-to-Gray)
12-bit internal LUTs, displays up to 1024 shades of gray out of 4096
31.5 - 93.8 KHz (Analog) / 31.5 - 95.4 KHz (Digital)
50 - 85 Hz
25.2 - 209.3 MHz (DualLink)
Analog RGB 0.7 Vp-p/75 Ohms
Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
DVI-D and DVI-I
640 x 400 @ 70-85 Hz*
720 x 400 @ 70-85 Hz
640 x 480 @ 60-85 Hz
800 x 600 @ 56-85 Hz
832 x 624 @ 75 Hz
1024 x 768 @ 60-85 Hz
1152 x 864 @ 70-85 Hz
1152 x 870 @ 75 Hz
1280 x 960 @ 60 Hz
1280 x 1024 @ 60-85 Hz
2048 x 1536 @ 60 Hz landscape / 1536 x 2048 @ 60 Hz portrait
Ultra-thin frame (bezel), No Touch Auto Adjust™, VESA Mount,
tilt, swivel, height-adjustable stand (5.9 in./150mm), pivot, vacation
switch, 12-bit LUTs, black level adjustment, AmbiBright, ColorComp
uniformity correction, overdrive, Analog/Digital CableComp™, GammaComp™ MD software, standalone calibration
AC 100-120V / AC 220-240V
100W
2W
18. x 17.1 - 23 x 12 in. / 467.8 x 434.3 - 584.3 x 306mm
18.4 x 14.2 x 4.4 in. / 467.8 x 361.6 x 110.7mm
23.5 lbs. / 10.7 kg
16.5 lbs. / 7.5 kg
100 x 100mm
5-35° C / 41-95° F
30-80%
3000m / 9842 ft.
-10-60° C / 14-140° F
10-85%
12,192m / 40,000 ft.
UL/C-UL, UL60601-1, Gost/PCT, PSB, CCC, FCC Class B/Canadian
DOC, C-tick, MPR II / MPR III, VCCI (class 2), JIS C 61000-3-2, static
electricity guideline, low emission guideline, ISO9241-307, TCO
‘03, TCO ‘6, US Mercury regulations, WEEE, RoHs, SASO, Energy
Star, J-Moss, FDA 510k pending, CE-MDD, IRAM, TUV GM, EPEAT,
AAPM-TG-18, DIN V 6868-587 (Germany) CATB
5 years parts and labor, including Advanced Overnight Exchange
* Digital only
** Backlight usage limited to 500 cd/m2 or less for entire duration of
warranty
1600 x 1200 @ 60-75 Hz
1920 x 1200 @ 60 Hz
2048 x 1536 @ 60 Hz
The MD213MG’s design allows you to adjust the display
to your exact ergonomic preferences. In addition to
tilt and swivel functionality, the height adjusts up to
150mm, and the display pivots between landscape to
portrait orientations.
MultiSync is a registered trademark, and ColorComp and
GammaComp are trademarks of NEC Display Solutions. All other
brand or product names are trademarks or registered trademarks of
their respective holders. Product specications subject to change.
3/09 Ver. 2.
©2009 NEC Display Solutions of America, Inc. All rights reserved.
NEC Display Solutions
500 Park Boulevard, Suite 1100
Itasca, IL 60143
866-NEC-MORE
Loading...