NEC MD212MC User Manual

Page 1

NEC MultiSync® MD212MC

21.3” high-bright 2MP color LCD display ideal for color and grayscale medical imaging applications

Designed exclusively for the demanding needs of medical imaging and PACS, the NEC MultiSync MD212MC, a 21.3” 2-Megapixel (MP) color display, features the flexibility of a color display with image performance rivaling grayscale displays. Benefits you’ll realize from this medically certified display include:

• NEC’s UA-SFT liquid crystal technology offers high brightness without compromising contrast or viewing angles, making the

image quality outstanding for color or grayscale images

• ColorComp™ digital uniformity correction reduces screen uniform-

mity errors and compensates for differences in color/grayscale and luminance across the entire screen

• Integrated tri-stimulus (three-color) sensor receives more light information than standard (brightness only) sensors and, therefore, is extremely accurate and stable

• Each NEC MultiSync MD212MC monitor comes calibrated out of the box to the DICOM grayscale display function for luminance

• 12-bit RGB lookup tables (LUTs) for gamma provide for more

ﬁnely detailed, high-deﬁnition rendering of color images and crisper display of even the most delicate shadings and color differences

• GammaComp™ MD software, included with each display, ensures consistent image quality. The software provides a simple interface for conformance to the DICOM standard, while providing an easy to-use QA environment for medical imaging. Optionally, Gamma-

Comp MD Administrator provides computer networks with central ized control and management of multiple display systems.

Medical Desktop

www.necdisplay.com

Page 2

Achieve complete color and brightness uniformity. By

0.0

5.0

10.0

15.0

20.0

25.0

30.0

35.0

40.0

45.0

50.0

0 20 40 60 80 100

Before

After

nature, LCD panels contain uniformity errors, which are visible as slightly brighter or darker areas on the screen.

To combat this inherent trait, each MultiSync MD212MC

display is individually characterized during production using a fully automated system that measures multiple

points across the screen at different gray levels. These

measurements are used to build a 3-D correction matrix stored inside the display. This data is used to compensate for the uniformity not only as a function of position on the screen but of gray level as well. In turn, this technology, called ColorComp, reduces the non-uniformity to virtually unnoticeable levels and applies a digital correction to each pixel on the screen to compensate for differences in color and luminance.

Ambient light

For optimal image viewing in any lighting condition, the MD212MC’s built-in ambient light sensor can automatically adjust the calibration of the display to suit the environment.

For non-assisted conformance,

calibration and reporting functions, a built-in remote sensor is capable of measuring monitor brightness, whitepoint and ambient lighting, while

performing a quality check for DICOM conformance and

contrast response.

Model

Display Viewable Size Image Pixel Pitch Pixels Per Inch Brightness (typical) Contrast Ratio (typical) Viewing Angle (typical) Response Time (typical) Panel Bit Depth

Synchronization Range Horizontal Vertical Video Bandwidth

Input Signal Video Sync

Inputs

Resolutions Supported (Analog/Digital)

Native Resolution

Additional Features

Voltage Rating

Power Consumption (typical) On Power Savings Mode

Dimensions (WxHxD) Net (with stand) Net (without stand)

Net Weight (with stand) (without stand)

VESA Hole Conﬁguration Speciﬁcations

Environmental Conditions Operating Temperature Operating Humidity Operating Altitude Storage Temperature Storage Humidity Storage Altitude

Safety Standards

Limited Warranty**

MultiSync MD212MC

21.3"

0.27mm 94 400 cd/m2 calibrated / 850 cd/m2 max 1050:1

178° Vert., 178° Hor. (89U/89D/89L/89R)@ CR>10 Rapid Response™ (20ms Gray-to-Gray) 12-bit internal LUTs, displays 16.7 million colors out of 68.5 billion color palette and 256 shades of gray out of 4096

31.5 - 91.1 KHz (Analog/Digital) 50 - 85 Hz

25.2 - 162 MHz (DualLink)

Analog RGB 0.7 Vp-p/75 Ohms Separate sync: TTL Level (Positive/Negative) Composite sync: TTL Level (Positive/Negative)

Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)

DVI-D, DVI-I and VGA 15-pin D-sub

640 x 400 @ 70-85 Hz* 720 x 400 @ 70-85 Hz 640 x 480 @ 60-85 Hz 800 x 600 @ 56-85 Hz 832 x 624 @ 75 Hz 1024 x 768 @ 60-85 Hz 1152 x 864 @ 70-85 Hz 1152 x 870 @ 75 Hz 1280 x 960 @ 60 Hz 1280 x 1024 @ 60-85 Hz

1600 x 1200 @ 60 Hz landscape / 1200 x 1600 @ 60 Hz portrait

Ultra-thin frame (bezel), VESA Mount, tilt, swivel, height-adjustable stand (5.9 in./150mm), pivot, vacation switch, 12-bit LUTs, black level

adjustment, ColorComp uniformity correction, overdrive, Analog/Digi-

tal CableComp™, GammaComp™ MD software, standalone calibration, DICOM GSDF calibration, front sensor with automatic backlight

feedback system, AmbiBright ambient light sensor

AC 100-120V / AC 220-240V

100W 2W

18.4 x 17.1 - 23 x 12 in. / 467.8 x 434.3 - 584.3 x 306mm

18.4 x 14.2 x 4.4 in. / 467.8 x 361.6 x 110.7mm

23.5 lbs. / 10.7 kg

16.5 lbs. / 7.5 kg

100 x 100mm

5-35° C / 41-95° F

30-80% 3000m / 9842 ft.

-10-60° C / 14-140° F

10-85% 12,192m / 40,000 ft.

UL/C-UL, UL60601-1, Gost/PCT, PSB, CCC, FCC Class B/Canadian DOC, C-tick, MPR II / MPR III, VCCI (class 2), JIS C 61000-3-2, static electricity guideline, low emission guideline, TUV-Ergonomie, US Mercury regulations, WEEE, RoHs, SASO, Energy Star 4.0 Tier 2, JEITA VOC Guideline. J-Moss, FDA 510k pending, CE-MDD Class 1, AAPM-TG18

5 years parts and labor, including Advanced Overnight Exchange

* Analog only ** Backlight usage limited to 30,000 hours at 400 cd/m2 or less

1400 x 1050 @ 60-75 Hz 1440 x 900 @ 60 Hz 1600 x 1200 @ 60-75 Hz

The MD212MC’s design allows you to adjust the display to your exact ergonomic preferences. In addition to

tilt and swivel functionality, the height adjusts up to 150mm, and the display pivots between landscape to portrait orientations.

MultiSync is a registered trademark, and ColorComp and

GammaComp are trademarks of NEC Display Solutions. All other

brand or product names are trademarks or registered trademarks of their respective holders. Product speciﬁcations subject to change. 1/09 Ver. 2.

NEC Display Solutions

500 Park Boulevard, Suite 1100 Itasca, IL 60143 866-NEC-MORE